Dissipation kinetics of alpha-cypermethrin and lambda-cyhalothrin residues in aboveground part of white mustard (Sinapis alba L.)

Dissipation of simultaneously applied insecticides alpha-cypermethrin and lambda-cyhalothrin was studied in a minor crop, aboveground part of white mustard (Sinapis alba L.). A validated gas chromatographic method (GC-ECD/NPD) was used to determine insecticide residues. Analytical performances were very satisfactory, with expanded uncertainties not higher than 14% (coverage factor k = 2, confidence level 95%). Dissipation of alpha-cypermethrin and lambda-cyhalothrin in white mustard followed first-order kinetics (R² between 0.953 and 0.995), with half-lives of 3.1–4.6 and 2.9–3.7 days respectively. Based on the results of this two-year study and the relevant residue regulation, alpha-cypermethrin and lambda-cyhalothrin treatments can be considered safe for crop protection, feeding animals and the environment.     

Effect of Nb doping on structural, optical and photocatalytic properties of flame-made TiO2 nanopowder

TiO₂:Nb nanopowders within a dopant concentration in the range of 0.1?C15?at.% were prepared by one-step flame spray synthesis. Effect of niobium doping on structural, optical and photocatalytic properties of titanium dioxide nanopowders was studied. Morphology and structure were investigated by means of Brunauer?CEmmett?CTeller isotherm, X-ray diffraction and transmission electron microscopy. Diffuse reflectance and the resulting band gap energy were determined by diffuse reflectance spectroscopy. Photocatalytic activity of the investigated nanopowders was revised for the photodecomposition of methylene blue (MB), methyl orange (MO) and 4-chlorophenol under UVA and VIS light irradiation. Commercial TiO₂-P25 nanopowder was used as a reference. The specific surface area of the powders was ranging from 42.9?m²/g for TiO₂:0.1?at.% Nb to 90.0?m²/g for TiO₂:15?at.% Nb. TiO₂:Nb particles were nanosized, spherically shaped and polycrystalline. Anatase was the predominant phase in all samples. The anatase-related transition was at 3.31?eV and rutile-related one at 3.14?eV. TiO₂:Nb nanopowders exhibited additional absorption in the visible range. In comparison to TiO₂-P25, improved photocatalytic activity of TiO₂:Nb was observed for the degradation of MB and MO under both UVA and VIS irradiation, where low doping level (Nb?<?1?at.%) was the most effective. Niobium doping affected structural, optical and photocatalytic properties of TiO₂. Low dopant level enhanced photocatalytic performance under UVA and VIS irradiation. Therefore, TiO₂:Nb (Nb?<?1?at.%) can be proposed as an efficient selective solar light photocatalyst.     

Styrofoam debris as a potential carrier of mercury within ecosystems

The present paper falls within the trend of research into interactions between various pollutants emitted anthropogenically into the environment and focuses on mercury and styrofoam debris. The study covers part of the Southern Baltic’s drainage area. Apart from styrofoam and beach sand, the research involved mosses, which are bioindicators of atmospheric metal pollution. The research has shown that mercury present in the environment becomes associated with styrofoam debris. The median for mercury concentrations in virgin styrofoam samples (0.23 ng g^?1 dry weight (d.w.)) and in beach sand samples (0.69 ng g^?1 d.w.) was an order of magnitude lower than in the styrofoam debris (5.20 ng g^?1 d.w.). The highest mercury content observed in styrofoam debris (3,863 ng g^?1 d.w.) exceeded the standards for bottom sediment and soil. The binding of mercury to styrofoam debris takes place in water, and presumably also through contact with the ground. A significant role in this process was played by biotic factors, such as the presence of biofilm and abiotic ones, such as solar radiation and the transformations of mercury forms related to it. As a result, mercury content in styrofoam debris underwent seasonal changes, peaking in summertime. Furthermore, the regional changes of mercury content in the studied debris seem to reflect the pollution levels of the environment.     

Assessment of boscalid and pyraclostrobin disappearance and behavior following application of effective microorganisms on apples

ABSTRACT

The aim of this study is to assess the disappearance of boscalid (IUPAC name: 2-chloro-N-[2-(4-chlorophenyl)phenyl]pyridine-3-carboxamide) and pyraclostrobin (IUPAC name: methyl N-[2-[[1-(4-chlorophenyl)pyrazol-3-yl]oxymethyl]phenyl]-N-methoxycarbamate) residues in apple fruit, and to verify whether an organic fertilizer enriched with strains of antagonistic microorganisms can reduce pesticide residue levels. Field trials were conducted in a commercial orchard on apples of the Gloster variety, during 21 days after the treatment with Bellis 38 WG and the subsequent application of Zumba Plant formulation containing Bacillus spp., Trichoderma spp. and Glomus spp. In control samples, the decrease rate of boscalid and pyraclostrobin residue levels followed an exponential function, described by formulae R_t = 0.2824e^?0.071t and R_t = 0.1176e^?0.060t, with the coefficient of determination of r² = 0.8692 and r² = 0.9268, respectively. These levels dropped to half (t_1/2) of their initial values after 9.8 and 11.5 days, respectively. The treatment with Zumba Plant resulted in a reduction in boscalid and pyraclostrobin residue levels by 52% and 41%, respectively. The results of this study are of importance for horticulture sciences and for producers of apples using plant protection products (PPPs).     

Biodegradation of poly(propylene glycol)s under the conditions of the OECD screening test

Two poly(propylene glycol)s (PPGs): PPG 425 and PPG 725 were tested under the conditions of the OECD Screening Test with activated sludge as inoculum. Tested PPG were the sole source of organic carbon in the test. Quantitative determination of the biodegradation progress was performed by the HPLC with fluorescence detection after derivatisation of PPG with naphthyl isocyanate. The liquid chromatography-mass spectrometry technique was used for identification and semiquantitative determination of metabolites. Separation of PPG and metabolites from the water matrix was performed by liquid-liquid extraction with chloroform. It was found that the shorter PPG 425 is biodegraded significantly worse than the longer PPG 725 and that biodegradation occurs without shortening of the PPG chain for both PPG. PPG molecules are oxidised to ketones and/or aldehydes during the aerobic biodegradation process.     

Integrated survey on toxic effects of lindane on neotropical fish: Corydoras paleatus and Jenynsia multidentata

We report the effect of lindane on fish experimentally exposed to lindane. Sublethal toxicity was assessed through (a) changes in histopathology; (b) the activity of GST in different organs; and (c) bioaccumulation in exposed fish. We present a survey on toxic effects of lindane at these three levels, proposing a sequence of dose-dependent effects. Physiological damage was reversible at lowest doses, but severe at the highest, including damage consistent with fibrosis in liver and karyolitic nucleus in brain of both studied species. Exposure of Jenynsia multidentata above 6 μg L⁻¹ caused activation a GST in liver and gills, followed by inhibition at 75 μg L⁻¹. Interestingly, the bioaccumulation rate was suddenly increased when GST was inhibited. Corydoras paleatus exposed to 6.0 μg L⁻¹ lindane did not present significant changes in GST activity; however, enzymatic inhibition was observed above 25 μg L⁻¹. The bioaccumulation rate in C. paleatus remained constant throughout the experiments. All in all, these results evidence that C. paleatus is more sensitive to lindane than J. multidentata.     

Vehicle Hydrocarbons’ Emission Characteristics Determined Using the Monte Carlo Method

Environmental Modeling & Assessment - Hydrocarbons (HCs) are products of incomplete combustion process which can occur during operation of the internal combustion engines (Flagan and Seinfeld...     

Synthesis and characterization of zeolites prepared from industrial fly ash

In this paper, we present the possibility of using fly ash to produce synthetic zeolites. The synthesis class F fly ash from the Stalowa Wola SA heat and power plant was subjected to 24 h hydrothermal reaction with sodium hydroxide. Depending on the reaction conditions, three types of synthetic zeolites were formed: Na-X (20 g fly ash, 0.5 dm³ of 3 mol?·?dm^?3 NaOH, 75 °C), Na-P1 (20 g fly ash, 0.5 dm³ of 3 mol?·?dm^?3 NaOH, 95 °C), and sodalite (20 g fly ash, 0.8 dm³ of 5 mol?·?dm^?3 NaOH?+?0.4 dm³ of 3 mol?·?dm^?3 NaCl, 95 °C). As synthesized materials were characterized to obtain mineral composition (X-ray diffractometry, Scanning electron microscopy-energy dispersive spectrometry), adsorption properties (Brunauer-Emmett-Teller surface area, N₂ isotherm adsorption/desorption), and ion exchange capacity. The most effective reaction for zeolite preparation was when sodalite was formed and the quantitative content of zeolite from X-ray diffractometry was 90 wt%, compared with 70 wt% for the Na-X and 75 wt% for the Na-P1. Residues from each synthesis reaction were the following: mullite, quartz, and the remains of amorphous aluminosilicate glass. The best zeolitic material as characterized by highest specific surface area was Na-X at almost 166 m²?·?g^?1, while for the Na-P1 and sodalite it was 71 and 33 m²?·?g^?1, respectively. The ion exchange capacity decreased in the following order: Na-X at 1.8 meq?·?g^?1, Na-P1 at 0.72 meq?·?g^?1, and sodalite at 0.56 meq?·?g^?1. The resulting zeolites are competitive for commercially available materials and are used as ion exchangers in industrial wastewater and soil decontamination.     

The Role of Residual Contaminants and Recycling Steps on Rheological Properties of Recycled Polypropylene

Journal of Polymers and the Environment - Recycling of polymers is one of the alternatives to reduce the impact of polymers presence on the environmental. However, the contaminants, defined as...     

Lifestyle and environmental factors may induce airway and systemic inflammation in firefighters

Health status depends on multiple genetic and non-genetic factors. Nonheritable factors (such as lifestyle and environmental factors) have stronger impact on immune responses than genetic factors. Firefighters work is associated with exposure to air pollution and heat stress, as well as: extreme physical effort, mental stress, or a changed circadian rhythm, among others. All these factors can contribute to both, short-term and long-term impairment of the physical and mental health of firefighters. Increased levels of some inflammatory markers, such as pro-inflammatory cytokines or C-reactive protein (CRP) have been observed in firefighters, which can lead to local, acute inflammation that promotes a systemic inflammatory response. It is worth emphasizing that inflammation is one of the main hallmarks of cancer and also plays a key role in the development of cardiovascular and respiratory diseases. This article presents possible causes of the development of an inflammatory reaction in firefighters, with particular emphasis on airway inflammation caused by smoke exposure.