Sediment grain size estimation using airborne remote sensing, field sampling, and robust statistic

Remote sensing has been used since the 1980s to study parameters in relation with coastal zones. It was not until the beginning of the twenty-first century that it started to acquire imagery with good temporal and spectral resolution. This has encouraged the development of reliable imagery acquisition systems that consider remote sensing as a water management tool. Nevertheless, the spatial resolution that it provides is not adapted to carry out coastal studies. This article introduces a new methodology for estimating the most fundamental physical property of intertidal sediment, the grain size, in coastal zones. The study combines hyperspectral information (CASI-2 flight), robust statistic, and simultaneous field work (chemical and radiometric sampling), performed over Santander Bay, Spain. Field data acquisition was used to build a spectral library in order to study different atmospheric correction algorithms for CASI-2 data and to develop algorithms to estimate grain size in an estuary. Two robust estimation techniques (MVE and MCD multivariate M-estimators of location and scale) were applied to CASI-2 imagery, and the results showed that robust adjustments give acceptable and meaningful algorithms. These adjustments have given the following R(2) estimated results: 0.93 in the case of sandy loam contribution, 0.94 for the silty loam, and 0.67 for clay loam. The robust statistic is a powerful tool for large dataset.     

Air quality monitoring system using lichens as bioindicators in Central Argentina

Air quality studies with bioindicators have not been well developed in South America. In the city of Córdoba, there are not permanent air pollutant measurements by equipment. In order to develop an air quality biomonitoring system using lichens, we applied a systematic sampling in the city of Córdoba, Argentina. A total of 341 plots were sampled in the area of the city which is a square of 24 × 24 km. In each sample plot we selected three phorophytes and estimated the frequency and cover of lichen species growing at 1.5 m on trunks. We also calculated the Index of Atmospheric Purity (IAP) using lichen frequencies. Maps with number of lichen species, cover values, and IAP were performed. The lichen community was described with nine species where Physcia undulata and Physcia endochryscea were the most frequent. Moreover, these two species were dominant in the community with the highest cover index. The central area of the city is considered a lichen desert with poor air quality. The southeast and northwest areas of the city showed the highest IAP values and number of species. In general, the city shows fair air quality and few areas with good and very good air quality.     

Multi-level modelling of chlorination by-product presence in drinking water distribution systems for human exposure assessment purposes

During drinking water treatment and distribution, chlorine reacts with organic matter occurring in water to form various chlorination by-products (CBPs) such as trihalomethanes (THMs) and haloacetic acids (HAAs). This paper presents the occurrence of THMs and HAAs in different water distribution systems (DS) of the same region and their modelling for exposure assessment purposes. This study was conducted in eight DS supplying chlorinated water to the population of Québec City, Canada. These systems differ in type of water source (i.e. surface, ground or mixed water), in treatment applied at the plant, and in size and structure of the DS. Two spatio-temporal databases for THMs and HAAs were implemented, one for model development and the other for model validation. The analysis of the data demonstrates significant seasonal and spatial variations of these compounds. A multi-level statistical modelling approach was applied to estimate the ranges for occurrence of THMs and HAAs in the eight DS (i.e. a single model for the study region for each CBP species). The modelling approach integrates available or easily measurable parameters. For both THMs and HAAs, a two-level model considering a sampling-site random effect was selected among various models initially developed. The model capacity for estimating the presence of THMs and HAAs in drinking water and its usefulness for exposure assessment purposes in the studied region was demonstrated.     

Enhanced Cu(II) adsorption using sodium trimetaphosphate–modified cellulose beads: equilibrium,kinetics, adsorption mechanisms,and reusability

Environmental Science and Pollution Research - The current study is focused on the simple synthesis of two novel biosorbent beads: BASB/STMP and CNFB/STMP, derived respectively from bleached almond...     

Phytotoxicity,cytotoxicity, and in vivo antifungal efficacy of chitosan nanobiocomposites on prokaryotic and eukaryotic cells

Environmental Science and Pollution Research - Chitosan (CS) nanosystems have potential applications for the control of microorganisms in the medical, environmental, and agrifood fields. In vivo...     

Nitro-PAH exposures of occupationally-exposed traffic workers and associated urinary 1-nitropyrene metabolite concentrations

The assessment of occupational exposure to diesel exhaust(DE) is important from an epidemiological perspective. Urinary biomarkers of exposure have been proposed as a novel approach for measuring exposure to DE. In this study, we measured the concentrations of two urinary metabolites of 1-nitropyrene(1NP), a nitrated polycyclic aromatic hydrocarbon that has been suggested as a molecular marker of diesel particulate matter. These two metabolites, 6-hydroxy-1-nitropyrene and 8-hydroxy-1-nitropyrene, were determined in urine samples(10 m L) from a small group of workers who were occupationally-exposed to vehicle exhaust in Trujillo, Peru, before and after their workshifts. Workshift exposures to1 NP, as well as PM_(2.5), 2-nitropyrene and 2-nitrofluoranthene, were also measured.Exposures to 1NP were similar in all studied workers, averaging 105 ± 57.9 pg/m~3(±standard deviation). Median urinary concentrations of the average of the pre- and post-exposure samples for 6-hydroxy-1-nitropyrene and 8-hydroxy-1-nitropyrene, were found to be 3.9 and 2.3 pg metabolite/mg creatinine, respectively in the group of occupationally-exposed subjects(n = 17) studied. A direct relationship between workshift exposure to 1NP and urinary 1NP metabolites concentrations was not observed. However,the 1NP exposures and the creatinine-corrected urinary concentrations of the hydroxynitropyrene metabolites in these Peruvian traffic workers were similar to occupationally-exposed taxi drivers in Shenyang, China, and were higher than biomarker levels in office workers from Trujillo without occupational exposure to vehicle exhaust.This study provides further evidence that urinary metabolites of 1NP are associated with exposure to DE and may serve as a useful exposure biomarker.     

Mitigation needs adaptation: Tropical forestry and climate change

The relationship between tropical forests and global climate change has so far focused on mitigation, while much less emphasis has been placed on how management activities may help forest ecosystems adapt to this change. This paper discusses how tropical forestry practices can contribute to maintaining or enhancing the adaptive capacity of natural and planted forests to global climate change and considers challenges and opportunities for the integration of tropical forest management in broader climate change adaptation. In addition to the use of reduced impact logging to maintain ecosystem integrity, other approaches may be needed, such as fire prevention and management, as well as specific silvicultural options aimed at facilitating genetic adaptation. In the case of planted forests, the normally higher intensity of management (with respect to natural forest) offers additional opportunities for implementing adaptation measures, at both industrial and smallholder levels. Although the integration in forest management of measures aimed at enhancing adaptation to climate change may not involve substantial additional effort with respect to current practice, little action appears to have been taken to date. Tropical foresters and forest-dependent communities appear not to appreciate the risks posed by climate change and, for those who are aware of them, practical guidance on how to respond is largely non-existent. The extent to which forestry research and national policies will promote and adopt management practices in order to assist production forests adapt to climate change is currently uncertain. Mainstreaming adaptation into national development and planning programs may represent an initial step towards the incorporation of climate change considerations into tropical forestry.     

Photodegradation of Diquat and Paraquat in aqueous solutions by titanium dioxide: evolution of degradation reactions and characterisation of intermediates

The titanium dioxide assisted photodegradation of Diquat and Paraquat herbicides solutions has been the subject of the present investigation, considering its direct application in the treatment of contaminated waters and soils. To have a better understanding of the photodegradation process, different types of TiO2, commercial and 'home prepared' Ti(1-x)FexO2 (x = 0% and 4%), were used as catalysts, using an UV light as radiation source. The degradation reactions were followed by UV spectroscopy and the intermediates and reaction products were characterised by electrospray ionisation mass spectrometry (ESIMS) combined with collision-induced dissociation (CID) and tandem mass spectrometry (MS/MS). The present study shows that, for photocatalytic degradation of Diquat and Paraquat solutions, a basic pH can be determinant, as well as the type of catalyst. The type of catalyst can also strongly influence the degradation pattern of the herbicide. Regarding complete degradation, we were able to show that Diquat is more persistent than Paraquat. During the photocatalytic processes, several intermediate and reaction products are sequentially formed, to which structures are proposed.     

Construction and demolition waste as recycled aggregate for environmentally friendly concrete paving

Environmental Science and Pollution Research - Recycled aggregates (RA) from construction and demolition waste (CDW) instead of natural aggregates (NA) were analysed in the manufacture of new...