Green fuel production: processes applied to microalgae

The continuous increase in world energy demand will lead to an energy crisis due to the limited availability of fossil fuels. Furthermore, the use of this energetic resource is responsible for the accumulation of greenhouse gases in atmosphere that is associated with several negative effects on environment. Therefore, it is worth to search for different energy supplies that are renewable and environmentally friendly—carbon neutral fuel. Microalgae are photosynthetic microorganisms that can achieve high oil contents. This oil is suitable for producing biodiesel; thus, microalgae are considered a promising sustainable energetic resource that can reduce the dependence on fossil fuel. Biodiesel production from microalgae includes several steps, such as cell cultivation and harvesting, oil extraction and biodiesel synthesis. Although several attempts have been made to improve biodiesel yields from microalgae, further studies are required to improve biodiesel production rates and to reduce the associated costs. This review shows the recent developments on biodiesel production from microalgae, emphasizing two process concepts: (1) indirect route, in which, after a facultative cell wall disruption method, microalgal oil is recovered in an appropriate solvent and then converted into biodiesel through transesterification and (2) direct route, in which biodiesel is produced directly from the harvested biomass. High biodiesel yields are obtained when both routes are preceded by a cell wall disruption method. In the indirect route, it is possible to apply three different types of solvents to recover microalgal oil. Although there are several concerns about the application of organic solvents, the most promising and cost-effective alternative for lipid recovery is n-hexane. Comparing direct and indirect routes, this study demonstrates that although further studies are required to optimize biodiesel production from microalgae, the available information proposes that the direct route is the most efficient.     

Occupational accident rate in olive oil mills

Problem

This paper aims at examining the occupational accident rate in Spain in the olive oil mill industry. These mills produce olive oil by physical or mechanical, but not chemical procedures. Although Spain is the leading olive oil producer in the world with 1,200,000 tons/year and over 25% of the world olive farming area, the occupational accident rate in this sector has been little studied in the relevant scientific literature.

Method

Our study analyses all occupational accidents which occurred during 2004-2009, with or without sick leave, at 90 Andalusian olive oil mills covered by one of the biggest state insurance companies for accidents at work and occupational diseases (within the Spanish Social Security system).

Results and discussion

Slips or trips are the most frequent cause of occupational accidents in this sector, accounting for 14.86% of the cases. In second position, incorrectly coordinated bodily movements account for almost 13.51% of the accidents. Falls from height, 12.2% of the cases, are also statistically noteworthy. As for the seriousness of the injuries, entrapments are particularly important, since in 2.70% of the cases they result in the traumatic amputation of a part of the body. The analysis of accidents without sick leave reveals that a high number of incidents are caused by contact of the skin and eyes with hazardous substances (20% of the cases) and 10% of them involve superficial injuries.

Impact on the industry

This paper provides a clear and updated image of the accident rate in Spanish olive oil mills and can be a useful tool for the design and adequate adjustment of the management systems implemented in these plants to guarantee a satisfactory level of occupational health and safety by means of more efficient planning and monitoring of measures intended to reduce professional risks and improve working conditions.

Recommendations

Given not only the high incidence of falls on the same level and the potential seriousness of falls from different levels, but also the small, round fruit involved, with a high oil content and a hard round stone, it is extremely important to design and implement safe working procedures and specifically train both operatives and managers in charge of the tidiness, cleanliness and regular control of the premises and operations. The analysis of the accidents not requiring sick leave (mostly cases of contact with hazardous substances on the skin or eyes, or superficial injuries) clearly reveals that the use of suitable personal protective equipment and the relevant training are crucial issues.     

The proton binding properties of biosorbents

Environmental Chemistry Letters - A broad variety of materials of biological origin have been successfully used in recent decades for the removal of pollutants from waters. These biosorbents...     

A roadmap for the conservation of freshwater mussels in Europe

Europe has a long history of human pressure on freshwater ecosystems. As pressure continues to grow and new threats emerge, there is an urgent need for conservation of freshwater biodiversity and its ecosystem services. However, whilst some taxonomic groups, mainly vertebrates, have received a disproportionate amount of attention and funds, other groups remain largely off the public and scientific radar. Freshwater mussels (Bivalvia, Unionida) are an alarming example of this conservation bias and here we point out six conceptual areas that need immediate and long-term attention: knowledge, threats, socioeconomics, conservation, governance and education. The proposed roadmap aims to advance research, policy and education by identifying the most pressing priorities for the short- and long-term conservation of freshwater mussels across Europe.     

Straining phenomena in bacteria transport through natural porous media

Background, aim, and scope  

Transport of bacteria through natural porous media is an issue of increasing concern arising in several very important environmental processes. These include the percolation of bacteria from fecal waste to drinking water reservoirs, thus leading to a risk for human health, or the bioremediation of contaminated soils in which the bacteria are expected to travel long distances underground in order to reach contaminated areas and degrade chemicals originating from accidental spills. An understanding of bacterial retention and transport mechanisms in porous media would be of great help in the development of models able to predict the distance covered by bacterial suspensions in these situations.     

On the possibility of sustainable development with less economic growth: a research note

The main purpose of this paper is to discuss whether it is possible to achieve human development without or with less economic growth. For this to happen, it is important that developed countries can maintain high levels of human development while reducing the scale of production and consumption so that developing countries can achieve greater economic growth. Using panel data from 118 countries aggregated in ten blocks of countries, we assess the influence of “growth” on “development”, as proxied by a transformed variable “Social Human Development Index” (SHDI), controlling for the influence of geo-economic factors. In particular, we analyse whether developed countries present a weaker statistical relation between GDP and the social dimension of HDI than their less developed counterparts. Results reveal that the GDP elasticity of SHDI is higher in blocks of countries where the concentration of developing countries occurs than in blocks dominated by the presence of developed countries. Thus, it is possible to envisage that a slowdown in economic activity in developed countries may occur without great sacrifice of human development, at least when it is measured by health and education components. We interpret the findings as meaning that at an aggregate level there are conditions for development to occur without or with less growth.     

Calibration and validation of an integrated nitrate transport model within a well capture zone

Groundwater contamination by nitrate was investigated in an agricultural area in southern Quebec, Canada, where a municipal well is the local source of drinking water. A network of 38 piezometers was installed within the capture zone of the municipal well to monitor water table levels and nitrate concentrations in the aquifer. Nitrate concentrations were also measured in the municipal well. A Water flow and Nitrate transport Global Model (WNGM) was developed to simulate the impact of agricultural activities on nitrate concentrations in both the aquifer and municipal well. The WNGM first uses the Agriflux model to simulate vertical water and nitrate fluxes below the root zone for each of the seventy agricultural fields located within the capture zone of the municipal well. The WNGM then uses the HydroGeoSphere model to simulate three-dimensional variably-saturated groundwater flow and nitrate transport in the aquifer using water and nitrate fluxes computed with the Agriflux model as the top boundary conditions. The WNGM model was calibrated by reproducing water levels measured from 2005 to 2007 in the network of piezometers and nitrate concentrations measured in the municipal well from 1997 to 2007. The nitrate concentrations measured in the network of piezometers, however, showed greater variability than in the municipal well and could not be reproduced by the calibrated model. After calibration, the model was validated by successfully reproducing the decrease of nitrate concentrations observed in the municipal well in 2006 and 2007. Although it cannot predict nitrate concentrations in individual piezometers, the calibrated and validated WNGM can be used to assess the impact of changes in agricultural practices on global nitrate concentrations in the aquifer and in the municipal well.     

Impact of Demographic Trends on Future Development Patterns and the Loss of Open Space in the California Mojave Desert

During the post-World War II era, the Mojave Desert Region of San Bernardino County, California, has experienced rapid levels of population growth. Over the past several decades, growth has accelerated, accompanied by significant shifts in ethnic composition, most notably from predominantly White non-Hispanic to Hispanic. This study explores the impacts of changing ethnicity on future development and the loss of open space by modeling ethnic propensities regarding family size and settlement preferences reflected by U.S. Census Bureau data. Demographic trends and land conversion data were obtained for seven Mojave Desert communities for the period between 1990 and 2001. Using a spatially explicit, logistic regression-based urban growth model, these data and trends were used to project community-specific future growth patterns from 2000 to 2020 under three future settlement scenarios: (1) an “historic” scenario reported in earlier research that uses a Mojave-wide average settlement density of 3.76 persons/ha; (2) an “existing” scenario based on community-specific settlement densities as of 2001; and (3) a “demographic futures” scenario based on community-specific settlement densities that explicitly model the Region’s changing ethnicity. Results found that under the demographic futures scenario, by 2020 roughly 53% of within-community open space would remain, under the existing scenario only 40% would remain, and under the historic scenario model the communities would have what amounts to a deficit of open space. Differences in the loss of open space across the scenarios demonstrate the importance of considering demographic trends that are reflective of the residential needs and preferences of projected future populations.     

Response of Holm oak (Quercus ilex subsp. ballota) and mastic shrub (Pistacia lentiscus L.) seedlings to high concentrations of Cd and Tl in the rhizosphere

The impairment of root growth and photosynthetical functioning are the main impacts of trace elements on woody plant seedlings. In this work, we assessed the response of Holm oak (Quercusilex subsp. ballota) and mastic shrub (Pistacia lentiscus) seedlings to high concentrations of Cd and Tl in the rhizosphere. These are non-essential trace elements, with a potential high mobility in the soil-plant system. Seedlings of these species are frequently used in the afforestation of degraded soils in mining areas. Plants were exposed to different levels of Cd (20, 80 and 200 mg L⁻¹) and Tl (2, 10 and 20 mg L⁻¹) in a sand culture. Biomass allocation, growth rates, chlorophyll fluorescence and gas exchange were studied. Both metals affected root biomass. Cadmium produced an increase in the root mass ratio and a decrease in the specific leaf area of the plants in oak seedlings, while Tl did not provoke such response. Mastic plants were more sensitive to Tl and Cd than oak plants. Between elements, Tl provoked more severe toxic effects in the plants, affecting the antennae complexes and reaction centers of the photosystem II. Both elements decreased net assimilation rates (down to a 20% of the control plants) and stomatal conductance (5-10% of the values for the control plants). Cadmium was highly retained in the roots of both species, while Tl was highly translocated into the leaves. In general, Holm oak showed a higher tolerance for Cd than for Tl, and a higher resistance to both metals than mastic shrub, due to a high capacity for Cd retention at the root level. However, such accumulation in roots may induce water stress in the seedling exposed to Cd.     

Effects of municipal solid waste compost and mineral fertilizer amendments on soil properties and heavy metals distribution in maize plants (Zea mays L.)

Soil amendments based on crop nutrient requirements are considered a beneficial management practice. A greenhouse experiment with maize seeds (Zea mays L.) was conducted to assess the inputs of metals to agricultural land from soil amendments. Maize seeds were exposed to a municipal solid waste (MSW) compost (50 Mg ha⁻¹) and NPK fertilizer (33 g plant⁻¹) amendments considering N plant requirement until the harvesting stage with the following objectives: (1) determine the accumulation of total and available metals in soil and (2) know the uptake and ability of translocation of metals from roots to different plant parts, and their effect on biomass production. The results showed that MSW compost increased Cu, Pb and Zn in soil, while NPK fertilizer increased Cd and Ni, but decreased Hg concentration in soil. The root system acted as a barrier for Cr, Ni, Pb and Hg, so metal uptake and translocation were lower in aerial plant parts. Biomass production was significantly enhanced in both MSW and NPK fertilizer-amended soils (17%), but also provoked slight increases of metals and their bioavailability in soil. The highest metal concentrations were observed in roots, but there were no significant differences between plants growing in amended soil and the control soil. Important differences were found for aerial plant parts as regards metal accumulation, whereas metal levels in grains were negligible in all the treatments.