Effect of teeth amalgam on mercury levels in the colostrums human milk in Lenjan

Human milk is usually the only source of food for infants during the first 4 to 5 months of their life. Maternal environmental mercury exposure is directly related to fish consumption or amalgam filling. In this research, 38 human milk samples were collected from mothers of Lenjan area who were not occupationally exposed with mercury. Mercury concentration in human milk was determined by AMA254 Mercury Analyzer. A level of mercury was examined in relation to somatometric, demographic and dental amalgam parameters. Obtained results showed that only dental amalgam significantly increased the mercury level in human milk (p < 0.001). The mean mercury concentrations in milk of mothers without teeth fillings (n = 13), with one to three teeth fillings (n = 10), and four to eight teeth fillings (n = 15) were 2.87, 5.47, and 13.33 μg/l, respectively. The result of this study also showed a positive correlation of mercury milk levels with the number of teeth fillings of the mother (p < 0.05, r = 0.755). The estimated weekly intake of mercury of a breastfed infant in this study was, in some cases, higher than provisional tolerance weekly intake recommended by FAO/WHO, which pose a threat to their health.     

2-Nitroso-1-naphthol as a selective reagent for preconcentration of cobalt by vortex assisted combined with solidification of organic droplet and its determination by flame atomic absorption spectrometry

Highly rapid and selective vortex-assisted liquid–liquid microextraction based on solidification of organic drop has been used for determination of cobalt ion. 2-Nitroso-1-naphthol (2N1N) was used as a selective complexing agent to form stable cobalt–2N1N complex which can be extracted with 1-undecanol at a short time by the assistance of vortex agitator system followed by its determination using flame atomic absorption spectrometry. In vortex assisted, vigorous vortex stream as well as the vibrant effect of vortex system cause very fine droplets of extraction solvent to be produced and extraction occurred at a short time. Some parameters influencing the extraction process such as pH of samples, concentration of 2-nitroso-1-naphthol, extraction solvent volume, extraction time, ionic strength and surfactant addition, as well as interferences were evaluated in detail and optimum conditions were selected. At the optimum conditions, the calibration curve was linear in the range of 15 to 400 μg L^?1 of cobalt ions. The relative standard deviation based on ten replicate analysis of sample solution containing 50 μg L^?1 of cobalt was 3.4 %. The detection limit (calculated as the concentration equivalent to three times of the standard deviation of the blank divided by the slope of the calibration curve after preconcentration) was 5.4 μg L^?1. The accuracy of the proposed method was successfully evaluated by the analysis of certified reference materials. This selective and highly rapid method was used for determination of cobalt ions in different water samples.     

Mechanical,Morphological and Dynamic Mechanical Analysis of Pineapple Leaf/Washingtonia Trunk Fibres Based Biophenolic Hybrid Composites

In this article, flexural, impact and dynamic mechanical properties of the Pineapple leaf fibres (PALF) and Washingtonia trunk fibres (GW) based bio-phenolic hybrid composites were examined. The pure and hybrid composites were fabricated using the hand lay-up technique with an overall fibre weight ratio of 50% in which GW and PALF were maintained in the fibre weight ratios of 50:50, 30:70, and 70:30 denoted as 1G1P, 3G7P, and 7G3P, respectively. Hybrid composites displayed better flexural strength, flexural modulus and impact strength than the GW composites and better viscoelastic properties than the PALF composites. Results revealed that 1G1P hybrid composites exhibited 25% and 12% improvements in flexural strength and modulus compared to the GW composites. 3P7K composites showed a twofold increase in impact strength than GW composites. The storage modulus of the pure and hybrid composites declined rapidly beyond the glass transition temperature. Furthermore, it was observed that the values of storage modulus for all the composites at 150 °C were similar regardless of the composite configuration. The Peak of loss modulus was found to increase in the following order: GW?>?7G3P?>?3G7P?>?1G1P?>?PALF. Furthermore, the temperature at the peak tan delta was improved, and a reduction in the tan delta peak was observed for hybrid composites compared to the pure composites. Finally, the PALF and GW hybrid combinations can be suitable for use in various applications such as textiles, machinery part production industries, medicine, automobiles, etc.

     

Spatial pattern analysis in Persian oak (Quercus brantii var. persica) forests on B&W aerial photographs

The purpose of this investigation was to develop a method to determine the spatial pattern of trees as a robust indicator to monitor changes from B&W aerial photographs in Persian oak forests of Zagros, Iran. A 500 x 600 m study area was selected in Servak forests next to Yasuj city in Kohgiluyeh-Va-BuyerAhmad Province. All the trees were tagged in the study area and the point map of stems were prepared. The spatial distribution of trees was determined as "dispersed" using nearest neighbour technique. Then the index of "C" calculated by T-square sampling method was applied to the point map of the study area in 30 systematic sample points in a 100 x 100 m network. Comparing the results of this method with the true spatial pattern of the study area showed that "C" can detect the spatial arrangement of trees. Thereafter the index was used on the air photo of the study area that was made of B&W aerial photographs. The method suggested in this study provides a suitable approach for detecting the spatial pattern of trees in Zagros forests on B&W air photos.     

Acute toxicities of cadmium and permethrin on the pre-spawning and post-spawning phases of Hexaplex trunculus from Bizerta Lagoon, Tunisia

Marine gastropods, exposed to anthropogenic pollution, accumulate high chemical concentrations in their tissues, especially in the digestive glands. An evaluation of the impacts of cadmium (Cd) and permethrin (Perm), coupled with reproductive events (pre-spawning and post-spawning phase) throughout the year, was attempted by measuring catalase (CAT), a biomarker of defence, on Hexaplex trunculus experimentally exposed for 48 or 96 h. Specimens of gastropods were sampled from Bizerta Lagoon (Tunisia). The results show that CAT activity increased in gastropods exposed to the three cadmium concentrations (C1 Cd, 100 μg L(-1); C2 Cd, 200 μg L(-1); and C3 Cd, 300 μg L(-1)) and to the three permethrin doses (C1 Perm, 100 μg L(-1); C2 Perm, 150 μg L(-1); and C3 Perm, 200 μg L(-1)) tested. A decrease in CAT was noted in the digestive gland of the H. trunculus exposed to permethrin at the concentration of 200 μg L(-1) during the pre-spawning and post-spawning phases. H. trunculus in post-spawning was more sensitive to cadmium and permethrin than in the pre-spawning phase. The biochemical responses to pollutants (cadmium and permethrin) represented by CAT may act as a biomarker of exposure in this species.     

Tramadol abuse among workers in an industrial city in mid-Nile Delta region,Egypt

Environmental Science and Pollution Research - Tramadol abuse is an increasingly alarming phenomenon among Egyptian Community especially among workers and drivers. Study profile and factors...     

A Critical Review on Natural Fibers Modifications by Graft Copolymerization for Wastewater Treatment

Graft copolymerization is a distinctive approach to modify the inherently cheap natural fibers (NFs) using different initiators to incorporate synthetic polymer side chains allowing development of novel types of hybrid materials. This method has been widely applied to develop a variety of NFs based adsorbents for decontamination of toxic pollutants from the aqueous environment. However, the development of high-performance adsorbents from NFs is steady challenged by the need to preserve the sustainability during graft modifications and applications. This article critically reviews the progress on modifications of NFs by graft copolymerization of polar monomers on NFs using various initiating methods and their applications in wastewater treatment. Particularly, the applications of the grafted NFs in removal of heavy metal ions, synthetic dyes, oil spills and extraction of precious metals from wastewater are elaborated. The critical challenges to the viability and sustainability of NFs-based adsorbents with respect to functionalization by graft copolymerization and environmental impacts are discussed and the future research directions are also outlined.

     

Modelling categorical data to identify factors influencing concern for the natural environment in Iran

Loglinear modelling techniques were used to identify the interactions and interrelationships underlying categorical environmental concern data collected from 9062 respondents in Iran. After fitting various loglinear models to the data, the most parsimonious model highlighted that a combination of interacting factors, namely educational attainment, age, gender, and residential location were responsible for influencing personal concern for the environment. Although high educational attainment had a close correspondence with high concern for the environment the loglinear results, when visualized with a geographical information system, demonstrated wide spatial variations in educational attainment and concern for the environment. Nearly two-thirds of the respondents were not highly educated, and were therefore not highly concerned for the environment. The finding that both rural and urban male and female respondents in the 15-24 years age category, with 10-12 years of education, had the strongest interaction with personal concern for the environment could be beneficial for policy planners to utilize education as the primary instrument to enhance environmental governance and prospects for sustainable development.     

The utility of electrocardiography and echocardiography in copper deficiency-induced cardiac damage in goats

Environmental Science and Pollution Research - Copper deficiency (CuD) is a common mineral disorder in ruminants, which causes histomorphological changes in the heart due to disturbances in...     

Office Ergonomics: Deficiencies in Computer Workstation Design

The objective of this research was to study and identify ergonomic deficiencies in computer workstation design in typical offices. Physical measurements and a questionnaire were used to study 40 workstations. Major ergonomic deficiencies were found in physical design and layout of the workstations, employee postures, work practices, and training. The consequences in terms of user health and other problems were significant. Forty-five percent of the employees used nonadjustable chairs, 48% of computers faced windows, 90% of the employees used computers more than 4 hrs/day, 45% of the employees adopted bent and unsupported back postures, and 20% used office tables for computers. Major problems reported were eyestrain (58%), shoulder pain (45%), back pain (43%), arm pain (35%), wrist pain (30%), and neck pain (30%). These results indicated serious ergonomic deficiencies in office computer workstation design, layout, and usage. Strategies to reduce or eliminate ergonomic deficiencies in computer workstation design were suggested.