Residue levels of organochlorine pesticides in some ecosystem components of Manzala Lake

To evaluate the organochlorine pesticide (OCP) contamination of Manzala Lake, its ecosystem was investigated during the winter season (December to March). The studied ecosystem components were water, sediment, aquatic weeds, and fishes in four locations. The samples were analyzed by gas chromatography with electron capture detector. Pollutant levels of total OCPs showed significantly high levels in the water areas of Round road (46.253 ng/ml), Port-Said Damietta road (19.301 ng/ml), followed by Bughas El-Rasoah (5.539 ng/ml), then Ashtoum El Gamel (natural reserve area now) (0.289 ng/ml). Organochlorines were detected in sediment only in Round road (3.359 μg/kg) and Port-Said Damietta road (0.171 μg/kg) by significant order while they were undetectable in Ashtoum El Gamel and Bughas El-Rasoah. Total OCPs in aquatic weeds ranged between 0.194 μg/kg in Port-Said Damietta and 0.026 μg/kg in Ashtoum El Gamel. While OCPs were 0.160 and 0.153 μg/kg in Round road and Bughas El-Rasoah, respectively. Concerning fish muscles OCPs were significantly higher in the Round road area (0.397 μg/kg) followed by the Port-Said Damietta road (0.258 μg/kg), and finally, Ashtoum El Gamel samples (0.126 μg/kg). The results revealed the direct relation for the accumulation of OCPs between studied ecosystem parameters at the Manzala Lake during the winter season. Results also demonstrated that fish samples collected from the Manzala Lake in the studied areas were contaminated with levels of organochlorines, not higher than the maximum permissible level recorded by FAO/WHO, and that the public is not at risk with fish consumption.     

COMPARATIVE STUDY OF FRESH-SALT WATER INTERFACES USING FINITE ELEMENT AND SIMPLE APPROACHES

ABSTRACT: The fresh-salt water interface in artesian aquifers has been investigated by various techniques on the basis of its analogy to the free surface in earth dams or cores of dams. Although various approximations are used, some more or less exact solutions exist. One of the simple methods, that would appeal to practical workers, was developed by the analysis of hydraulic forces. However, this method has not been checked thoroughly due to the lack of wide ranges of coverage by the more or less exact solutions. In this paper a suggested finite element method is used for the purpose of comparing with the method of hydraulic forces. The presented procedure eliminates some of the difficulties and uncertainties in current finite element procedures. Both methods proved to be in close agreement. Moreover, the hydraulic heads along the upper boundary of the artesian aquifer were found to be in close agreement with Dupuit's equation. The results of this investigation would greatly simplify the more complex management problems when the effects of discharge and/or recharge wells are added to the natural flow effects.     

Experimental study of the stack geometric parameters effect on the resonance frequency of a standing wave thermoacoustic refrigerator

Thermoacoustic refrigeration is an emerging technology that makes use of acoustic power to pump heat. The resonance frequency is important for the performance of thermoacoustic refrigerators, as it affects the temperature difference across the stack. This paper aims to optimize the performance of thermoacoustic refrigerators by experimentally investigating the effect of the stack geometric parameters (i.e. stack position, stack length, and the stack size) on the resonance frequency of a standing wave loudspeaker driven thermoacoustic refrigerator. Celcor Ceramic stacks of normalized positions of 0.764, 1.05, 1.43, and 1.72, normalized lengths of 0.076, 0.114, 0.153, and 0.191, and two porosities of 0.8 and 0.85 are used. The clarification of the relationship between the stack geometric parameters and the resonance frequency of the thermoacoustic refrigerator is presented. Moreover, the coefficient of performance of the thermoacoustic refrigerator is observed to increase at the resonance frequency of each stack configuration.     

GLOBAL WATER ISSUES AND THE WORLD WATER COUNCIL1

ABSTRACT: The key events and the process that led to the creation of the World Water Council on World Water Day 1996 are reviewed and its characteristics summarized. The development of this new organization is discussed in the context of the major global trends in water and water-related issues, viz. growing water scarcity with its links to limits on food production and demographic patterns. In response to the need to find solutions to these pressing water issues, the development of a Technical Program based on the deliberations of the founding member organizations and a number of short-term activities have been outlined to demonstrate the evolution of the Council in this first year of its existence. Given the importance of complementarity between the Council and the Global Water Partnership, an attempt has been made to articulate the mutually-reinforcing roles of the two organizations.     

Identifying municipal solid waste management opportunities in Al-Bayda City,Libya

In Libya, municipal solid waste management is one of the services provided by the authorities to keep the county clean. This study was conducted in the City of Al-Bayda, located in the eastern part of Libya, as there have been several major problems facing the city in dealing with solid waste management. One of these problems is the generation, collection, handling, transportation, recycling, and disposal of municipal solid waste (MSW). This study has identified that the ongoing disposal of MSW to poorly engineered “dump sites” on the outskirts of the city is unsustainable and will not meet the demands of the growing population and increasing urbanization currently experienced within Al-Bayda. Factors impacting the decision-making and operational processes of MSW include lack of resources and services that significantly affect the disposal of waste, an inadequate number of waste collection containers making the distance to these containers for many households excessive, and thus leading to an increasing likelihood of dumping solid waste in open areas and roadsides. The study recommends that the city government of Al-Bayda should identify synergies and increase partnership-working arrangements with the private sector to ensure efficient management of MSW within the city area.     

Assessment of heavy metal and organic contaminants levels along the Libyan coast using transplanted mussels (Mytilus galloprovincialis)

Within the framework of the MYTIOR project in 2009, heavy metals and organic compounds contaminations were assessed in transplanted mussels in 16 different stations along the coasts of Libya. These stations were located at miles offshore industrial/urban sources but in open sea providing original results related to the background contamination rather than linked to a specific coastal source of pollutants. Results indicated mercury (Hg, 0.045–0.066 mg/kg dry weight (dw)), lead (Pb, 0.44–0, 71 mg/kg dw) and copper (Cu, 3.56–4.21 mg/kg dw) were in the same range or at lower value than control for all stations. Chromium (Cr) in Meleta (3.08 mg/kg dw) and Bomba (3.80 mg/kg dw) and Cadmium values in all stations (1.21–2.41 mg/kg dw) were above control. Meleta, stations from the gulf of Syrt and the three eastern stations were the most affected stations by nickel (max at 5.83 mg/kg dw in Syrt) when zinc was in the same range (141–197 mg/kg dw) and above the control (92 mg/kg dw) at all stations. Polycyclic aromatic hydrocarbon (PAH) levels were found in the range of 16.8–42.8 mg/kg (dry weight) indicating low levels along the Libyan coast with acenaphthene and benzo (a, b, k) pyrenes detected mainly in western Libya. The study of PAH ratios indicated a mixed petrogenic/pyrolytic origin. The only polychlorinated biphenyls (PCBs) found in Libya were PCB 101 in one location and PCB 153 in Tripoli, Garrapoli, Syrt, Ras Lanuf and Benghazi (1.2–1.9 μg/kg dw). Insecticides were lower than control in all stations except DDT, only detected in Misratah (3.5 μg/kg dw). Overall, the results indicated a low background contamination and a low pollution extent according to the environmental pressure occurring offshore the Libyan coast.     

Coagulation of highly turbid suspensions using magnesium hydroxide: effects of slow mixing conditions

Laboratory experiments were carried out to study the effects of slow mixing conditions on magnesium hydroxide floc size and strength and to determine the turbidity and total suspended solid (TSS) removal efficiencies during coagulation of highly turbid suspensions. A highly turbid kaolin clay suspension (1,213?±?36 nephelometric turbidity units (NTU)) was alkalized to pH 10.5 using a 5 M NaOH solution; liquid bittern (LB) equivalent to 536 mg/L of Mg²⁺ was added as a coagulant, and the suspension was then subjected to previously optimized fast mixing conditions of 100 rpm and 60 s. Slow mixing speed (20, 30, 40, and 50 rpm) and time (10, 20, and 30 min) were then varied, while the temperature was maintained at 20.7?±?1 °C. The standard practice for coagulation-flocculation jar test ASTM D2035-13 (2013) was followed in all experiments. Relative floc size was monitored using an optical measuring device, photometric dispersion analyzer (PDA 2000). Larger and more shear resistant flocs were obtained at 20 rpm for both 20- and 30-min slow mixing times; however, given the shorter duration for the former, the 20-min slow mixing time was considered to be more energy efficient. For slow mixing camp number (Gt) values in the range of 8,400–90,000, it was found that the mixing speed affected floc size and strength more than the time. Higher-turbidity removal efficiencies were achieved at 20 and 30 rpm, while TSS removal efficiency was higher for the 50-rpm slow mixing speed. Extended slow mixing time of 30 min yielded better turbidity and TSS removal efficiencies at the slower speeds.     

3D-QSAR of fungal quorum-sensing inhibiting analogs of farnesol

Thirty-four analogs with variable antifungal activity were selected to develop models for establishing three-dimensional quantitative structure-activity relationships (3D-QSAR). Comparative molecular field analysis (CoMFA) and comparative similarity indices analyses (CoMSIA) were conducted on the group of analogs to determine the structural requirements for selectivity and potency in inhibiting biofilm formation and fungal growth. The best CoMFA model predicted a q² = 0.5 and an r² = 0.991, and revealed that electrostatic properties play a significant role in potency and selectivity. The best CoMSIA model combined electrostatics, hydrogen bond acceptor and donor, and hydrophobic fields with a q² = 0.664 r² = 0.952, S = 0.099, and F = 139.892. The analyses of the contour maps from both models provide significant insight into the structural necessities for a potent compound. Therefore, manipulating various chemical properties of the substituted groups on the farnesol chain can be used to enhance the fungicidal properties of the target compound.     

Three-dimensional quantitative structure activity relationships of quorum-sensing and biofilm inhibitors in gram-negative bacteria

Thirty N-acyl homoserine lactone (AHL) analogs with variable antibacterial activity and displaying inhibition of biofilm formation were selected to develop models for establishing three-dimensional quantitative structure-activity relationships (3D-QSAR). Comparative molecular field analysis (CoMFA) and comparative similarity indices analysis (CoMSIA) were carried out to determine the optimum structural requirements for selectivity and potency of quorum-sensing and bacterial biofilm inhibition. The best CoMFA model predicted a q² value of 0.519 and an r² value of 0.984 and revealed that electrostatic and steric properties play a significant role in potency and selectivity. The CoMSIA model predicted a q² value of 0.411 and an r² value of 0.938 based on a combination of steric, electrostatic, and hydrophobic effects. The analysis of the contour maps from each model provide insight into the structural requirements for increasing the activity of a compound. Consequently, manipulating the chemical and physical properties of substituted acyl groups on the homoserine lactone moiety can provide important information toward enhancing the antibacterial properties of the target chemical compound.     

Spatial and temporal projected distribution of four crop plants in Egypt

This study focuses on the management of the local agroecosystems in order to adapt planting or sowing practices for the projected climate change scenarios. It is projected that there will be increased air temperature throughout all four seasons in the coming 100 years, from the southern towards the northern parts of Egypt. The objective of this study is to investigate the influence of that increased air temperature on the spatial and temporal distribution of four of the major economic crops in Egypt. The study species are cotton (Gossypium barbadense L., cv. Giza 89), wheat (Triticum aestivum L., cv. Gemiza 9), rice (Oryza stiva L., cv. Sakha 101) and maize (Zea mays L., cv. Hybrid 10). Optimum air temperature allowing maximum growth for each of the study crop cultivars and the current and projected air temperature patterns in the future years were used for projection of the seasonal and crop distribution maps in the years 2005, 2025, 2050, 2075 and 2100. Results showed that sowing dates of a target crop may be managed in order to allow maximum predicted planting area in the same region. The current maximum area suitable for planting the Cotton crop in Egypt (104 thousand Fadden/year; one Fadden = 0.96 hectare or 0.42 acre) showed few variations over the coming hundred years. In this case, the sowing dates should be changed from the hotter months (February to April) to the cooler months (January to February). Alternatively, a great reduction in the area planted by Wheat crop was predicted in the coming 100 years. Despite the early planting, a reduction of about 147 thousand Fadden/year was projected by the year 2075. On the other hand, with earlier sowing dates, the maximum areas that are planted by Rice and Maize may not be greatly affected by the projected increase in air temperature.