毒死蜱工艺废水预处理研究

毒死蜱工艺废水中含有吡啶类衍生物,属高浓度、难降解有毒有机废水.采用电催化氧化-微电解-混凝沉淀组合工艺对毒死蜱工艺废水进行预处理研究,结果表明,当电催化氧化单元进水pH值为3～4、电流密度为14mA/cm2、主反应器HRT为150 min,微电解单元铁炭比1∶1、进水pH值为3～4、HRT为100 min时,COD,TP,TOC的去除率分别为32.49％,37.39％,51.4％;在电催化氧化单元COD去除率出现负值,表明废水中吡啶类物质被有效分解.高效液相色谱分析结果表明,该预处理工艺对废水中3,6,5-三氯吡啶醇有着很好的去除效果,去除率达到99.9％以上.GC--MS分析结果表明,该预处理工艺对废水中的3,6,5-三氯吡啶醇分解彻底.     

饮用水水源地水质监测预警管理信息系统开发与应用

结合饮用水水源地管理需求,设计开发包含在线监测、模拟分析、水质预警和风险应急等模块的饮用水水源地水质监测预警管理信息系统.本文介绍了该系统的功能设计.     

含镉的铬废水处理方法

对电镀镉工艺流程中出光、钝化及退镉进行了原理分析,得出上述工序必然会导致含镉的铬废水的产生。并提出了采用按铬废水处理后再通过添加重金属捕捉剂的方式,有效控制了电镀废水的处理质量,达到了标准的排放要求。     

纳米金属颗粒在土壤-植物系统中的迁移转化及生物效应研究进展

纳米金属颗粒的安全性是我国纳米产业发展亟需解决的重要课题,认识纳米金属颗粒在土壤-植物系统中的迁移转化和生物效应是其安全性研究的重要内容. 本文系统阐述了纳米金属颗粒在土壤中的迁移转化、在植物中的运输过程和机制以及在植物中的生物转化及其对植物的生物学效应,并在此基础上提出未来研究展望. 结果表明:①复杂的土壤环境(pH、离子强度、离子价态、温度、溶解性有机质)能够影响纳米金属颗粒在土壤中的迁移及其形态转化(吸附/解吸、分散/沉降、解离和氧化/还原);②纳米金属颗粒首先吸附在植物的根部,再通过质外体或共质体途经向植物内部转移,由木质部和韧皮部组成的维管系统进行转运;③根际分泌物以及植物体内的蛋白质与有机酸等对纳米金属颗粒在植物中的生物转化起到重要作用;④纳米金属颗粒可以通过引起氧化应激或抑制营养元素吸收对植物产生毒性效应. 为此,提出未来研究展望:建议重点关注纳米金属颗粒在土壤中形态转变过程的耦合效应,以及各赋存形态在植物体内的运输途径、生物转化过程机制及其对植物生物效应的贡献等.      

Influence of dissolved organic matter on methylmercury transformation during aerobic composting of municipal sewage sludge under different C/N ratios

Current knowledge about the transformation of total mercury and methylmercury (MeHg) in aerobic composting process is limited. In this study, the composition and transformation of mercury and dissovled organic matter (DOM) in aerobic composting process of municipal sewage sludge were were comprehensively characterized, and the differences among the three C/N ratio (20, 26 and 30) were investigated. The main form of mercury in C/N 20 and 26 was organo-chelated Hg (F3, 46%-60%); while the main form of mercury in C/N 30 was mercuric sulfide (F5, 64%-70%). The main component of DOM in C/N 20 and 26 were tyrosine-like substance (C1, 53%-76%) while the main fractions in C/N 30 were tyrosine-like substance (C1, 28%-37%) and fulvic-like substance (C2, 17%-39%). The mercury and DOM varied significantly during the 9 days composting process. Compared to C/N 20 and 26, C/N 30 produced the less MeHg after aerobic composting process, with values of 658% (C/N 20), 1400% (C/N 26) and 139% (C/N 30) of the initial, respectively. Meanwhile, C/N 30 produced the best compost showed greater degree of DOM molecular condensation and humification. Hg fraction had been altered by DOM, as indicated by a significant correlation between mercury species and DOM components. Notably, C/N 30 should be used as an appropriate C/N ratio to control the methylation processes of mercury and degration of DOM.     

复杂环境下有毒气体泄漏侦检与应急救援

结合二维GIS的宏观性、整体性和三维GIS场景的局部性、现实性、直观性优点,建立二、三维一体化应急GIS平台,为复杂环境气体泄漏侦检和应急救援提供有效的平台支撑,并以此为基础实现有毒气体泄漏侦检、警戒范围设定、事故模拟、应急救援等功能。     

Understanding the electrode reaction process of dechlorination of 2,4-dichlorophenol over Ni/Fe nanoparticles: Effect of pH and 2,4-dichlorophenol concentration

Herein,with the exploitation of iron and nickel electrodes,the 2,4-dichlorophenol(2,4-DCP)dechlorinating processes at the anode and cathode,respectively,were separately studied via various electrochemical techniques(e.g.,Tafel polarization,linear polarization,electrochemical impedance spectroscopy).With this in mind,Ni/Fe nanoparticles were prepared by chemical solution deposition,and utilized to test the dechlorination activities of 2,4-DCP over a bimetallic system.For the iron anode,the results showed that higher 2,4-DCP concentration and solution acidity aggravated the corrosion within the electrode.The charge transfer resistance(R_(ct))values of the iron electrode were 703,473,444,and 437Ω·cm~2 for the initial 2,4-DCP concentrations of0,20,50,and 80 mg/L,respectively.When the bulk pH of the 2,4-DCP solution varied from 3.0,5.0to 7.0,the corresponding R_(ct) values were 315,376,and 444Ω·cm~2,respectively.For the nickel cathode,the reduction current densities on the electrode at-0.75 V(vs.saturated calomel electrode)were 80,106,and 111μA/cm~2,for initial 2,4-DCP concentrations of 40,80,and125 mg/L.The dechlorination experiments demonstrated that when the initial pH of the solution was 7.0,5.0,and 3.0,the dechlorination percentage of 2,4-DCP by Ni/Fe nanoparticles was 62%,69%,and 74%,respectively,which was in line with the electrochemical experiments.10 wt.%Ni loading into Ni/Fe bimetal was affordable and gave a good dechlorination efficiency of 2,4-DCP,and fortunately the Ni/Fe nanoparticles remained comparatively stable in the dechlorination processes at pH 3.0.     

Online single particle measurement of fireworks pollution during Chinese New Year in Nanning

Time-resolved single-particle measurements were conducted during Chinese New Year in Nanning, China. Firework displays resulted in a burst of SO_2, coarse mode, and accumulation mode(100–500 nm) particles. Through single particle mass spectrometry analysis, five different types of particles(fireworks-metal, ash, dust, organic carbon-sulfate(OC-sulfate), biomass burning) with different size distributions were identified as primary emissions from firework displays. The fireworks-related particles accounted for more than70% of the total analyzed particles during severe firework detonations. The formation of secondary particulate sulfate and nitrate during firework events was investigated on single particle level. An increase of sulfite peak(80SO_3~-) followed by an increase of sulfate peaks(97HSO_4~-+ 96SO_4~-) in the mass spectra during firework displays indicated the aqueous uptake and oxidation of SO_2 on particles. High concentration of gaseous SO_2, high relative humidity and high particle loading likely promoted SO_2 oxidation. Secondary nitrate formed through gas-phase oxidation of NO_2 to nitric acid, followed by the condensation into particles as ammonium nitrate. This study shows that under worm, humid conditions, both primary and secondary aerosols contribute to the particulate air pollution during firework displays.     

南京市秋季细颗粒物及臭氧生成敏感性初探

为考察江苏省南部地区重点排放源对南京市秋季细颗粒物(PM_(2.5))的贡献率及O_3生成敏感性,采用强力法针对特定排放源及污染物设置不同的排放情景,利用化学传输模拟系统Models-3/Community Multi-scale Air Quality(CMAQ)分析模拟区域内不同情景下地表PM_(2.5)及O_3浓度变化。2012年10月,电厂、钢铁和水泥的污染物排放对南京市PM_(2.5)浓度的平均贡献率分别为6.0%、25.5%和15.9%,对国控站点的贡献率分别为7.2%、17.7%和16.2%。钢铁对下风向区域的地表PM_(2.5)浓度的影响显著高于电厂及水泥部门的排放。从不同情境下模拟O_3地表浓度变化结果看出,南京市城区及下风向区域的O_3浓度随VOC排放削减降低,随NO_x排放削减升高,因而判定南京市秋季O_3生成属于VOC控制区。     

垃圾填埋场区域氨氮污染地下水的修复方案比选

早期建设的简易生活垃圾填埋场的防渗措施不足,易发生渗漏,造成填埋场周围地下水的氨氮浓度升高。文章针对华中地区某垃圾填埋场区域氨氮污染地下水,提出抽取处理加异位生物修复、空气注入加原位生物修复两种修复方案,并采用AHP-TOPSIS(层次分析法-逼近理想排序)方法进行方案的比选。在建立合适的比选指标体系基础上,采用AHP-TOPSIS方法进行综合比选研究。结果表明,空气注入+原位生物修复技术更适合于该区域地下水的修复。TOPSIS方法由于缺乏确定评价指标权重的过程,在层次多元分析中的应用受到限制,而AHP是多层次多因素权重确定的有效工具,将二者结合起来,先由AHP确定指标权重,再运用TOPSIS对备选地下水修复方案进行排序,从而弥补了二者各自的不足。AHP-TOPSIS方法可作为环境工作者进行场地修复方案比选的有效工具。