Cu(Ⅱ)印迹[CTS/PVP]和[CTS/PVP/C]材料的制备及表征

以壳聚糖(CTS)、聚乙烯吡咯烷酮(PVP)、活性炭(C)为基材,Cu(Ⅱ)为印迹离子,制备了CTS/PVP共混印迹球[Cu(Ⅱ)-IICP]和CTS/PVP/C共混印迹球[Cu(Ⅱ)-IICPC].以Cu(Ⅱ)的吸附量作为评价指标,对两种共混印迹球的制备条件进行了优化.研究结果表明,当CTS/PVP的质量比为6∶4,活性炭质量分数为0.6%,Cu(Ⅱ)模板剂质量分数为0.05%,所制备的两种共混印迹球吸附性能较佳,且对Cu(Ⅱ)有较好的选择吸附性.物理吸附分析结果表明,与未印迹相比印迹材料的比表面积明显增大.FTIR谱图分析,Cu(Ⅱ)模板主要与CTS和PVP中的—NH2和—OH发生了配位作用.XRD谱图分析结果表明,CTS与PVP、C、Cu(Ⅱ)之间发生了相互作用,改变了CTS原有的晶体结构,使其结晶度降低.     

建筑垃圾资源化处置技术及装备综述

介绍了国内外有关建筑垃圾资源化处置的相关工艺,并从分选除杂、破碎、筛分、整形强化四方面总结了建筑垃圾资源化处置技术与装备,分析其性能特点及应用范围,为我国相关工艺技术及装备的发展提供参考和借鉴。     

膜生物反应器中EPS的提取方法

以一体式膜生物反应器(MBR)中的活性污泥为对象,以蛋白质、多糖和核酸的提取量作为污泥中附着性胞外聚合物(B-EPS)提取总量的衡量指标,研究了加热法、超声法、NaOH+甲醛法、高速离心法、蒸汽法、硫酸法等6种不同方法对B-EPS提取的最优条件;并在最优提取条件下对B-EPS提取总量进行比较分析,确定最佳B-EPS提取方法。结果表明:超声提取法、高速离心提取法、蒸汽提取法、硫酸提取法对B-EPS的提取总量较低;NaOH+甲醛法对B-EPS的提取总量虽然较高,但易导致测定出现误差,且抽滤时有结晶,影响操作;加热法对B-EPS提取效果较好,对细胞破坏程度小,且操作过程简单。因此,确定加热法为B-EPS的最佳提取方法。     

转炉煤气干法除尘回收系统关键技术的优化应用

转炉煤气干法除尘回收系统在运行中存在较多不稳定因素,故障时有发生,严重制约生产的均衡稳定。通过进行工艺、设备改进,优化应用蒸发冷却器喷淋水水质提升、蒸发冷却器桶壁高效化清理技术、电除尘器泄爆控制技术、电除尘器电场劣化控制技术、电除尘器阴极线在线更换技术等关键技术,逐步完善原技术的固有缺陷,有效解决了各类问题。通过转炉煤气干法除尘回收系统关键技术的优化应用,实现了设备系统的稳定高效运行,使其运行效率达到甚至超过了国内外同行的最好水平,同时使得原转炉煤气干法除尘回收技术得到了有效的补充和完善。     

g 辐照预处理促进剩余污泥发酵产氢的研究

为降低能耗,提高辐照技术的经济性,探讨了在0~9.5kGy范围内,γ辐照剂量对生活污水处理厂二沉池剩余污泥中耗氢菌的抑制效果和对发酵产氢的影响,建立了描述发酵产氢过程及辐照影响的动力学模型.结果表明,γ辐照剂量从0增加至9.5kGy时,污泥溶解率从0增加至4%,上清液中可检测出一定的蛋白质和多糖等物质,其中蛋白质中的氮素占溶出总氮素的90%,表明较低剂量辐照即对污泥菌体造成较明显的破解,这可在一定程度上抑制无法形成芽孢的耗氢菌活性;与之相对应的是污泥发酵产氢能力的明显提升,以葡萄糖为底物(1.0g/L),在35℃和初始pH值为7.0时,当辐射剂量仅为0.5kGy时,累积产氢量即比未辐照时有70%的提升,进一步增加辐照剂量至5kGy,累计产氢量和产氢得率均继续增长且达到最大值,分别为240mL/g葡萄糖和1.93mLH2/mol葡萄糖(发酵液的污泥量达2.0g VSS/L);此后,污泥发酵产氢能力随辐射剂量的增加而降低.修正的Logistic模型能很好地描述本研究中累积产氢量随时间的变化规律,而修正的Han-Levenspiel模型能很好地描述辐照剂量对平均产氢速率的影响.     

光催化氧化（UV+TiO2）法处理印染废水生化出水及其各类有机物去除

采用UV+TiO2光催化氧化法处理印染废水生化出水,考察了反应时间、TiO2投加量以及初始pH对反应的影响,结果表明,TiO2投加量800 mg·L-1,反应时间8 h,反应pH为原水pH(6.5～8.0),在此操作条件下,ADMI7.6、DOC和COD的去除率分别为86%、20%及46%;选取两组反应条件,对其进出水采用XAD-8/XAD-4树脂联用技术,分析疏水酸、非酸疏水物质、弱疏水物质及亲水物质4类有机物的去除情况,结果表明,UV+TiO2光催化氧化处理工艺都能够长期有效去除印染废水生化出水中的弱疏水物质、疏水物质和非酸疏水物质引起的色度.     

Shifts in Microbial Communities,Microbial Biomass and Organic Matter Mineralization for Three Mediterranean Soils Contaminated By Metals

Microbial communities (phospholipid fatty acid pattern, bacterial growing strategies, eco-physiological index (EPI) and total bacteria counts, as a number of heterotrophic cuhurable bacteria), substrate-induced respiration (SIR), and nitrogen mineralization were studied in three Mediterranean soils at three different depth levels (A, B and C). Soils were experimentally treated with a final concentration of 1000 ppm of trace metals (Cu²⁺, Zn²⁺, Al³⁺, Fe²⁺, Pb²⁺, Ni²⁺, Mn²⁺, Cr³⁺ and Cd²⁺). Soils were stored in 571 plastic containers for one year, and watered with 1001 during this period. Leachate was recovered through a bottom tap. Samples of the three depths were studied. Soil microbial communities showed different effects to other studies presented in the literature, but carried out on non-Mediterranean soils. Dramatic differences were found between treated soils and untreated ones, but not between soils or horizons. the treated soil displayed a decrease in CFUs, SIR N-mineralization and EPI together with a dominance of r-growing strategists. the relative moles percent of several PLFAs, especially 15:0, 16: 1ω7, cy17: 0, br18:0 and 18: 1ω7 decreased because of the pollution of soils, whereas 10Me16, 18:2ω6, cy19:0, i16:0 and br17:0 showed higher values than in untreated soils.     

Ecoregions and ecosystem management in China

Ecological regionalization is a base for rational management and sustainable utilization of ecosystems and natural resources. It can provide a scientific basis for constructing healthy ecological environments and making policies of environmental management. In this paper, based on synthetic analysis of the characteristics of the ecology and environments of China, the principles of ecological regionalization are discussed, and indices and nomenclature of ecological regionalization are proposed. The ecoregions on a national scale are divided. The results show that there are 3 domains, 13 ecoregions and 57 ecodistricts. The present scheme can be used as a framework for ecosystem assessment and management. Based on the ecoregions, measurements of management for forest, grassland, agriculture and wetland ecosystems are recommended. The experience and information can be used within and beyond the national scale for land-use planning, biodiversity conservation and ecosystem restoration.     

Characteristics of geological hazards in South China coastal areas and impact on regional sustainable development

Prevention and treatment of geological hazards is important for the sustainable development of human society. Surface geological hazards alone caused direct economic losses of ¥3.47 billion, with 768 deaths and 785 injuries in Guangdong Province, South China, from 1994 to 2005. The major factors causing geological hazards can be categorised into three types: geo-environmental, climatic-meteorological and human activity. Accompanied by rapid economic development and population growth, human activities can cause geological hazards that are as serious as those caused by natural factors. The authors propose some suggestions for prevention and treatment of geological hazards to achieve sustainable development on the Chinese coast.     

Microbial functional genes reveal selection of microbial community by PAHs in polluted soils

This report shows an increase of PAH-related microbial functional genes with PAH concentration in soils. Adaptation of microbial communities to organic pollutants such as polycyclic aromatic hydrocarbons (PAHs) is a crucial issue. However, there is little knowledge on mechanisms ruling microbial community selection. Here, we studied microbial functional genes in soils contaminated by PAHs. We used GeoChip, an advanced functional gene array for gene analysis. Soil PAH concentrations were measured and microbial functional genes were categorized. PAH-related microbial functional genes, bph, nah, nidA, phd, dfb, and qor, were quantitatively expressed. Total microbial functional genes and PAH-related microbial functional genes were compared with PAH concentration by cluster analysis and curve-fitting analysis. We found that the average abundance of PAH-related microbial functional genes increased from 0.13 to 0.33, whereas that of total microbial functional genes decreased from 0.22 to 0.10 when PAHs concentration increased from 1.01 to 164.28 mg kg^?1. It was also found that the classification of microbial community structure characteristics based on PAH-related microbial functional genes was closely similar to the classification based on PAHs concentration. Findings reveal that PAH stress promotes the dominance of PAH-related microbial communities.