Wet and dry deposition of 129I in Seville (Spain) measured by accelerator mass spectrometry.

Iodine-129 (T1/2 = 1.57 x 10(7) yr) concentrations have been determined by accelerator mass spectrometry in rainwater samples taken at Seville (southwestern Spain) in 1996 and 1997. This technique allows a reduction in the detection limits for this radionuclide in comparison to radiometric counting and other mass spectrometric methods such as ICP-MS. Typical 129I concentrations range from 4.7 x 10(7) 129I atoms/l (19.2%) to 4.97 x 10(9) 129I atoms/l (5.9%), while 129I depositions are normally in the order of 10(8)-10(10) atoms/m2d. These values agree well with other results obtained for recent rainwater samples collected in Europe. Apart from these, the relationship between 129I deposition and some atmospheric factors has been analyzed, showing the importance of the precipitation rate and the concentration of suspended matter in it.     

Extractable atrazine and its metabolites in agricultural soils from the temperate humid zone

Extractable atrazine and its metabolites (hydroxyatrazine, deethylatrazine and deisopropylatrazine) were evaluated in agricultural soils from the temperate humid zone (Galicia, NW Spain) under laboratory conditions. The experiment was performed with five soils with different properties (organic C, soil texture and atrazine application history), both unamended and treated with atrazine at field application rate. Measurements of the atrazine compounds were made at different time intervals (1, 3, 6, 9 and 12 weeks) during a 3-month incubation period. Results showed that only hydroxyatrazine was detected in the extractable fraction of the unamended soils, with values remaining relatively constant throughout the incubation period. Atrazine addition notably increased the concentration of the parent compound and its degradation products; deisopropylatrazine and hydroxyatrazine were the main metabolites detected in the extractable fraction of the treated soils, whereas deethylatrazine was not detected. After 7 days incubation, values of total extractable residues, expressed as percentage of initially added atrazine, ranged from 75 to 86% (25–68% of atrazine, 7–11% of hydroxyatrazine and 9–57% of deisopropylatrazine). The values decreased rapidly during the first 3 weeks of incubation, showing values of 2–8% in soils with higher atrazine application and from 28 to 30% in soils with lower application history. At the end of the incubation, 2–8% of total extractable residues were still detected (0–4% of atrazine, 2–3% of hydroxyatrazine and 0–2% of deisopropylatrazine), indicating a residual effect of atrazine addition. These variations in the extractable fraction indicated that most added atrazine was rapidly degraded, especially in soils with higher application history.     

Advertisement-call modification,male competition,and female preference in the bird-voiced treefrog <Emphasis Type="Italic">Hyla avivoca</Emphasis>

Senders and receivers influence dynamic characteristics of the signals used for mate attraction over different time scales. On a moment-to-moment basis, interactions among senders competing for a mate influence dynamic characteristics, whereas the preferences of receivers of the opposite gender exert an influence over evolutionary time. We observed and recorded the calling patterns of the bird-voiced treefrog Hyla avivoca to assess how the dynamic characters of calls vary during interactions among groups of males in a chorus. This question was also addressed using playback experiments with males. Playback experiments with females showed how changes in dynamic call properties are likely to affect male mating success. Frogs calling in pairs, groups, or in response to playbacks produced longer calls than did isolated males. During call overlap, males often increased the duration of the silent interval (gaps) between the pulses of their calls so that the pulses of the calls of two neighbors interdigitated. This change resulted in increased variability of pulse rate, a traditionally static acoustic property; however, males also produced high proportions of non-overlapped calls in which variability in pulse rate was low and had species-typical values. Females preferred long calls to short- and average-duration calls, and non-overlapped calls to overlapped calls. Given a choice between pairs of overlapped calls, females preferred pairs in which the proportion of overlap was low and pairs in which the pulses of such calls interdigitated completely. The observed patterns of vocal competition thus reflect the preferences of conspecific females, which have influenced the evolution of the calling behavior of H. avivoca. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Can stable isotope ratios provide for community-wide measures of trophic structure?

Stable isotope ratios (typically of carbon and nitrogen) provide one representation of an organism's trophic niche and are widely used to examine aspects of food web structure. Yet stable isotopes have not been applied to quantitatively characterize community-wide aspects of trophic structure (i.e., at the level of an entire food web). We propose quantitative metrics that can be used to this end, drawing on similar approaches from ecomorphology research. For example, the convex hull area occupied by species in delta13C-delta15N niche space is a representation of the total extent of trophic diversity within a food web, whereas mean nearest neighbor distance among all species pairs is a measure of species packing within trophic niche space. To facilitate discussion of opportunities and limitations of the metrics, we provide empirical and conceptual examples drawn from Bahamian tidal creek food webs. These examples illustrate how this methodology can be used to quantify trophic diversity and trophic redundancy in food webs, as well as to link individual species to characteristics of the food web in which they are embedded. Building from extensive applications of stable isotope ratios by ecologists, the community-wide metrics may provide a new perspective on food web structure, function, and dynamics.     

Health risk assessment maps for arsenic groundwater content: application of national geochemical databases

This investigation assesses the feasibility of calculating and visualizing health risk estimates from exposure to groundwater contaminated with arsenic (As) using data from national geochemical databases. The potential health risk associated with As-contaminated groundwater was assessed based on an elaboration of existing geochemical data in accordance with accepted methodological procedures established for human health risk assessment (U.S. Environmental Protection Agency methodology). A screening analysis approach was used for estimating the contribution of As to the total chronic health risk from exposure to groundwater contaminated with potentially toxic elements, including As, Ba, Cd, Cu, Hg, Pb, Sb, Se and Zn, and the results indicate that As contributes significantly (>50%) to this total health chronic risk in about 10% of Slovak territory. Based on the calculation of the potential risk level by exposure modelling, increased chronic as well as carcinogenic risk levels (medium to high) were documented in approximately 0.2 and 11% of the total Slovak area, respectively. The areas characterized by high health risk levels are mainly those geogenically contaminated. High and very high carcinogenic risk was determined in 34 of 79 districts and in 528 of 2924 municipalities.     

Effect of chromium on the fatty acid composition of two strains of Euglena gracilis

The effect of hexavalent chromium on fatty acid composition was studied in two strains of Euglena gracilis; UTEX 753 (from the Culture Collection of Algae of Texas University, USA) and MAT (isolated from a highly polluted River). Both were grown in photoauxotrophic and photoheterotrophic conditions and exposed to two metal concentrations, one below and one above IC50. The high malondialdehyde (MDA) levels (3 to 7-fold) obtained with chromium concentration above IC50, suggested the existence of metal-induced lipid peroxidation. Total lipid content increased only with concentration below IC50, whereas it was inhibited by higher metal concentration. Photoheterotrophic control strains exhibited a significantly higher proportion of saturated and polyunsaturated fatty acids. Polyunsaturated acids were most affected by chromium, especially those related to chloroplast structures. Ultra-structure studies showed clear thylakoid disorganization in all treated cells. The results indicate that hexavalent chromium affects levels of fatty acids, especially those related to photosynthetic activity.     

Effects of heavy metals and nitroaromatic compounds on horseradish glutathione S-transferase and peroxidase

Glutathione S-transferase (GST) and peroxidase (POX) activities have a direct relation to the effect of stress on plant metabolism. Changes in the activities of the enzymes were therefore studied. Horseradish hairy roots were treated by selected bivalent ions of heavy metals (HMs) and nitroaromatic compounds (NACs). We have shown differences in GST activity when assayed with substrates 1-chloro-2,4-dinitrobenzene (CDNB) and 1,2-dichloro-4-nitrobenzene (DCNB). The conjugation of DCNB catalysed by GST was inhibited in all roots treated with HMs as compared to non-treated roots, whereas NACs caused induction of the activity in dependence on the exposition time and concentration of compounds. The conjugation of CDNB by GST was not affected to the same extent. The increase of GST activity was determined in cultures treated by nickel (0.1 mM) and diaminonitrotoluenes (DANTs, 0.1 mM) for 6 h, whereas the roots treated by 2,4,6-trinitrotoluene (TNT), 4-amino-2,6-dinitrotoluene (ADNT) and dinitrotoluene (DNT, 1.0 mM) needed 27 h treatment to induce the activity. The POX activity of cultures treated by HMs was inhibited to 17-35% in comparison to non-treated cultures. The POX activity of roots treated by TNT (0.1 and 1.0 mM) for 6 and 27 h and by ADNT (0.1 and 1.0 mM) for 6 h was inhibited. A partial increase of POX activity was measured in roots treated by all NACs for 27 h. The content of oxidized glutathione (GSSG) and reduced glutathione (GSH) in the roots differed significantly. It was followed as a symptom of the stress reaction of the plant metabolism to the effect of NACs and HMs.     

Dissolved organic matter fractions formed during composting of winery and distillery residues: evaluation of the process by fluorescence excitation-emission matrix

The aim of the present paper is to assess the maturity degree reached by different samples of several mixtures from winery and distillery residues composted using the Rutgers composting system, by means of excitation-emission matrix (EEM) fluorescence spectroscopy. The composts were sampled once a week for about 200d. EEM spectra indicate the presence of different fluorophores. The fluorescence intensities of these peaks show trends related to the maturity of the composting samples selected. The "contour density" of EEM maps is strongly modified through time. We have used the quantitative method of fluorescence regional integration (FRI). The EEMs were delineated into five excitation-emission regions. The degree of compost maturity could be correlated with the percentage of the volumetric integration under the EEM within each region. Further refinement of these techniques should provide a relatively rapid method for assessing the suitability of the compost to soil application.     

Estimation of wind blown dust emissions in Europe and its vicinity

The assessment of the wind blown dust emission for Europe and selected regions of North Africa and Southwest Asia was carried out using a mesoscale model. The mesoscale model was parameterized based on the current literature review. The model provides data on PM₁₀ emission from several dust reservoirs (anthropogenic, agriculture, semi- and natural) with spatial resolution of 10 × 10 km and temporal resolution of 1 h. The spatial variability of PM₁₀ emission depends on soil texture, land cover/land use as well as meteorological conditions. Lands covered with water or permanently wet were excluded from the model. The land covered with vegetation is treated as dust reservoir whose dust emission capacity depends on the type of vegetation and cover. The dust reservoirs are divided into reservoirs with stable and unstable surface. The changes of emission in time depend on meteorological parameters.The wind blown dust emission should be treated as a non-continuous spatio-temporal process. The emissions are estimated with high uncertainty. The estimated PM₁₀ yearly total load emitted by wind from the European territory is highly differentiated in space and time and is equal to 0.74 Tg. The total load of PM₁₀ emitted by wind from North African and Southwest Asian land surface located in the vicinity of European boundaries is assessed as nearly 50% (0.43 Tg) of the total load estimated for the whole Europe.The average yearly PM₁₀ emission factor for Europe was estimated at 0.139 Mg km^?2.The PM₁₀ emission from agricultural areas is estimated at 52% of the total wind blown emission from the domain of the European Union project “Improving and applying methods for the calculation of natural and biogenic emissions and assessment of impacts to the air quality” - NatAir.PM₁₀ emission factor for natural areas of Europe is estimated at 0.021 Mg km^?2. Appropriate factors for agricultural areas and anthropogenic areas are 0.157 Mg km^?2 and 0.118 Mg km^?2, respectively. The latter two factors are probably underestimated due to omitting in the model of other dust emission mechanisms than aeolian erosion.