A chemometric approach to the evaluation of atmospheric and fluvial pollutant inputs in aquatic systems: the Guadalquivir River estuary as a case study

To establish the quality of waters it is necessary to identify both point and non-point pollution sources. In this work, we propose the combination of clean analytical methodologies and chemometric tools to study discrete and diffuse pollution caused in a river by tributaries and precipitations, respectively.During a two-year period, water samples were taken in the Guadalquivir river (selected as a case study) and its main tributaries before and after precipitations. Samples were characterized by analysing nutrients, pH, dissolved oxygen, total and volatile suspended solids, carbon species, and heavy metals. Results were used to estimate fluvial and atmospheric inputs and as tracers for anthropic activities.Multivariate analysis was used to estimate the background pollution, and to identify pollution inputs. Principal Component Analysis and Cluster Analysis were used as data exploratory tools, while box-whiskers plots and Linear Discriminant Analysis were used to analyse and distinguish the different types of water samples.     

Strontium migration in a crystalline medium: effects of the presence of bentonite colloids

The effects of bentonite colloids on strontium migration in fractured crystalline medium were investigated. We analyzed first the transport behaviour of bentonite colloids alone at different flow rates; then we compared the transport behaviour of strontium as solute and of strontium previously adsorbed onto stable bentonite colloids at a water velocity of approximately 7.1·10(-6)m/s-224m/yr. Experiments with bentonite colloids alone showed that - at the lowest water flow rate used in our experiments (7.1·10(-6)m/s) - approximately 70% of the initially injected colloids were retained in the fracture. Nevertheless, the mobile colloidal fraction, moved through the fracture without retardation, at any flow rate. Bentonite colloids deposited over the fracture surface were identified during post-mortem analyses. The breakthrough curve of strontium as a solute, presented a retardation factor, R(f)~6, in agreement with its sorption onto the granite fracture surface. The breakthrough curve of strontium in the presence of bentonite colloids was much more complex, suggesting additional contributions of colloids to strontium transport. A very small fraction of strontium adsorbed on mobile colloids moved un-retarded (R(f)=1) and this fraction was much lower than the expected, considering the quantity of strontium initially adsorbed onto colloids (90%). This behaviour suggests the hypothesis of strontium sorption reversibility from colloids. On the other hand, bentonite colloids retained within the granite fracture played a major role, contributing to a slower strontium transport in comparison with strontium as a solute. This was shown by a clear peak in the breakthrough curve corresponding to a retardation factor of approximately 20.     

Competitive sorption of cis-DCE and TCE in silica gel as a model porous mineral solid

The competitive sorption of 1,2-cis-dichloroethene (cis-DCE) and trichloroethene (TCE) was investigated by means of column experiments using a model porous mineral solid represented by silica gel. The experimental isotherms were obtained by employing a chromatographic method. The competitive sorption isotherms were modelled with the extended Freundlich and extended Langmuir isotherms, using the parameters from single-solute experiments. The breakthrough curves were modelled with the advection-dispersion transport equation coupled with the lumped pore diffusion model. The best results were obtained when the extended Freundlich isotherm was employed. The competitive sorption was revealed with the presence of an overshoot in the breakthrough curve of cis-DCE and a decrease in the degree of sorption of cis-DCE (20%) and TCE (12%). A linear dependency of the overshoot with an increase in the concentration of cis-DCE at a fixed concentration of TCE was observed, between 16% and 20%, and at least at concentrations <6 mg L(-1) in the liquid phase. The displaced molecules of cis-DCE by TCE were accumulated through the column causing its overshoot; thus short columns may hinder its observation. Thermodynamic analysis shows an exothermic adsorption process of -34 to -41 kJ mol(-1), which is enhanced by sorption in micropores. The Gibbs free energy is positive for cis-DCE in the multi-component case, due to its displacement by TCE.     

Modes of Variability of Annual and Seasonal Rainfall in Mexico

The aim of this study is to identify temporal and spatial variability patterns of annual and seasonal rainfall in Mexico. A set of 769 weather stations located in Mexico was examined. The country was divided into 12 homogeneous rainfall regions via principal component analysis. A Pettitt test was conducted to perform a homogeneity analysis for detecting abrupt changes in mean rainfall levels, and a Mann‐Kendall test was conducted to examine the presence of monotonically increasing/decreasing patterns in the data. In total, 14.4% of the annual series was deemed nonstationary. Fourteen percent of the samples were nonstationary in the winter and summer, and 9% were nonstationary in the spring and autumn. According to the results, the nonstationarity of some seasonal rainfall series may be associated with the presence of atmospheric phenomena (e.g., El Niño/Southern Oscillation, Pacific Decadal Oscillation, Atlantic Multidecadal Oscillation, and North Atlantic Oscillation). A rainfall frequency analysis was performed for the nonstationary annual series, and significant differences in the return levels can be expected for the scenarios analyzed. The identification of areas that are more susceptible to changes in rainfall levels will improve water resource management plans in the country, and it is expected that these plans will take into account nonstationary theory.     

Fate of Terpene Compounds in Activated Sludge Wastewater Treatment Systems

ABSTRACT

Terpene-based cleaners are being widely used in industrial cleaning formulations because of their ability to replace suspected ozone-depleting chemicals such as 1,1,1-trichloroethane and 1,1,2-trichloro-1,2,2-trifluoroethane (CFC-113). Substitution of chlorinated solvents with ter-pene-based cleaners, however, is expected to result in increased discharges to wastewater from industrial operations. A pilot-scale study was conducted at the U.S. Environmental Protection Agency's (EPA) Test & Evaluation Facility in Cincinnati, OH, to quantify the fate of specific terpene compounds in the activated sludge wastewater treatment process. Biodegradation rates of terpenes were estimated from the difference between the influent terpene mass flow rates and the amounts volatilized to air, partitioned to waste sludge, and passed through the treatment process unchanged. Any chemical transformation of the terpene compounds studied was attributed to biodegradation.

Analytical methods were developed to determine ter-pene concentrations in aqueous and gaseous media. The fate of two common terpene compounds (d-limonene and terpinolene) were evaluated in three identical pilot-scale systems: (1) a system with a high target spike range (2–10 mg/L), (2) a system with a low target spike range (0.5–2 mg/L), and (3) a control system (no spike).

The study showed that the primary removal mechanism for the terpene compounds in the activated sludge process is biodegradation. Typically, greater than 90% of the mass of terpenes entering the aeration basin of the activated sludge process biodegrades to other compounds; volatilization from the reaction basin accounts for less than 10%, while loss to waste activated sludge and the secondary clarifier effluent accounts for less than 1%.     

Solar CPC pilot plant photocatalytic degradation of bisphenol A in waters and wastewaters using suspended and supported-TiO2. Influence of photogenerated species

Photocatalytic degradation of bisphenol A (BPA) in waters and wastewaters in the presence of titanium dioxide (TiO₂) was performed under different conditions. Suspensions of the TiO₂ were used to compare the degradation efficiency of BPA (20 mg L^?1) in batch and compound parabolic collector (CPC) reactors. A TiO₂ catalyst supported on glass spheres was prepared (sol–gel method) and used in a CPC solar pilot plant for the photodegradation of BPA (100 μg L^?1). The influence of OH·, O₂ ^·?, and h ⁺ on the BPA degradation were evaluated. The radicals OH· and O₂ ^·? were proved to be the main species involved on BPA photodegradation. Total organic carbon (TOC) and carboxylic acids were determined to evaluate the BPA mineralization during the photodegradation process. Some toxicological effects of BPA and its photoproducts on Eisenia andrei earthworms were evaluated. The results show that the optimal concentration of suspended TiO₂ to degrade BPA in batch or CPC reactors was 0.1 g L^?1. According to biological tests, the BPA LC₅₀ in 24 h for E. andrei was of 1.7?×?10^?2 mg cm^?2. The photocatalytic degradation of BPA mediated by TiO₂ supported on glass spheres suffered strong influence of the water matrix. On real municipal wastewater treatment plant (MWWTP) secondary effluent, 30 % of BPA remains in solution; nevertheless, the method has the enormous advantage since it eliminates the need of catalyst removal step, reducing the cost of treatment.     

Influence of different abiotic and biotic factors on the metalaxyl and carbofuran dissipation

Metalaxyl and carbofuran dissipation was studied in response to different factors (soil bacterial communities, light irradiation, presence of an inorganic culture medium and presence of soil) and combinations of these factors in short-term experiments (48 h). The soil microbial communities have no effect on metalaxyl or carbofuran dissipation in the time scale employed. Light irradiation and soil promote metalaxyl and carbofuran dissipation by photodegradation and adsorption, respectively. However, photodegradation has a stronger effect on metalaxyl and carbofuran dissipation than the adsorption of the pesticides in the soil. The addition of the culture medium have no direct effect on pesticide dissipation, degradation by microbial communities or adsorption but its presence greatly increased photodegradation.     

Kinetic studies of endosulfan photochemical degradations by ultraviolet light irradiation in aqueous medium

Kinetic studies of endosulfan photochemical degradation in controlled aqueous systems were carried out by ultraviolet light irradiation at λ = 254 nm. The photolysis of (α + β: 2 + 1) endosulfan, α-endosulfan and β-endosulfan were first-order kinetics. The observed rate constants obtained from linear least-squares analysis of the data were 1 × 10^?4 s^?1; 1 × 10^?4 s^?1; and 2 × 10^?5 s^?1, respectively, and the calculated quantum yields (φ) were 1, 1 and 1.6, respectively. Preliminary differential pulse polarographic (DPP) analysis allowed to observe the possible endosulfan photochemical degradation pathway. This degradation route involves the formation of the endosulfan diol, its transformation to endosulfan ether and finally the ether's complete degradation by observing the potential shifts.     

Effect of Fe (III) on acid degradation of methylparathion

A study was undertaken to determine the transformation kinetic of methylparathion (O, O, -dimethyl O-4 nitrophenylphosphorotioate) in the presence of Fe(III) between pH 2 and 7. The Fe(III) was not electroactive under the conditions used in this study, and polarographic signals were exhibited by methylparathion and main degradation product only. Data suggest that hydrolysis of methylparathion in an acid medium is catalyzed by Fe(III) and the pesticide did not degrade in this medium without this cation. Methylparathion degradation was observed at all the pHs studied and was independent of the predominant chemical form of Fe(III) in the aqueous medium. The reaction was first-order with pH-dependent rate constant (k) values ranging from 3.3 × 10^{? 3} h^{? 1} to 7.0 × 10^{? 3} h^{? 1}. The k values increased as pH decreased, suggesting that Fe(III) acted as an electrophile in the reaction mechanism.     

Comparison of batch, stirred flow chamber, and column experiments to study adsorption, desorption and transport of carbofuran within two acidic soils

Different methods (batch, column and stirred flow chamber experiments) used for adsorption and desorption of carbofuran studies were compared. All tested methods showed that the carbofuran adsorption was higher in the soil with the higher organic matter content, whereas the opposite behaviour was observed for the percentage of carbofuran desorbed. However, different methods have revealed some discrepancies in carbofuran adsorption/desorption kinetics. Although batch method showed interesting data on equilibrium experiments, such as a low heterogeneity for the carbofuran adsorption sites independent of soil organic matter content, it had some disadvantages for carbofuran adsorption/desorption kinetic studies. The disadvantages were related with the excessive limitations of this method on kinetics, i.e., no difference could be detected between different soils. However, with column and stirred flow chamber methods the carbofuran adsorption/desorption kinetics of different soils could be compared. Moreover, the absolute values of carbofuran adsorption/desorption and its rate were higher in the stirred flow chamber than in the batch and column experiments. Using stirred flow chamber experiments the carbofuran desorption was significantly faster than its adsorption, whereas carbofuran using column experiments they were similar. These discrepancies should be considered when the results obtained only with one method is discussed.