Multivariate analysis of mineral constituents of edible Parasol Mushroom (Macrolepiota procera) and soils beneath fruiting bodies collected from Northern Poland

Caps and stipes of 141 fruiting bodies of Parasol Mushroom (Macrolepiota procera) and surface layer of soils collected from 11 spatially distant and background (pristine) areas in Northern Poland were analyzed for Ag, Al, Ba, Ca, Cd, Co, Cr, Cu, Fe, Hg, K, Mg, Mn, Na, Ni, P, Pb, Rb, Sr, and Zn by inductively coupled plasma optical emission spectroscopy and cold vapor atomic absorption spectroscopy. In terms of bioconcentration and bioexclusion concept, K, Ag, Cu, Rb, and P were highly bioconcentrated in caps, and their bioconcentration factor values varied for the 11 sites between 120 and 500—67–420, 70–220, 10–170, and 45–100, respectively. Cd, Zn, Mg, and Na showed bioconcentration factors (BCFs) between 3.3 and 36, 3.7–15, 0.92–6.3, and 1.4–44 while Al, Ba, Ca, Co, Cr, Mn, Ni, Pb, and Sr were excluded (BCF < 1). The Parasol Mushroom is a species harvested in the wild, and its caps are of unique taste and can contain a spectrum of essential and hazardous mineral compounds accumulated at elevated concentrations, even if collected at the background (pristine) areas. These elevated mineral concentrations of the caps are due to the efficient bioconcentration potential of the species (K, Ag, Cu, Rb, P, Cd, Zn, Mg, and Na) and abundance in the soil substrates (Al, Ca, Fe, Mn). The estimated intake rates of Cd, Hg, and Pb contained in Parasol Mushroom’s caps show a cause for concern associated with these metals resulting from the consumption of between 300- and 500-g caps daily, on a frequent basis in the mushrooming season.     

Analysis of brominated flame retardants in house dust

The main objective of this study was to create a robust analytical method to analyse the flame retardants decabromodiphenylether (BDE-209), hexabromocyclododecane (HBCD), and tetrabromobisphenol-A (TBBPA) in house dust in order to estimate the degree of contamination of indoor environment. A liquid chromatography method equipped with a UV-detector and electro spray-tandem mass spectrometry was used to achieve this result. Applying an external calibration for BDE-209, an internal calibration for TBBPA, and a standard addition method for HBCD low limits of quantification were obtained. The analytical procedure was carried out under exclusion of UV-light as the target compounds potentially degrade when being exposed to UV-light. Empirical data were obtained in addition to the dust samples to estimate potential influences of apartment characteristics. A weak correlation between the number of electric devices and TBBPA was found.     

Determination and analysis of PM10 source apportionment during episodes of air pollution in Central Eastern European urban areas: The case of wintertime 2006

Source apportionment of air pollution due to particulate matter with an aerodynamic diameter <10 μm (PM₁₀) was investigated in Central Eastern European urban areas. A combination of four methods was developed to distinguish long-range transport (LRT) and regional transport (RT) from local pollution (LP) sources as well as to discern the involvement of traffic or residential sources in LP. Sources of PM₁₀ events of pollution were determined in January 2006 in representative Polish cities using monitored air quality and meteorological data, backward air mass trajectories, correlation and principal component analysis (PCA). Daily patterns of PM₁₀ levels show that several peak episodes were registered in Poland; January 21–30th being the most polluted days. Air mass back-trajectory analysis shows that all cities were under the influence of LRT from North-eastern origins (Russia–Belarus–Ukraine), most were also under LRT from Southern origin (Slovakia, Czech Republic), and northern cities were under national RT influence. PCA analysis shows that ion-sums of secondary inorganic aerosols account for LRT pollution while arsenic and chromium represents markers of RT (industrial) and LP (residential) sources of PM₁₀, respectively. Determination of several ratios (REG/UB, REG/TRAF, TRAF/UB) calculated between PM₁₀ levels measured at regional background (REG); urban background (UB) and traffic (TRAF) monitoring sites shows that, with ratios REG/UB ≥ 0.57, PM₁₀ episodes in both Szczecin and Warsaw bore a marked RT origin. The lower REG/UB ≤ 0.35 in the Southern cities of Cracow and Zabrze indicates that LP was the main contributor to the observed episodes. Only PM₁₀ episodes in Southern-western Poland (Jelenia Góra) were clearly of LP origin as characterized, by the lowest REG/UB ratio (<0.2). The high TRAF/UB ratios obtained for all cities (close to 1) indicate that there was a great uniformity of PM levels on an urban scale owing to the meteorologically stagnant conditions. A high correlation between PM₁₀, NO₂ and CO confirms that traffic emission represented a common and an important LP source of urban pollution in most Polish cities during January 2006. On the other hand PM₁₀ which is also highly correlated with SO₂ in 4 cities out of 6, indicates that coal combustion through domestic heating or industrial activities was also an important LP source of PM₁₀. Finally, extremely unfavourable meteorological conditions caused by the influence of a Siberian high-pressure system were found to be associated with the occurrence of severe PM₁₀ episodes of pollution.     

Potential resources of post-consumer wood waste in Poland

Journal of Material Cycles and Waste Management - This article presents the results of studies, whose aim was to determine the volume of post-consumer wood waste resources in Poland and propose a...     

Effect of long-term dietary lead exposure on some maturation and reproductive parameters of a female Prussian carp (Carassius gibelio B.)

Lead is reported to be an endocrine disruptor. In the current study, we exposed female Prussian carp to artificial feed, supplemented with five doses of dietary Pb (0, 1 (control), 8, 13, 24, and 49 mg/kg) over either a 24-month period or a 12-month period, followed by further 12 months where the fish were fed the control diet. Periodically, oocyte maturation, gonadosomatic index (GSI), ability to secret luteinizing hormone (LH) as well as gonad Pb concentrations were measured. It was found that the reproductive system of the female Prussian carp is not indifferent to chronic exposure to lead. The negative effect was manifested by a decrease in the GSI after 12 months despite the fact that a higher proportion of oocytes at more advanced maturity stages were concurrently observed. After 12 months of exposure, the effect on LH secretion varied according to the dose. In the group exposed to the lowest dose (8 mg/kg), LH decreased spontaneously, and in the groups exposed to the highest two doses (24 and 48 mg/kg), a significantly higher LHRH-A-stimulated LH secretion was observed. After 24 months of lead exposure, the effects on oocyte maturation and size and on GSI values were not pronounced. Analysis of the effect of lead exposure on LH secretion showed that the relationships were similar to those observed after 12 months but nonsignificant. During chronic a 24-month period exposure to Pb, Prussian carp female appears to acclimate to Pb doses used in the experiment. After 12 months of exposure and 12 months of depuration, the levels of spontaneous and stimulated LH secretion observed in all the groups were similar to the control, which is evidence that depuration eliminates the previously observed effects of exposure to lead. Lead is easily accumulated in the ovary, reaching a fivefold higher level (0.8 mg/kg tissue) compared to the control (0.15 mg/kg tissue), but after discontinuation of exposure, this organ is quickly depurated. The results indicate that environmental Pb can be a potent endocrine disruptor affecting ovarian steroidogenesis, gametogenesis, and ovulation, which may lead to adverse impacts on fish reproduction and population density and that female Prussian carp become resistant to the negative effects of lead with advancing age, and their organs cope by reaching a state of homeostasis.     

Myxococcus xanthus'' killed cells as inducers of struvite crystallization. Its possible role in the biomineralization processes

We studied the possibility of struvite formation using killed cells of Myxococcus xanthus. Cells were killed by heat, UV light and sonication. In all cases, we show that struvite crystallization occurs and we propose that the dead cells or cell debris can act by themselves as heterogeneous crystallization nuclei. We also show that the slime, produced by Myxococcus in a large quantities, is not involved in this process.     

Consumer exposure to pesticide residues in apples from the region of south-eastern Poland

The production of apples in Poland is the largest among the countries of the European Union, and therefore, the consumption of these fruits is high in our country. The aim of this study was to determine the presence of pesticide residues in Polish apples and to assess if these residues pose a risk to the health of the consumer. Furthermore, compliance with legal regulations concerning the use of plant protection products in crop cultivation was ascertained. Pesticide residues were found in 192 samples (61.5 % of tested samples). In six samples (1.9 %), residues exceeded maximum residue limits. Violations concerned the insecticides: indoxacarb, diazinon and fenitrothion. The highest long-term consumer exposure was found in the case of consumption of apples with diazinon residue for both groups, adults and toddlers [4 % acceptable daily intake (ADI), adults; 21 % ADI, toddlers]. The highest values of short-term exposure were obtained in the case of consumption of apples with indoxacarb [5 % acute reference dose (ARfD), adults; 27 % ARfD, toddlers] and fenitrothion (4 % ARfD, adults; 23 % ARfD, toddlers). Although fungicides are the pesticides found most often in apples, the consumption of apples with insecticide residues constitutes the greatest hazard to human health.     

Ambient monitoring of asbestos in selected Italian living areas

This paper presents the results of an intensive monitoring activity of the particulate, fall-out and soil of selected living areas in Italy with the aim to detect the asbestos concentration in air and subsequent risk of exposure for the population in ambient living environments, and to assess the nature of the other mineral phases composing the particulate matrix. Some areas were sorted out because of the presence of asbestos containing materials on site whereas others were used as blank spots in the attempt to detect the background environmental concentration of asbestos in air. Because the concentration of asbestos in ambient environments is presumably very low, and it is well known that conventional low–medium flow sampling systems with filters of small diameter (25 mm) may collect only a very small fraction of particulate over a short period, for the first time here, an intense monitoring activity was conducted with a high flow sampling system. The high flow system requires the use of large cellulose filters with the advantage that, increasing the amount of collected dust, the probability to collect asbestos fibers increases. Both the protocol of monitoring and analysis are novel and prompted by the need to increase the sensitivity towards the small number of expected fibers. With this goal, the collection of fall-out samples (the particulate falling into a collector filled with distilled water during the monitoring shift) and soil samples was also accomplished. The analytical protocol of the matrix particulate included preliminary X-ray powder diffraction (XRPD), optical microscopy and quantitative electron microscopy (SEM and TEM). Correlations with climatic trends and PM10 concentration data were also attempted.The surprising outcome of this work is that, despite the nature of the investigated site, the amount of dispersed asbestos fibers is very low and invariably lower than the theoretical method detection limits of the SEM and TEM techniques for identification and counting of asbestos fibers. The results are compared to the literature data worldwide and an updated model for asbestos fibers dispersion in ambient environments is proposed.