Population structure and community characteristics of Acer catalpifolium Rehd北大核心CSCD

Acer catalpifolium Rehd., a critically endangered tree species with an extremely limited range of distribution, is one of the 120 plant species with extremely small populations, as approved by the state forestry administration of the People's Republic of China and requires urgent rescue action. In order to comprehensively understand the population status and the future developmental trend of A. catalpifolium, the plant communities were investigated from 5 sites, including Caishenmiao (CSM), Banruosi (BRS), Zhangshancun (ZSC), Fuhusi (FHS), and Baoguosi (BGS). The population structure of A. catalpifolium as well as the species composition and community characteristics of its habitat were investigated. The results showed that A. catalpifolium is mainly distributed in the evergreen broad-leaved and deciduous broad-leaved mixed forests, in different community layers, namely, the tree layer, shrub layer, and herb layer, and is accompanied by 52, 74, and 52 plant species, respectively. Analyses of the distribution of population abundance revealed that BRS had the largest distribution of A. catalpifolium, accounting for 26.04% of the total population, followed by FHS, ZSC, BGS, and CSM, in that order. Analyses of the community characteristics revealed that the species diversity indices in FHS, BRS, BGS, and CSM were greater than that in ZSC. Analyses of the population age structure of A. catalpifolium revealed the gap in the distribution of the levels of seedlings and young trees. There were serious obstacles to the regeneration of the natural population. We concluded that the obstacle to the regeneration of the population of A. catalpifolium might be caused by the high competitive pressure from the dominant species and the micro-environment in the forest. Understanding the community characteristics and the population structure of A. catalpifolium could provide a theoretical foundation for its reintroduction and recovery. © 2018 Science Press. All rights reserved.     

Assessment and management of urbanization-induced ecological risks

The urban ecological risk incurred during the processes of urbanization has been constantly accumulating, creating a severe challenge for China to achieve sustainable urban development. At present, research on systematic evaluation of urban ecological risks is still inadequate, especially at an urban ecosystem level. In this special issue, we use Xiamen City as an example to identify the sources and receptors of urban ecological risks, to develop a methodology system of urban ecological risk assessment, and to propose a method for the management of urban ecological risks. This special issue contains 11 research articles resulting from a comprehensive research project funded by China’s National Natural Science Foundation. The innovations reported in this special issue include a framework of urban ecological risk assessment and a standardized procedure for carrying out urban ecological risk assessment using multiple stressors and endpoints.     

磺胺类化合物对大肠杆菌突变QSAR预测模型初探

抗生素被广泛应用于医疗、农业和畜牧业等领域,但是长期滥用会促进细菌的突变作用。本文以大肠杆菌(E.coli)为受试生物,测定了10种磺胺类抗生素(SAs)单一暴露时对E.coli的突变效应,采用物化参数Ebinding(抗生素与其靶蛋白的相互作用能力)与突变效应参数lgRC0-2(最高可观测突变促进效应浓度)或lgRCmax(突变促进率最大值对应的浓度),建立了突变效应的QSAR模型,并采用雷达图进行验证。结果表明,lgRC0-2与Ebinding模型和lgRCmax与Ebinding、DMG(偶极矩)模型的拟合系数R2分别是0.888、0.873,即lgRC0-2或lgRCmax与Ebinding相关性均较好,可能由于磺胺类化合物(SAs)会作用于叶酸合成通路,影响嘌呤、嘧啶碱基的合成,从而对E.coli的突变具有促进效应,且雷达图验证表明,上述2个模型均具有良好的内部预测能力。本研究有望为抗生素使用带来的生态风险评价以及药物设计提供相关指导。     

考虑偏应力比影响的主应力轴旋转下重塑黄土变形研究

采用浙江大学空心圆柱扭剪仪对重塑黄土试样进行了3种复杂应力路径下的试验,研究了主应力轴旋转条件下偏应力比η对重塑黄土变形特性的影响。试验结果表明,不同偏应力比下重塑黄土的强度差异较大,η=0.133时归一化强度最小,而η=0.433时强度最大,偏应力比η从0.133到0.5时归一化强度呈现增大—减小—增大—减小的规律。主应力轴旋转对重塑黄土的各应变增量均有影响,并且对中间主应变增量的影响最大,其中大主应变和小主应变在ε-q平面内对称开展,且总体表现出Δεz0,Δεθ0的趋势,中间主应变整体呈现Δεr0的发展趋势,当应力主轴旋转目标角度α45°时,中间主应变呈现出不同的开展形式,重塑黄土在应力主轴旋转下向异性较为显著。     

How aerosol direct effects influence the source contributions to PM2.5 concentrations over Southern Hebei,China in severe winter haze episodes

The aerosol direct effects result in a 3%–9% increase in PM_2.5 concentrations over Southern Hebei. These impacts are substantially different under different PM_2.5 loadings. Industrial and domestic contributions will be underestimated if ignoring the feedbacks. Beijing-Tianjin-Hebei area is the most air polluted region in China and the three neighborhood southern Hebei cities, Shijiazhuang, Xingtai, and Handan, are listed in the top ten polluted cities with severe PM_2.5 pollution. The objective of this paper is to evaluate the impacts of aerosol direct effects on air quality over the southern Hebei cities, as well as the impacts when considering those effects on source apportionment using three dimensional air quality models. The WRF/Chem model was applied over the East Asia and northern China at 36 and 12 km horizontal grid resolutions, respectively, for the period of January 2013, with two sets of simulations with or without aerosol-meteorology feedbacks. The source contributions of power plants, industrial, domestic, transportation, and agriculture are evaluated using the Brute-Force Method (BFM) under the two simulation configurations. Our results indicate that, although the increases in PM_2.5 concentrations due to those effects over the three southern Hebei cities are only 3%–9% on montly average, they are much more significant under high PM_2.5 loadings (~50 μg·m⁻³ when PM_2.5 concentrations are higher than 400 μg m⁻³). When considering the aerosol feedbacks, the contributions of industrial and domestic sources assessed using the BFM will obviously increase (e.g., from 30%–34% to 32%–37% for industrial), especially under high PM_2.5 loadings (e.g., from 36%–44% to 43%–47% for domestic when PM_2.5>400 μg·m⁻³). Our results imply that the aerosol direct effects should not be ignored during severe pollution episodes, especially in short-term source apportionment using the BFM.     

Catalytic reduction for water treatment

Treating water contaminants via heterogeneously catalyzed reduction reaction is a subject of growing interest due to its good activity and superior selectivity compared to conventional technology, yielding products that are non-toxic or substantially less toxic. This article reviews the application of catalytic reduction as a progressive approach to treat different types of contaminants in water, which covers hydrodehalogenation for wastewater treatment and hydrogenation of nitrate/nitrite for groundwater remediation. For hydrodehalogenation, an overview of the existing treatment technologies is provided with an assessment of the advantages of catalytic reduction over the conventional methodologies. Catalyst design for feasible catalytic reactions is considered with a critical analysis of the pertinent literature. For hydrogenation, hydrogenation of nitrate/nitrite contaminants in water is mainly focused. Several important nitrate reduction catalysts are discussed relating to their preparation method and catalytic performance. In addition, novel approach of catalytic reduction using in situ synthesized H₂ evolved from water splitting reaction is illustrated. Finally, the challenges and perspective for the extensive application of catalytic reduction technology in water treatment are discussed. This review provides key information to our community to apply catalytic reduction approach for water treatment.

Open image in new window

     

集成内循环烟气流化床脱硫塔内流动特性

针对脱硫塔内烟气的偏流问题,提出了直导流板加旋流结构的措施,应用CFD软件包FLUENT平台对导流板的尺寸、位置、数量进行了优化,得到了烟气入口调节的优化方案。通过工业流场试验对数值计算结果进行了验证,结果表明:采用烟气调节措施后,流场均匀性得到明显的提高。计算和工业试验数据一致,表明采用合适的计算模型,数值计算能取得良好的模拟结果。     

常温下内循环厌氧反应器的启动研究

研究了内循环厌氧反应器(IC反应器)在常温下处理葡萄糖配水的启动特性。结果表明:在运行温度为25~35℃的条件下,反应器经70 d启动完成,且IC反应器具有较好的处理效果,反应器内能形成大量的颗粒污泥。启动完成后,进水COD浓度在3 000 mg/L左右时,COD去除率一直保持在95%以上,出水COD浓度维持在200 mg/L左右。当HRT为5.8 h,容积负荷为11.9 kg/(m3.d)时,出水VFA低于200 mg/L,产气量为33 L/d,反应器运行正常。     

真菌生物滤池净化苯乙烯废气的研究

采用接种Aspergillus candidus和Penicillium frequentans的真菌生物滤池处理苯乙烯废气,考察苯乙烯在生物滤池中的净化效果和物质转化特性。苯乙烯的进气质量浓度为200～800 mg/m3,气体流量分别为0.28,0.38和0.48 m3/h,对应的气体停留时间分别为60,45和35 s。试验结果表明:苯乙烯在真菌生物滤池中有较好的处理效果,最大去除能力达66.78 g/(m3.h),真菌生物滤池中二氧化碳的产生量和苯乙烯去除量呈线性关系。微生物分析结果表明,接种的Aspergillus candidus和Penicillium frequentans在反应器内能够长期保持优势地位。     

Increasing polybrominated diphenyl ether (PBDE) contamination in sediment cores from the inner Clyde Estuary,UK

The concentrations of 16 polybrominated diphenyl ether (PBDE) congeners in six short sediment cores from the Clyde Estuary were determined by gas-chromatography mass-spectrometry. Total PBDE concentrations ranged from 1 to 2,645 μg/kg and the average concentration was 287 μg/kg. BDE-209 was the main congener and varied from 1 to 2,337 μg/kg. Elevated total PBDE concentrations were observed close to the sediment surface in the uppermost 10 cm of four of the six sediment cores. Comparison of the down core PBDE profiles revealed that the increase was driven by the accumulation of deca-BDE. Although the deca-BDE mix was dominant, the presence of lower molecular weight congeners BDE-47, BDE-99, BDE-183 and BDE-153 at most sediment intervals suggested additional sources of penta-BDE and octa-BDE pollution. Changing PBDE source input was the major factor in influencing the proportion of nona-brominated congeners, although other explanations such as post burial photo-debromination of BDE-209 cannot be entirely discounted. A clear cascading to lower hepta-, hexa-, and penta-homologues was not found. The increase in total PBDE concentrations and particularly the deca-BDE may possibly be ascribed to the use and subsequent disposal of electrical appliances such as televisions and computers. In the Clyde sediments, the proportion of nona-brominated congeners was higher than that reported for commercial mixtures. This might be due to changing sources of PBDEs or post burial photo-debromination of BDE-209.