Infrared differential absorption Lidar (DIAL) measurements of hydrocarbon emissions

We report the application of an infrared (IR) differential absorption Lidar (DIAL) system (also capable of ultra violet measurements) built at the National Physical Laboratory (NPL), UK, to field measurements of total site emissions (controlled and fugitive) from petrochemical and landfill installations. The validation of the IR-DIAL was carried out via a series of controlled field experiments including comparison to GC analysis and tests against controlled methane releases from a test stack, all detailing agreements on the order of ±20%. In volatile organic compound (VOC) measurements at a UK petrochemical site it was found that the American Petroleum Institute's methodology of the time for calculating the emitted flux underestimated by a factor of 2.4. Also, in a similar field trial it was found that scaling traditional point measurements at easily accessible flanges and valves to represent all flanges and valves on a site led to an underestimation by a factor of 6. In addition to petrochemical examples we also report field measurements from a landfill site to demonstrate the advantageous of the DIAL technique for monitoring area emission sources. In this case study it was found that active (still being filled) cells resulted in significantly greater VOC emission rates (30 kg h(-1)) than closed (≤ 10 kg h(-1)).     

Chemical solutions for greywater recycling

Greywater recycling is now accepted as a sustainable solution to the general increase of the fresh water demand, water shortages and for environment protection. However, the majority of the suggested treatments are biological and such technologies can be affected, especially at small scale, by the variability in strength and flow of the greywater and potential shock loading. This investigation presents the study of alternative processes, coagulation and magnetic ion exchange resin, for the treatment of greywater for reuse. The potential of these processes as well as the influence of parameters such as coagulant or resin dose, pH or contact time were investigated for the treatment of two greywaters of low and high organic strengths. The results obtained revealed that magnetic ion exchange resin and coagulation were suitable treatment solutions for low strength greywater sources. However, they were unable to achieve the required level of treatment for the reuse of medium to high strength greywaters. Consequently, these processes could only be considered as an option for greywater recycling in specific conditions that is to say in case of low organic strength greywater or less stringent standards for reuse.     

A new multipollutant, no-threshold air quality health index based on short-term associations observed in daily time-series analyses

Air quality indices currently in use have been criticized because they do not capture additive effects of multiple pollutants, or reflect the apparent no-threshold concentration-response relationship between air pollution and health. We propose a new air quality health index (AQHI), constructed as the sum of excess mortality risk associated with individual pollutants from a time-series analysis of air pollution and mortality in Canadian cities, adjusted to a 0-10 scale, and calculated hourly on the basis of trailing 3-hr average pollutant concentrations. Extensive sensitivity analyses were conducted using alternative combinations of pollutants from single and multipollutant models. All formulations considered produced frequency distributions of the daily maximum AQHI that were right-skewed, with modal values of 3 or 4, and less than 10% of values at 7 or above on the 10-point scale. In the absence of a gold standard and given the uncertainty in how to best reflect the mix of pollutants, we recommend a formulation based on associations of nitrogen dioxide, ozone, and particulate matter of median aerodynamic diameter less than 2.5 microm with mortality from single-pollutant models. Further sensitivity analyses revealed good agreement of this formulation with others based on alternative sources of coefficients drawn from published studies of mortality and morbidity. These analyses provide evidence that the AQHI represents a valid approach to formulating an index with the objective of allowing people to judge the relative probability of experiencing adverse health effects from day to day. Together with health messages and a graphic display, the AQHI scale appears promising as an air quality risk communication tool.     

Cadmium accumulation and tolerance of two castor cultivars in relation to antioxidant systems

To investigate the effects of Cd on tolerance and antioxidant activities of castor, two different castor（Ricinus communis L.） cultivars（Zibo No. 5 and Zibo No. 8） were used for a hydroponic experiment（0, 1 and 2 mg/L Cd） and a pot experiment using Cd-contaminated soil（34 mg/kg） with the addition of ethylenedinitrilotetraacetic acid（EDTA）. The results indicated that there were significant differences between the two cultivars with respect to Cd uptake in shoots（113–248 mg/kg for Zibo No. 5 and 130–288 mg/kg Zibo No. 8）, biomass tolerance indexes（64.9%–74.6% for Zibo No. 5 and 80.1%–90.9% for Zibo No. 8） in the hydroponic experiment and survival rates（0% for Zibo No. 5 and 100% for Zibo No. 8）determined by the addition of EDTA in the pot experiment, suggesting that Zibo No. 8 has higher tolerance than Zibo No. 5. Moreover, the castor cultivars have low bioconcentration factors（4.80% for Zibo No. 5 and 5.43% for Zibo No. 8） and low translocation factors（〈1%）.Consequently, Zibo No. 8 can participate in Cd phytostabilization in highly Cd-polluted areas. The results indicated that glutathione（GSH） as a non-enzymatic antioxidant, and antioxidant enzymes including superoxide dismutase（SOD）, catalase（CAT） and guaiacol peroxidase（GPX）, were cultivar- and dose-dependent. The higher tolerance of Zibo No. 8compared with Zibo No. 5 can be attributed to the higher GSH levels in the root and higher GPX activity in the leaf.     

Risk Tradeoffs in Adaptive Ecosystem Management: The Case of the U.S. Forest Service

Natural resource planning processes on public lands in the United States are driven in large part by the requirements of the National Environmental Policy Act (NEPA), which dictates general processes for analyzing and disclosing the likely impacts of proposed actions. The outcomes of these processes are the result of multiple factors, many related to the manifold smaller incremental decisions made by agency personnel directing the processes. Through interviews with decision makers, team leaders, and team members on five NEPA processes within the U.S. Forest Service, this study examines those incremental decisions. Risk, in particular external relationship risk, emerged as a dominant lens through which agency personnel weigh and make process-related decisions. We discuss the tradeoffs associated with agency actors’ emphasis on this form of risk and their potential implications for adaptive ecosystem management and organizational performance.     

Metacommunity influences on community richness at multiple spatial scales: a microcosm experiment

Large-scale processes are known to be important for patterns of species richness, yet the ways in which local and larger scale processes interact is not clear. I used metacommunities consisting of five interconnected microbial aquatic communities to examine the manner in which processes at different scales affect local and metacommunity richness. Specifically, I manipulated the potential dispersal rate, whether dispersal was localized or global, and variation in initial community composition. A repeated-measures ANOVA showed that a low dispersal rate and intermediate distance dispersal enhanced local richness. Initial assembly variation had no effect on local richness, while a lack of dispersal or global dispersal reduced local richness. At the metacommunity scale, richness was enhanced throughout the time course of the experiment by initial compositional variation and was reduced by high or global dispersal. The effects of dispersal were contingent on the presence of initial compositional variation. The treatments also affected individual species occupancy patterns, with some benefiting from large-scale processes and others being adversely impacted. These results indicate that the effects of dispersal on species richness have a complex relationship with scale and are not solely divisible into "regional" vs. "local" scales. Finally, predictions of the manner in which dispersal rate structures communities appear dependent upon species compositional variation among communities.     

Hydrologic Landscape Characterization for the Pacific Northwest,USA

We update the Wigington et al. (2013) hydrologic landscape (HL) approach to make it more broadly applicable and apply the revised approach to the Pacific Northwest (PNW; i.e., Oregon, Washington, and Idaho). Specific changes incorporated are the use of assessment units based on National Hydrography Dataset Plus V2 catchments, a modified snowmelt model validated over a broader area, an aquifer permeability index that does not require preexisting aquifer permeability maps, and aquifer and soil permeability classes based on uniform criteria. Comparison of Oregon results for the revised and original approaches found fewer and larger assessment units, loss of summer seasonality, and changes in rankings and proportions of aquifer and soil permeability classes. Differences could be explained by three factors: an increased assessment unit size, a reduced number of permeability classes, and use of smaller cutoff values for the permeability classes. The distributions of the revised HLs in five groups of Oregon rivers were similar to the original HLs but less variable. The improvements reported here should allow the revised HL approach to be applied more often in situations requiring hydrologic classification and allow greater confidence in results. We also apply the map results to the development of hydrologic landscape regions.     

The use of respirometric measurements to determine the toxicity of textile dyes in aqueous solution and after oxidative decolourisation processes

Selected results from the degradation of reactive-dye hydrolysates after UV irradiation, ozonation and sodium peroxodisulphate (NaPS) treatment are presented. Reactive dyes with representative chromophores and anchor groups were chosen for the research project. Different stages of oxidative decolourisation were examined and determined by water parameters for biological degradation (BOD). The paper focuses on toxicity tests with Pseudomonas putida to consider whether the oxidative treatments result in products with a risk for the environment. Tests were performed with the AQUALYTIC^® Sensomat System, which measures biological oxygen demand (BOD). It was determined that the chosen oxidative treatments had as a rule no bearing on respiration of P. putida. Experiments with hydrolysates after short-term UV irradiation resulted in a slightly increased but not long-lasting toxicity in comparison with treatments with ozone or NaPS. Toxic effects were found in tests with hydrolysates of metalliferous dyes. During oxidative treatment, metals were liberated from the chromophores. This did cause complete inhibition of respiration of P. putida. Dye Blue E, a member of a dye class with chlorotriazine anchor groups, was itself found to be toxic, caused by the reactivity of the anchor group. The hydrolysate is only of minor toxicity.     

Biomonitoring of airborne mercury with perennial ryegrass cultures

A biomonitoring network with grass cultures was established near a chlor-alkali plant and the mercury concentration in the cultures were compared with the average atmospheric total gaseous mercury (TGM). Biomonitoring techniques based on different exposure periods were carried out. When comparing the mercury concentration in the grass cultures, both the average atmospheric TGM concentration during exposure and the exposure time determined to a large extent the accumulation rate of TGM. The maximum tolerable level of mercury in grass (approximately equal to 110 microg kg(-1) DM) corresponds with an average TGM concentration of 11 ng m(-3) for 28 days exposure. The background concentrations in grass were on an average 15 microg kg(-1) DM and the effect detection limit (EDL) was 30 microg kg(-1) DM. This value corresponds with an average TGM concentration of 3.2 and 4.2 ng m(-3) for 28 and 14 days exposure, respectively, which is in turn the biological detection limit (BDL) of ambient TGM. Exposures for 7 days were less appropriate for biomonitoring.     

PAHs in the bulk atmospheric deposition of the Seine river basin: source identification and apportionment by ratios, multivariate statistical techniques and scanning electron microscopy

The origin of polycyclic aromatic hydrocarbons (PAH) contamination in bulk atmospheric deposition at two sites of the Seine estuary, one urban and one industrial, has been investigated. The PAH profiles indicate that PAHs mainly have a pyrolytic origin, both in urban and industrial areas. PAH sources vary during the year with an increase of high molecular weight PAH proportions (especially for carcinogenic PAHs) in winter, that means an increase of combustion processes such as domestic heating. Ratios of indicator PAHs (FTH/FTH+PYR and IcdP/IcdP+BghiP) confirm the pyrolytic origin of PAHs. In summer, ratios show the presence of industrial sources. In addition to these two methods, a factor analysis/multiple linear regression model was applied and gave an approximation of PAH source apportionment. PAH were found to be associated predominantly with emissions from road traffic (gasoline and diesel), that accounts for 17-34%. Domestic heating is a very important PAH source in urban areas and accounts for up to 85% of PAHs in winter. Industrial emissions (refineries...) account for 25% in the industrial area in summer. Each is an identified source category for the region and these results are consistent with fly-ashes identified by scanning electron microscopy. This study demonstrates that a combination of source identification methods is a far more efficient than one method alone.