Meiobenthic nematode Oncholaimus campylocercoides as a model in laboratory studies: selection,culture, and fluorescence microscopy after exposure to phenanthrene and chrysene

Environmental Science and Pollution Research - Numerous studies have focused on the response of meiofauna after exposure to polycyclic aromatic hydrocarbons (PAHs), but none has been devoted to...     

Test of APEX for nine forested watersheds in East Texas

Hydrologic/water quality models are increasingly used to explore management and policy alternatives for managing water quality and quantity from intensive silvicultural practices with best management practices (BMPs) in forested watersheds due to the limited number of and cost of conducting watershed monitoring. The Agricultural Policy/Environmental eXtender (APEX) model was field-tested using 6 yr of data for flow, sediment, nutrient, and herbicide losses collected from nine small (2.58 to 2.74 ha) forested watersheds located in southwest Cherokee County in East Texas. Simulated annual average stream flow for each of the nine watersheds was within +/- 7% of the corresponding observed values; simulated annual average sediment losses were within +/- 8% of measured values for eight out of nine watersheds. Nash-Sutcliffe efficiency (EF) values ranged from 0.68 to 0.94 based on annual stream flow comparison and from 0.60 to 0.99 based on annual sediment comparison. Similar to what was observed, simulated flow, sediment, organic N, and P were significantly increased on clear-cut watersheds compared with the control watersheds. APEX reasonably simulated herbicide losses, with an EF of 0.73 and R(2) of 0.74 for imazapyr, and EF of 0.65 and R(2) of 0.68 for hexazinone based on annual values. Overall, the results show that APEX was able to predict the effects of silvicultural practices with BMPs on water quantity and quality and that the model is a useful tool for simulating a variety of responses to forest conditions.     

Hepatoprotective effect of nicorandil against acetaminophen-induced oxidative stress and hepatotoxicity in mice via modulating NO synthesis

Environmental Science and Pollution Research - Acetaminophen (APAP) overdose can produce hepatotoxicity and consequently liver damage. This study investigated the hepatoprotective impacts of...     

Exploring motorcyclist injury severity resulting from various crash configurations at T-junctions in the United Kingdom--an application of the ordered probit models

OBJECTIVES: The fact that motorcycle users tend to be more vulnerable to injuries than those using other motorized vehicles may act synergistically with the complexity of conflicting movements between vehicles and motorcycles to increase injury severity in a junction-type accident. A junction-type collision tends to be more severe than a non-junction case due to the fact that some of the injurious crashes such as angle-collision commonly occur. Existing studies have applied several statistical modeling techniques to examine influential factors on the occurrences of different crashes among motorized vehicles but surprisingly very little has empirically explored whether a particular crash type, resulting from a junction-type accident, is more injurious to motorcyclists. This article attempts to investigate whether a particular collision is more deadly to motorcyclists conditioned on crash occurrence at T-junctions in the U.K., while controlling for environment, vehicle, and demographic factors. METHODS: The statistical modeling technique employed is the ordered probit models using the data extracted from the STATS19 accident injury database (1999-2004). RESULTS: The modeling found determinants of injury severity among motorcyclists at T-junctions in the U.K. For example, an approach-turn/head-on collision is much more injurious to motorcyclists; and, those riding in early morning (i.e., 0000-0659) are more likely to be severely injured. CONCLUSIONS: This study offers a guideline for future research, as well as insight into potential prevention strategies that might help moderate motorcyclist injuries.     

Natural organic compounds as alternative to methyl bromide for nematodes control

Thirty-three organic acids and furfural metabolites were examined for their nematicidal activity against plant-parasitic, free-living and predacious nematodes. Propionic acid, 2-methylhexanoic acid, lactic acid, maleic acid, and furic acid were the most effective nematicides among normal chain organic acids, branched organic acids, hydroxy/keto-acids, dicarboxylic acids and furfural metabolites, respectively. Seven of the tested compounds were found to have more than 90% mortality thus designating them as highly active nematicides. Of the highly active tested compounds, an average octanol/water log P of 0.97 was observed with a range from 0.28 to 2.64, and a Henry's Law constant averaging 2.6 × 10^{? 7} atm.m³/mole. Tested chemicals with minor or low nematicidal activity showed an average log P of 1.76 with a range from 0.15 to 3.42 and a Henry's Law constant averaging 16.6 × 10^{? 7} atm.m³/mole.     

Selection of an effective sludge dewatering system for a small wastewater treatment plant

The Jahra Plant was commissioned in 1981 as a secondary treatment plant employing the extended aeration process. The plant has been upgraded since that time by constructing additional tertiary filtration units to improve effluent quality. The plant has a design capacity of 66 000 m³/d. At present, the daily inflow to the plant is about 47 000 m³/d of domestic sewage. The sludge produced at the Jahra Plant can be classified as excess activated sludge which combines the primary and secondary solids. At present, there are 30 drying beds receiving about 100 m³ of sludge dally. Sewage-sludge production represents about 0.5% of the total flow treated at the plant and is increasing yearly with increases in population and water consumption. Present dewatering systems are not adequate to cope with expansion in sewage treatment. Increasing the capacity of the existing plant would require more drying beds that could exacerbate existing odor problems. Some dewatering systems, such as the belt filter press and the centrifuge, have been tested to determine the most effective one under local conditions. Appropriate polymer doses for thickening have been determined. This paper describes present sludge dewatering units and operating techniques which have been developed during the operation of this facility.     

Immobilization of some metals in contaminated sludge by zeolite prepared from local materials

In this study, zeolite was prepared from cheap local Egyptian clay (kaolin) and characterized by X-ray diffraction, X-ray fluorescence spectroscopy, SEM. The prepared zeolite was used as a binder for immobilization of the metals Cd²⁺, Cu²⁺, Ni²⁺, Pb²⁺, and Zn²⁺ in contaminated sewage sludge. Different leaching tests were conducted to determine the efficiency of the prepared zeolite for metal stabilization. The leaching of the metals from stabilized sludge decreased as the zeolite amount increased. It was found that 10% of zeolite is sufficient for the stabilization of all metal ions under investigation. It was suggested that the metal uptake mechanism by zeolite was by an ion-exchange mechanism. Examination of the solidified sample for its compressive strength after curing for 28 days yielded a value of 0.83?MPa, which indicates that the treated sludge was well solidified and safe to be used in a wide variety of applications, for instance as a raw material for pavement blocks.