How to accurately assay the algal toxicity of pesticides with low water solubility

A novel method for assaying and calculating the toxicity of water-insoluble pesticides to green algae has been put forward in this work. First, a solvent is selected for use in bioassays; there should be a detailed screening to identify a solvent with inherently low toxicity to the test organism. Second, the EC50 is determined for selected pesticides by measuring the toxicity of various concentrations of each of the selected pesticides in a fixed concentration of selected solvent. Third, concentrations of the selected solvent are varied and the EC50 of each pesticide tested is assayed at a fixed concentration. Fourth, several suitable groups of solvent concentrations are selected and the corresponding EC50 values of tested pesticides are considered to establish the linear regression equation. Letting the solvent concentration be zero, one calculates the corresponding EC50 value, which corresponds to the inherent toxicity of the tested pesticide.     

Phytoextraction crop disposal--an unsolved problem

Several methods of contaminated crop disposal after phytoextraction process (composting, compaction, incineration, ashing, pyrolysis, direct disposal, liquid extraction) have been described. Advantages and disadvantages of methods are presented and discussed. Composting, compaction and pyrolysis are the pretreatment steps, since significant amount of contaminated biomass will still exist after each of the process. Four methods of final disposal were distinguished: incineration, direct disposal, ashing and liquid extraction. Among them, incineration (smelting) is proposed as the most feasible, economically acceptable and environmentally sound.     

Cu,Cr and As distribution in soils adjacent to pressure-treated decks,fences and poles

Chromated copper arsenate (CCA)-treated wood has been widely used in the Southeastern United States to protect wood products from microbial and fungal decay. The aims of this study were to (1). determine the distribution of arsenic (As), chromium (Cr), and copper (Cu), in soils surrounding CCA-treated wood structures such as decks, fences and poles; and (2). evaluate the impacts of these structures on As, Cr and Cu loading of the soils. Profile and lateral soil samples were collected under CCA-treated decks and adjacent to poles and fences. The results showed elevation of As, Cr and Cu concentrations close to and under the structures, with mean As concentrations as high as 23 mg x kg(-1) close to utility poles compared with less than 3 mg x kg (-1) at distances of about 1.5 m away. Concentrations of As, Cr, and Cu decreased with depth in areas close to CCA-treated poles. However, these results were only apparent in relatively new structures. A combination of weathering and leaching with time may have reduced the impact in older poles. Increased concentrations of As, Cu and Cr were also observed close to CCA-treated decks and fences, with age showing a similar impact. These results are helpful for CCA-treated wood product users to determine the safe use of these structures.     

Decolorizing of lignin wastewater using the photochemical UV/TiO2 process

Studies on applying the photochemical UV/TiO2 oxidation process to treat the lignin-containing wastewater for dissolved organic carbon (DOC), color and reducing A254 (the absorption at the wavelength of 254 nm) have been carried out. The data obtained in this study demonstrate that the UV/TiO2 process is effective in oxidizing the lignin thus reducing the color and DOC of the wastewater treated. The combined UV/TiO2 treatment can achieve better removal of DOC and color than the UV treatment alone. Color removal, based on American Dye Manufacture Index (ADMI) measurement, is greater than 99% if the pH is maintained at 3.0 with the addition of 1 g l(-1) TiO2. When 10 g l(-1) TiO2 is applied, the oxidation reduction potential (ORP) value is reached to result in an 88% removal of both DOC and color. A model was developed based on the variation of ORP during the photochemical reaction to simulate the decoloring process. The proposed model can be used to predict the color removal efficiency of the UV/TiO2 process.     

The influence of pH on the degradation of phenol and chlorophenols by potassium ferrate

This paper presents information concerning the influence of solution pH on the aqueous reaction between potassium ferrate and phenol and three chlorinated phenols: 4-chlorophenol (CP), 2,4-dichlorophenol (DCP), 2,4,6-trichlorophenol (TCP). The redox potential and aqueous stability of the ferrate ion, and the reactivity of dissociating compounds, are known to be pH dependent. Laboratory tests have been undertaken over a wide range of pH (5.8-11) and reactant concentrations (ferrate:compound molar ratios of 1:1 to 8:1). The reactivity of trichloroethylene was also investigated as a reference compound owing to its non-dissociating nature. The extent of compound degradation by ferrate was found to be highly pH dependent, and the optimal pH (maximum degradation) decreased in the order: phenol/CP, DCP, TCP; at the optimal pH the degree of degradation of these compounds was similar. The results indicate that for the group of phenol and chlorophenols studied, the presence of an increasing number of chlorine substituent atoms corresponds to an increasing reactivity of the undissociated compound, and a decreasing reactivity of the dissociated compound.     

Sorption of lead in soil as a function of pH: a study case in México

Reactions of lead sorption onto soil are largely affected by properties and composition of soil and its solution. In this study, the lead sorption onto regosol eutric soil from Francisco I. Madero, Zacatecas, Mexico is evaluated at different pH values. Soil samples were suspended in lead solutions of 10, 25, 50, 100, 150, 200, 300, and 400 mg/l (as Pb(NO3)2). The pH was adjusted at 2, 3, 4, and 5.5 with nitric acid for each of the lead solution concentrations. In all the cases the ionic strength was I=0.09 M with calcium nitrate. The solid-liquid-ratios were fixed in 1:100 and 1:200 g/ml. The results show that lead sorption increases when pH increases. Experimental isotherms were adjusted by both Langmuir and Freundlich models. The Langmuir affinity parameter, K, indicates that the lead sorption capacity of Francisco I. Madero soils is largely perceptible to pH changes.     

Wet air oxidation of a reactive dye solution using CoAlPO(4)-5 and CeO(2) catalysts

Wet air oxidation of a prepared reactive dye solution was performed to assess the efficacy of CoAlPO(4)-5 and CeO(2) as catalysts in the reaction. Via adsorption and oxidation of dye, CoAlPO(4)-5 effectively decreased American Dye Manufacturers Institute and chemical oxygen demand (COD) values in the dye solution. At a reaction temperature of 135 degrees C and an applied pressure of 1.0 MPa, color and COD removal were as high as 95% and 90%, respectively, after 2 h. Active sites on the outer surface of CoAlPO(4)-5 are responsible for adsorption and decomposition of dye while active sites in the pores dominate further destruction and oxidation of intermediate products. Since the outer surface only represents a minor part of the total surface, the color removal does not increase appreciably with loading of CoAlPO(4)-5. The CeO(2) catalyst, calcined from cerium chloride under high thermal impact (type A CeO(2)) was very effective in removing color and COD from the solution. This catalyst demonstrated near 100% color removal at temperatures above 135 degrees C and the COD removal could be above 95% at 165 degrees C. With both CoAlPO(4)-5 and CeO(2) catalysts, COD rose and then fell back during the reaction, a feature typical of a consecutive reaction. In contrast to prepared CeO(2), a commercial CeO(2) did not exhibit any catalytic ability for the removal of color and COD. The durability of both CoAlPO(4)-5 and prepared CeO(2) is considered to be fair.     

不同絮凝剂处理焦化废水的研究

相同条件下用3种常用的聚硅酸盐类絮凝剂（PASS，PZSS，PFSC）和高铁酸钠（Na2FeO4）处理焦化废水，实验结果表明，除聚硅酸铝在去浊方面优于高铁酸钠外，高铁酸钠无论在CODCr、色度去除率及固体悬浮物生成量等方面均优于聚硅酸盐类絮凝剂。     

油泥废弃物的生物修复技术研究

本文利用正交试验 ,探讨了堆腐法处理油泥废弃物过程中调控因子 (肥料、客土、水分和 pH)的影响。结果发现 ,投加一定量的客土是影响处理效果的重要因子。通过正交试验选择和确定的最佳处理条件为 :在自然温度 >2 0℃的情况下 ,客土投加量 2 0 %、肥料 10 %、菌剂 5 %、控制水分 30 % (烘干基 )和pH 7。优化条件的建立为油泥废弃物的深度处理提供了理论依据     

高温与超高温UASB反应器的研究进展

本文介绍了国内外对上流式厌氧污泥床 (UASB)反应器应用于高温和超高温废水处理的研究进展现状 ,探讨了在高温和超高温下UASB反应器接种、启动及其处理效果的特点