Adsorption of methylene blue from aqueous solution by chemically treated water hyacinth

Water hyacinth (WH), an aquatic plant macrophyte, was investigated for its ability to perform as a suitable adsorbent for methylene blue (MB) from aqueous solution. The non-living biomass of WH was subjected to several chemical treatments, namely, washing with hot water, washing with hot dilute HCl, soaking in NaOH, soaking in HNO₃, and sulfonation. The system variables studied also include pH and MB concentration. The Langmuir isotherm was found to represent the measured adsorption data well except for WH soaked in NaOH, which was found to be better represented by the Freundlich isotherm. Values of the dimensionless separation factor, K _R, indicated that the adsorption systems in this study are all favorable. Values of the first layer of adsorption were calculated by the non-linear multilayer adsorption model, and the specific surface area values were found to be high and comparable to commercially activated carbons.     

A comparison of pretreatment methods for bioethanol production from lignocellulosic materials

Lignocellulosic materials, which consist mainly of cellulose, hemicellulose and lignin, are among the most promising renewable feedstocks for the production of energy and chemicals. Bioethanol is a major biofuel that can be produced from lignocellulosic materials. Its production typically involves a hydrolysis-fermentation route, which has three main steps: pretreatment to get fermentable sugars, fermentation to produce bioethanol, and a separation process to obtain highly concentrated bioethanol. The pretreatment step has been recognized as a technological bottleneck for the cost-effective development of bioprocesses from lignocellulosic materials. In this work we analyze the potential of several pretreatment methods for bioethanol production from lignocellulosic materials. Simulations based on stoichiometric relations and yield data were conducted to evaluate the energy requirements of each pretreatment method. Other parameters were also considered such as the cost of chemicals, consumption of water, and constraints on the composition of inhibitors. Performance benchmarks were identifies using targeting techniques and these benchmarks were used to assess the actual performance of the alternatives. The combination of the evaluated parameters with target production values obtained from reported yields served as the basis for identifying the most promising pretreatment options and for defining areas of opportunities. This approach uses limited information, but it provides reliable results in order to reduce the number of pretreatment alternatives. The target production usage gives an estimation of the global process efficiency without the completed flowsheet defined.     

COVID-19 drugs in aquatic systems: a review

Environmental Chemistry Letters - The outbreak of the human coronavirus disease 2019 (COVID-19) has induced an unprecedented increase in the use of several old and repurposed therapeutic...     

Valorization of quartz powder for drying shrinkage and carbonation resistance of alkali-activated slag cement

Environmental Science and Pollution Research - Alkali-activated slag (AAS) cement is one type of alkali-activated binders free from Portland cement. The main problems of this type of cement are its...     

Analysis of sedimentation at the fishing harbor entrance: case study of El-Burullus,Egypt

Sedimentation in artificial ports and harbors is a common issue throughout the world. Based on an assessment of the coastal fishing harbors in Egypt, the El-Burullus fishing harbor has been found to suffer severely from siltation. Sediment deposits are concentrated at the harbor entrance, which threatens navigation through this area. Although the harbor authority has constructed a perpendicular extension on the main breakwater to mitigate these siltation issues, fishing boats are still suffering from the siltation at the harbor entrance. Dredging is required every year to maintain continuity of navigation through the harbor; the cost of dredging is a critical element which impacts the economic feasibility of the harbor. Therefore, the need to investigate new solutions for the siltation issue is critical. In this study, a two-dimensional calibrated and validated model using the Coastal Modeling System package is used to understand the coastal processes within the study area. It is also used to investigate the effects of the proposed breakwater extension on the siltation at the harbor outlet. Field data such as hydrographic surveys, waves, tides, and lake outlet discharge data were collected and included in the model. The results obtained for the current breakwater conditions confirmed the claims of the fishermen that the sedimentation problem still occurs at the entrance. Thus, five possible solutions to mitigate the problem were proposed and simulated considering the following parameters: sediment deposition rate to the west of the main breakwater, the erosion rate in front of the seawall in the eastern part of the harbor, and the morphological changes within the El-Burullus lake outlet. According to the simulation results, reducing the length of the upper edge of the middle jetty by 90 m improves the stability of the harbor entrance. Alternatively, replacing the perpendicular extension by an inclined extension of 60 m in length and shortening the middle jetty by 60 m reduces the accretion and erosion rates around the harbor which promotes the long-term stability for the coastal area in addition to favorable conditions to the El-Burullus harbor entrance.     

Chemical and bacterial quality monitoring of the Nile River water and associated health risks in Qena–Sohag sector,Egypt

The River Nile is the primary source of freshwater for drinking, irrigation, and industrial purposes in Egypt. Thus, the water quality in this river concerns the health of local inhabitants. The present study reveals seasonal variations of various physicochemical and heavy metals parameters and microbial load of water at 15 sites from Qena to Sohag cities, Egypt. The water is fresh with TDS?≤?270 and 410 mg L^?1 in summer and winter, respectively. Fe, Mn, Cd, Cr, Cu, Ni, and Zn concentrations were within drinking water specification in both seasons except Cr and Cd in summer. Viable numbers of total coliform, fecal coliform, and fecal streptococci were recorded in both seasons with fecal streptococci's disappearing in winter. The concentrations of salts and ions in winter were higher than summer due to decreased water quantity and flow rate in this season. On the other hand, heavy metals and bacteria were higher in summer owing to the rain and weathering of upstream rocks and increasing of human activities during the summer. The calculated water quality index (WQI) depicted that the chemical quality of water was poor for drinking and treatment, especially biological treatment, which is required before the water is supplied for drinking. Human health risk assessment factors such as probable daily intake, hazard quotient, and carcinogenic risk indicated high risks of Cr, Cd, and Ni for adults and children in both seasons. The non-carcinogenic and carcinogenic risks are mainly posed by Cr. The WQI values for the other water uses indicated the marginal quality for aquatic life, fair for irrigation, and fair in summer to good in winter for livestock consumption. The irrigation water quality parameters indicated that the water could be used to irrigate all soils and crops except the hazard of biological contamination. The water–rock interaction controls water chemistry besides the contribution of human activities. The agricultural, industrial, and municipal wastewaters were the main contributors to water pollution and should be treated before discharge into the Nile River. Source and drinking water should be monitored continuously to prevent related human waterborne diseases.

     

Uncertainty Analysis of Stage-Discharge Curves by Generalized Likelihood Uncertainty Estimation (GLUE) Method

Environmental Modeling & Assessment - Calibration of the rating curve is a challenge due to uncertainty in the parameters. This problem increases in an area with considerable seasonal...     

Appraisal of kinetin spraying strategy to alleviate the harmful effects of UVC stress on tomato plants

Environmental Science and Pollution Research - Increasing ultraviolet (UV) radiation is causing oxidative stress that accounts for growth and yield losses in the present era of climate change....     

Hydrogen production,storage, utilisation and environmental impacts: a review

Environmental Chemistry Letters - Dihydrogen (H2), commonly named ‘hydrogen’, is increasingly recognised as a clean and reliable energy vector for decarbonisation and defossilisation by...     

Hydrodynamic forces on emergent cylinders in non-uniform flow

Environmental Fluid Mechanics - The main objective of conducting numerical simulations of flows in rivers with vegetation is to investigate the complex flow dynamics involved in non-equilibrium...