Health risk estimation due to carbon monoxide pollution at different spatial levels in Santiago, Chile

The Metropolitan Region of Santiago has been declared as nonattainment area for carbon monoxide (CO). The data was based on seven air monitoring stations that do not necessarily represent the real population exposure. Usually, a series of coefficients that relates the concentration of pollutants with health effects (betas of the concentration–response equations) are used. For the calculation of these betas, normally, a city average air pollution concentration is used; nevertheless, these betas do not necessarily represent the real risk of exposure that the inhabitants are experimented. For this reason, this study estimates two aspects that are unknown and that are necessary to policymakers in public health decisions. First, estimate the exposure at a lower spatial resolution level and, second, estimate a concentration–response curve that differs spatially and depends on the proportion of susceptible groups. We followed the Air Pollution and Health, European Approach/Spanish Multicenter Study on the Relationship Between Air Pollution and the Mortality methodology for the determination of the short-term health effect due to CO population exposure at the three spatial levels (city, zone, and county). We found that there are different risks in cardiorespiratory mortality in the group over 64 years old associated to an unequal exposure to CO in Santiago city. The higher risks are in counties located to the south–east of the city. These finding confirm the necessity to face, in a different way, the approach when evaluating control strategies and policy decision to control air pollution in Santiago.     

Evaluating macroinvertebrate biological metrics for ecological assessment of streams in northern Portugal

A procedure to select the most relevant metrics for assessing the ecological condition of the Douro basin (north Portugal) was developed based upon a set of 184 benthic community metrics. They were grouped into 16 biological categories selected from literature using data collected over 2 years from 54 sites along 31 rivers covering the whole perceived range of human disturbance. Multivariate analyses were carried out to identify the main trends in the macroinvertebrate data, to select reference versus impaired sites, to avoid multicolinearity between metrics, and to identify those that were clearly independent from natural stream typology. Structural metrics, adaptation metrics, and tolerance measures most effectively responded across a range of human influence. We find these attributes to be ecologically sound for monitoring Portugal’s lotic ecosystems and providing information relevant to the Water Framework Directive, which asserts that the definition of water quality depends on its “ecological status”, independent of the actual or potential uses of those waters.     

Chemical characterization and factor analysis of PM2.5 in two sites of Monterrey, Mexico

The Monterrey Metropolitan Area (MMA) has shown a high concentration of PM2.5 in its atmosphere since 2003. The contribution of possible sources of primary PM2.5 and its precursors is not known. In this paper we present the results of analyzing the chemical composition of sixty 24-hr samples of PM2.5 to determine possible sources of PM2.5 in the MMA. The samples were collected at the northeast and southeast of the MMA between November 22 and December 12, 2007, using low-volume devices. Teflon and quartz filters were used to collect the samples. The concentrations of 16 airborne trace elements were determined using x-ray fluorescence (XRF). Anions and cations were determined using ion chromatography. Organic carbon (OC) and elemental carbon (EC) were determined by thermal optical analysis. The results show that Ca had the maximum mean concentration of all elements studied, followed by S. Enrichment factors above 50 were calculated for S, Cl, Cu, Zn, Br and Pb. This indicates that these elements may come from anthropogenic sources. Overall, the major average components of PM2.5 were OC (41.7%), SO4(2-) (22.9%), EC (7.4%), crustal material (11.4%), and NO3- (12.6%), which altogether accounted for 96% of the mass. Statistically, we did not find any difference in SO4(2-) concentrations between the two sites. The fraction of secondary organic carbon was between 24% and 34%. The results of the factor analysis performed over 10 metals and OC and EC show that there are three main sources of PM2.5: crustal material and vehicle exhaust; industrial activity; and fuel oil burning. The results show that SO4(2-), OC, and crustal material are important components of PM2.5 in MMA. Further work is necessary to evaluate the proportion of secondary inorganic and organic aerosol in order to have a better understanding of the sources and precursors of aerosols in the MMA.     

Calibration and validation of an integrated nitrate transport model within a well capture zone

Groundwater contamination by nitrate was investigated in an agricultural area in southern Quebec, Canada, where a municipal well is the local source of drinking water. A network of 38 piezometers was installed within the capture zone of the municipal well to monitor water table levels and nitrate concentrations in the aquifer. Nitrate concentrations were also measured in the municipal well. A Water flow and Nitrate transport Global Model (WNGM) was developed to simulate the impact of agricultural activities on nitrate concentrations in both the aquifer and municipal well. The WNGM first uses the Agriflux model to simulate vertical water and nitrate fluxes below the root zone for each of the seventy agricultural fields located within the capture zone of the municipal well. The WNGM then uses the HydroGeoSphere model to simulate three-dimensional variably-saturated groundwater flow and nitrate transport in the aquifer using water and nitrate fluxes computed with the Agriflux model as the top boundary conditions. The WNGM model was calibrated by reproducing water levels measured from 2005 to 2007 in the network of piezometers and nitrate concentrations measured in the municipal well from 1997 to 2007. The nitrate concentrations measured in the network of piezometers, however, showed greater variability than in the municipal well and could not be reproduced by the calibrated model. After calibration, the model was validated by successfully reproducing the decrease of nitrate concentrations observed in the municipal well in 2006 and 2007. Although it cannot predict nitrate concentrations in individual piezometers, the calibrated and validated WNGM can be used to assess the impact of changes in agricultural practices on global nitrate concentrations in the aquifer and in the municipal well.     

Influence of soluble copper on the electrokinetic properties and transport of copper oxychloride-based fungicide particles

This article describes the influence of dissolved copper on the electrokinetic properties and transport of a copper oxychloride-based fungicide (COF) in porous media. The Zeta potential (ζ) of COF particles increases (viz. becomes less negative) with increasing concentration of Cu(2+) in the bulk solution. ζ decreases for COF when the electrolyte (NaNO(3)) concentration is raised from 1 to 10mM. This can be ascribed to ion correlation of Cu(2+) in the electrical double layer (EDL). COF transport tests in quartz sand columns showed the addition of Cu(2+) to the bulk solution to result in increased retention of the metal. Modelling particle deposition dynamics provided results consistent with kinetic attachment. Based on the effect of soluble Cu on colloid mobility, the transport of particulate and soluble forms of copper is coupled via the chemistry of pore water and colloid interactions. Mutual effects between cations and colloids should thus be considered when determining the environmental fate of particulate and soluble forms of copper in soil and groundwater (especially at copper-contaminated sites).     

Semifield assessment of the runoff potential and environmental risk of the parasiticide drug ivermectin under Mediterranean conditions

Introduction  

The antiparasitic ivermectin is of particular concern to regulatory agencies. Ivermectin can reach the environment through the direct emission of dung from livestock on pasture and via manure application on agricultural lands.     

Effects of municipal solid waste compost and mineral fertilizer amendments on soil properties and heavy metals distribution in maize plants (Zea mays L.)

Soil amendments based on crop nutrient requirements are considered a beneficial management practice. A greenhouse experiment with maize seeds (Zea mays L.) was conducted to assess the inputs of metals to agricultural land from soil amendments. Maize seeds were exposed to a municipal solid waste (MSW) compost (50 Mg ha⁻¹) and NPK fertilizer (33 g plant⁻¹) amendments considering N plant requirement until the harvesting stage with the following objectives: (1) determine the accumulation of total and available metals in soil and (2) know the uptake and ability of translocation of metals from roots to different plant parts, and their effect on biomass production. The results showed that MSW compost increased Cu, Pb and Zn in soil, while NPK fertilizer increased Cd and Ni, but decreased Hg concentration in soil. The root system acted as a barrier for Cr, Ni, Pb and Hg, so metal uptake and translocation were lower in aerial plant parts. Biomass production was significantly enhanced in both MSW and NPK fertilizer-amended soils (17%), but also provoked slight increases of metals and their bioavailability in soil. The highest metal concentrations were observed in roots, but there were no significant differences between plants growing in amended soil and the control soil. Important differences were found for aerial plant parts as regards metal accumulation, whereas metal levels in grains were negligible in all the treatments.     

Influence of RFID tags on recyclability of plastic packaging

The use of Radio Frequency IDentification Technology (RFID) in the packaging sector is an important logistical improvement regarding the advantages offered by this technology in comparison with barcodes. Nevertheless, the presence of these devices in plastic packaging, and consequently in plastic waste, can cause several problems in the recycling plants due to the materials included in these devices.In this study, the mentioned recycling constraints have been experimentally identified in a pilot scale recycling study consisting in three recycling tests with an increasing presence of RFID tags. Differences in each test were evaluated. Furthermore, the quality of the recycled material of each test was studied through the injection and testing of tests probes.The results of the pilot scale recycling tests did not show a decrease in the quality of the recycled plastic due to the presence of RFID tags. Nevertheless, several operational problems during the recycling process were observed such as the obstruction of the screens, which lessened the process yield and created process interruptions, as well as the loss of extruded plastic during the process.These recycling constraints cannot be directly extrapolated to the industrial plants due to the different working scales. Nevertheless, technological solutions are proposed in order to avoid these recycling constraints if they appear.     

Phosphorus effect on Zn adsorption-desorption kinetics in acid soils

The adsorption-desorption kinetics of Zn in the absence and presence of P was studied by using the stirred flow chamber technique. The results thus obtained were compared with those previously obtained for Cu. As with copper, the simultaneous addition of P and Zn in a 1:1 mole ratio to soil was found to significantly increased Zn adsorption relative to the absence of P. Unlike Cu, however, Zn was only adsorbed at fast adsorption sites in the absence of P. In any case, the increased adsorption of Zn in the presence of P was largely due to slow adsorption sites, where Zn²⁺ ion acted as a bridging element between P and organic matter. Following adsorption in both the presence and absence of P, Zn was desorbed to a much higher extent than was Cu. However, the proportion of Zn desorbed after adsorption in the presence of P was significantly lower than in the absence of P. This indicates that Zn binds more strongly to adsorbing surfaces in the presence of P than in its absence.