Size distribution of polycyclic aromatic hydrocarbons in urban and suburban sites of Beijing, China

PAHs in five-stage size segregated aerosol particles were investigated in 2003 at urban and suburban sites of Beijing. The total concentration of 17 PAHs ranged between 0.84 and 152 ng m(-3), with an average of 116 ng m(-3), in urban area were 1.1-6.6 times higher than those measured in suburban area. It suggested a serious pollution level of PAHs in Beijing. PAHs concentrations increased with decreasing the ambient temperature. Approximately 68.4-84.7% of PAHs were adsorbed on particles having aerodynamic diameter 2.0 microm. Nearly bimodal distribution was found for PAHs with two and three rings, more than four rings PAHs, however, followed unimodal distribution. The overall mass median diameter (MMD) for PAHs decreased with increasing molecular weight. Diagnostic ratios and normalized distribution of PAHs indicated that the PAHs in aerosol particles were mainly derived from fossil fuel combustion. Coal combustion for domestic heating was probably major contributor to the higher PAHs loading in winter, whereas PAHs in other seasons displayed characteristic of mixed source of gasoline and diesel vehicle exhaust. Biomass burning and road dust are minor contributors to the PAHs composition of these aerosol particles. Except for source emission, other factors, such as meteorological condition, photochemical decay, and transportation from source to the receptor site, should to be involved in the generation of the observed patterns.     

公交行业金属清洗废液处理工艺研究

清洗废液中含有各种形态的油份，污泥悬浮物及表面活性剂。经预处理及一级处理后，ＣＯＤ总去除率９０％，浊度，油份总去除率９５％以上，清洗液可循环回用。     

Modification of a magnetic carbon composite for ciprofloxacin adsorption

A magnetic carbon composite, Fe₃O₄/C composite, was fabricated by one-step hydrothermal synthesis, modified by heat treatment under an inert atmosphere (N₂), and then used as an adsorbent for ciprofloxacin (CIP) removal. Conditions for the modification were optimized according to the rate of CIP removal. The adsorbent was characterized by Fourier transform infrared spectroscopy, X-ray diffraction measurements, vibrating-sample magnetometry, scanning electron microscopy, transmission electron microscopy, and N₂ adsorption/desorption isotherm measurements. The results indicate that the modified adsorbent has substantial magnetism and has a large specific area, which favor CIP adsorption. The effects of solution pH, adsorbent dose, contact time, initial CIP concentration, ion strength, humic acid and solution temperature on CIP removal were also studied. Our results show that all of the above factors influence CIP removal. The Langmuir adsorption isotherm fits the adsorption process well, with the pseudo second-order model describing the adsorption kinetics accurately. The thermodynamic parameters indicate that adsorption is mainly physical adsorption. Recycling experiments revealed that the behavior of adsorbent is maintained after recycling for five times. Overall, the modified magnetic carbon composite is an efficient adsorbent for wastewater treatment.     

Remediation of saline–sodic soil with flue gas desulfurization gypsum in a reclaimed tidal flat of southeast China

Salinization and sodicity are obstacles for vegetation reconstruction of coastal tidal flat soils. A study was conducted with flue gas desulfurization(FGD)-gypsum applied at rates of 0, 15, 30, 45 and 60 Mg/ha to remediate tidal flat soils of the Yangtze River estuary.Exchangeable sodium percentage(ESP), exchangeable sodium(ExNa), p H, soluble salt concentration, and composition of soluble salts were measured in 10 cm increments from the surface to 30 cm depth after 6 and 18 months. The results indicated that the effect of FGD-gypsum is greatest in the 0–10 cm mixing soil layer and 60 Mg/ha was the optimal rate that can reduce the ESP to below 6% and decrease soil p H to neutral(7.0). The improvement effect was reached after 6 months, and remained after 18 months. The composition of soluble salts was transformed from sodic salt ions mainly containing Na~+, HCO_3~-+ CO_3~(2-)and Cl-to neutral salt ions mainly containing Ca~(2+)and SO_4~(2-). Non-halophyte plants were survived at 90%. The study demonstrates that the use of FGD-gypsum for remediating tidal flat soils is promising.     

压裂返排液循环使用技术综述

综述了传统处理方法和深度处理方法两大类压裂返排液处理方法的特点和处理效率。介绍了对氧化破胶的压裂返排液和非氧化破胶的压裂返排液进行处理的方法和机理,以及返排液循环使用效果和性能检测的标准。指出研发含有高分子聚合物稠化剂的返排液循环使用工艺、高效便捷的压裂返排液循环使用工艺和新型可循环使用的压裂液体系等将是未来压裂返排液循环使用的发展方向。     

高放废物地质处置关键核素在粘土岩预选区中的迁移模拟研究

利用GMS计算了放射性核素Nb-93 m,Se-79,Tc-99,Zr-93,Sn-126在陇东预选区中百万年尺度的污染迁移过程.模拟结果表明:粘土岩由于极低的渗透性和较强的吸附能力,能够有效的阻止核素在围岩中的迁移.其中,迁移距离最大的核素为Se-79,最大迁移距离为242 m,在距泄露点68 m处其活度浓度的峰值为23000 Bq/l,处置库在百万年内总的活度释放量约为4.3E18Bq,其中起主要贡献的核素是Se-79,其次是Tc-99.     

粘土岩处置库陇东预选区社会经济条件调查研究

对陇东地区进行社会经济条件调查,得出陇东地区内有庆阳市和平凉市两大城市,以2013年统计数据为准,庆阳市和平凉市平均人口密度分别为97人/平方千米和219人/平方千米,均高于甘肃省平均人口密度(61人/平方千米);陇东地区生产总值达947．29亿元,占甘肃省生产总值的15．11%,属经济发达地区;且陇东地区含有丰富的煤炭和石油资源;可以得知陇东地区区域人口密度高,经济发达,资源丰富。从社会经济条件分析,陇东地区不适合作为中国高放废物粘土岩地质处置库预选区。     

Losses to the environment from the multilevel cycle of anthropogenic lead

As a component of a multi-level study of the anthropogenic lead cycle for year 2000 (52 countries, 8 regions, and the planet), we have estimated the lead flows in seven emission streams: tailings, slag, fabrication and manufacturing, dissipation from use, hibernation, landfilling, and dispersion following product discard. For every 1 kg of lead put into end use, 0.5 kg is lost to the environment, largely due to landfilling and dissipation from use. From the standpoint of the receiving media, 1/3 of the losses are to uncontained solids on land and 48% of the losses are to containment facilities on land. On a country basis, the largest losses occur in the United States and China, which between them are responsible for about 32% of total global lead losses. On a per capita basis, the highest lead losses occurred in the United Kingdom, Belgium-Luxembourg, and Ireland.     

Role of extractable and residual organic matter fractions on sorption of phenanthrene in sediments

Two sediments were demineralized and sequentially fractionated into extracted fractions [free lipid (FL), bound lipid (BL) and lignin (LG)] and residual fractions [free lipid free (FLF), bound lipid free (BLF) and lignin free (LGF)]. The sorption isotherms of phenanthrene (Phen) were examined to evaluate the importance of various fractions on sorption. A lignin extraction procedure was for the first time applied to separate the lignin or degraded lignin fraction from sediment organic matter (SOM). The extracted LG was similar to model lignin in terms of elemental ratios and sorption behavior. FL and LG fractions were quite important, as their contents were much higher than reported values. Phen sorption for the extracted fractions was almost linear, whereas that for the residual fractions was nonlinear, especially for LGF with n 0.56–0.63. As the different organic fractions were removed sequentially, sorption energy distribution on the residual sediment organic matter (SOM) became more heterogeneous. In addition, increasing sorption capacity for the residual fractions, except for BLF with its high polarity, suggested that more sorption sites on the SOM matrix became accessible to Phen. The sorption capacity for LGF was comparable to that of condensed SOM. The residual fraction LGF generally controlled the overall sorption at low Phen concentration, but the extractable fraction FL surpassed the former fraction at high Phen concentration, demonstrating the importance of condensed SOM in the sorption of hydrophobic organic compounds (HOCs) in sediments.