南京地区污水厂、自来水厂及长江水域MCR-1和NDM-1携带菌耐药特征

为了研究以多粘菌素耐药基因(MCR-1)和新德里金属β-内酰胺酶-1基因(NDM-1)携带菌为代表的"超级细菌"在地表水中的环境行为,以长江南京段典型水域及邻近城市污水厂和自来水厂为研究对象,考察了MCR-1和NDM-1携带菌的耐药特性及其变化特征。结果发现,污水厂进水和生物处理单元2种细菌耐药能力均处于较高水平,随处理流程呈降低趋势,至消毒出水中不再被检出。长江中MCR-1携带菌耐粘菌素的半抑制浓度(EC50)较高,平均达37.89 mg·L-1,顺水流方向无显著降低。仅在下游朱家山河汇入口和长江大桥附近滨江公园检出较高耐药水平的NDM-1携带菌。2种细菌耐药水平受水体污染程度和人类活动影响较明显。自来水厂MCR-1携带菌数目较少,但其EC50平均可达32.75 mg·L~(-1),常规处理单元中未检出NDM-1携带菌。水处理工艺显著降低了细菌耐药水平,但排泥水中2种细菌均检出,且耐药水平相比进水显著提高。本研究可为评价水介质中超级抗性基因及其携带菌的环境风险提供参考。     

微塑料对环境中有机污染物吸附解吸的研究进展

微塑料已成为新的全球性环境污染问题。作为强吸附剂,微塑料可以吸附共存的有机污染物,进而改变其环境行为和毒性;也可以通过解吸作用促进污染物在不同介质中的迁移。因而,微塑料与有机污染物的相互作用强度和机理是全面评估两者的环境风险和深度研究微塑料毒性机制的必要信息。目前微塑料研究处于快速发展的起始阶段,加之微塑料本身成分、粒径、表面风化情况的复杂性及共存有机污染物的多样性使两者的相互作用十分复杂,亟需理清微塑料吸附解吸作用的影响因素和相关机制。因而,本文详细综述了微塑料对有机污染物吸附解吸作用的研究进展,并着重从微塑料性质(成分、粒径和表面风化)、有机污染物性质和水环境介质性质方面探讨了吸附的影响因素和相互作用机制,希望为微塑料吸附有机污染物及吸附的后续影响研究提供借鉴与参考。     

Quantitative health risk assessment of inhalation exposure to automobile foundry dust

With a growing awareness of environmental protection, the dust pollution caused by automobile foundry work has become a serious and urgent problem. This study aimed to explore contamination levels and health effects of automobile foundry dust. A total of 276 dust samples from six types of work in an automobile foundry factory were collected and analysed using the filter membrane method. Probabilistic risk assessment model was developed for evaluating the health risk of foundry dust on workers. The health risk and its influencing factors among workers were then assessed by applying the Monte Carlo method to identify the most significant parameters. Health damage assessment was conducted to translate health risk into disability-adjusted life year (DALY). The results revealed that the mean concentration of dust on six types of work ranged from 1.67 to 5.40 mg/m³. The highest health risks to be come from melting, cast shakeout and finishing, followed by pouring, sand preparation, moulding and core-making. The probability of the risk exceeding 10⁻⁶ was approximately 85%, 90%, 90%, 75%, 70% and 45%, respectively. The sensitivity analysis indicated that average time, exposure duration, inhalation rate and dust concentration (C) made great contribution to dust health risk. Workers exposed to cast shakeout and finishing had the largest DALY of 48.64a. These results can further help managers to fully understand the dust risks on various types of work in the automobile foundry factories and provide scientific basis for the management and decision-making related to health damage assessment.

     

Propagation characteristics of subaerial landslide-generated impulse waves

Environmental Fluid Mechanics - Subaerial landslide-generated impulse waves were investigated in a rectangular prismatic channel based on the Froude similarity criterion. Landslides were modeled...     

Photochemical degradation kinetics and mechanisms of norfloxacin and oxytetracycline

Environmental Science and Pollution Research - The photochemical degradation of norfloxacin (NOR) and oxytetracycline (OTC) was investigated under ultraviolet (UV) irradiation. The results...     

Using hyper-spectral indices to detect soil phosphorus concentration for various land use patterns

This study provides earthworm population data obtained from localities with a substantial anthropogenic impact spoils. The spoil heaps were reclaimed at the end of an opencast brown coal mining period. We studied spoils reclaimed by the two most commonly used reclamation processes: forestry and agricultural. The results show the significance of the locality age and the utilized reclamation process and treatment and their effect on earthworm communities. Our data indicate that apart from soil physical and chemical properties, the reclamation process itself may also induce viability and distribution of earthworm communities. Under standardized soil properties, the changes in earthworm populations during the succession were larger within the agricultural reclamation process as opposed to the forestry reclamation process for earthworm ecological groups and individual species.     

Characteristics analysis of near-field and far-field aerodynamic noise around high-speed railway bridge

Environmental Science and Pollution Research - The aerodynamic noise around the high-speed railway bridge is studied by the train-bridge-flow field numerical model and theory analysis. With the...     

Environmental decentralization,environmental public service,and public health: evidence from 289 cities in China

Environmental Geochemistry and Health - Effective supply of environmental public services (EPS) is important to guarantee the mitigation of residential pollution exposure risk. This study analyzes...     

抑尘液滴与尘堆表面之间的动态接触行为研究

水雾除尘效率来源于尘、雾颗粒之间的固-液动态相互作用,从细观角度出发,系统研究水雾液滴与尘堆表面之间的接触、碰撞行为规律.采用高速摄像、图像分析处理技术,从液滴行为、液滴接触角动态变化2个方面研究了液滴在尘堆表面的动态接触行为规律,并对比分析了液滴表面张力、黏度及尘堆粒径对动态接触行为影响的差异.结果表明,液滴在尘堆表面的动态接触行为分为碎裂直接铺展、回缩和回缩反弹3种模式,其接触模式主要取决于粉尘粒径、液滴黏度.在粒径不断减小的尘堆表面,相同理化性质的液滴的行为模式依次为碎裂直接铺展、回缩、回缩反弹.在保证液滴其他性质相同的条件下,增大液滴黏度会导致液滴回缩及回缩反弹行为模式在粉尘粒径较大的尘堆表面提前发生.伴随着液滴黏度增加或尘堆粒径减小,液滴在尘堆表面的接触角会发生动态波动,出现一定数量的波峰和波谷.     

Correction to: Determination of phthalates in particulate matter and gaseous phase emitted in indoor air of offices

Environmental Science and Pollution Research - A Correction to this paper has been published: https://doi.org/10.1007/s11356-020-11749-1