The reuse of reclaimed water for irrigation around the Mediterranean Rim: a step towards a more virtuous cycle?

Regional Environmental Change - Climate change and a growing population around the Mediterranean Rim are increasing the need for water and, consequently, the pressure on resources in terms of both...     

On the successful use of a simplified model to simulate the succession of toxic cyanobacteria in a hypereutrophic reservoir with a highly fluctuating water level

Many freshwater bodies worldwide that suffer from harmful algal blooms would benefit for their management from a simple ecological model that requires few field data, e.g. for early warning systems. Beyond a certain degree, adding processes to ecological models can reduce model predictive capabilities. In this work, we assess whether a simple ecological model without nutrients is able to describe the succession of cyanobacterial blooms of different species in a hypereutrophic reservoir and help understand the factors that determine these blooms. In our study site, Karaoun Reservoir, Lebanon, cyanobacteria Aphanizomenon ovalisporum and Microcystis aeruginosa alternatively bloom. A simple configuration of the model DYRESM-CAEDYM was used; both cyanobacteria were simulated, with constant vertical migration velocity for A. ovalisporum, with vertical migration velocity dependent on light for M. aeruginosa and with growth limited by light and temperature and not by nutrients for both species. The model was calibrated on two successive years with contrasted bloom patterns and high variations in water level. It was able to reproduce the measurements; it showed a good performance for the water level (root-mean-square error (RMSE) lower than 1 m, annual variation of 25 m), water temperature profiles (RMSE of 0.22–1.41 °C, range 13–28 °C) and cyanobacteria biomass (RMSE of 1–57 μg Chl a L^?1, range 0–206 μg Chl a L^?1). The model also helped understand the succession of blooms in both years. The model results suggest that the higher growth rate of M. aeruginosa during favourable temperature and light conditions allowed it to outgrow A. ovalisporum. Our results show that simple model configurations can be sufficient not only for theoretical works when few major processes can be identified but also for operational applications. This approach could be transposed on other hypereutrophic lakes and reservoirs to describe the competition between dominant phytoplankton species, contribute to early warning systems or be used for management scenarios.     

Bioaerosols concentrations in working areas in biomethanization facilities

This study sought to fill the gap in information about the type and the concentration of bioaerosols present in the air of biomethanization facilities (BF). Evaluation of bioaerosol composition and concentration was achieved in two biomethanization facilities located in Eastern Canada, during summer and winter. In order to have a thorough understanding of the studied environment, the methodology combined culture of bacteria and molds, qualitiative polymerase chain reaction (qPCR) for specific microorganisms, endotoxin quantification, and next-generation sequencing (NGS) for bacterial diversity. Results revealed that workers in biomethanization facilities are exposed to bioaerosols and pathogenic microorganisms similar to those found in composting plants. However, human exposure levels to bioaerosols are lower in BF than in composting plants. Despite these differences, use of personal protective equipment is recommended to lower the risks of health problems.

Implications: Biomethanization is a new technology used in eastern Canada for waste management. In the next few years, it is expected that there will be an expansion of facilities in response of tight governmental regulations. Workers in biomethanization facilities are exposed to various amounts of bioaerosols composed of some harmful microorganisms. Therefore, monitoring this occupational exposure could be an interesting tool for improving worker’s health.     

Policy Utopias for Nutrient Credit Trading Programs with Nonpoint Sources

A promising program to address water contamination from nutrients is water quality trading (WQT), whereby entities with high abatement costs purchase credits from entities with lower abatement costs. The concept has found some success with point source water pollution, but very few trades have occurred in over 50 programs in the United States (U.S.) that have focused on nonpoint sources (NPSs). To understand why success has been slow, we identified three environments needed for programs to succeed: physical, economic, and institutional. We estimate that only 5% of watersheds in the U.S. currently listed as nutrient impaired provide a viable physical environment for trading nitrogen; 13% are suitable for phosphorus. Economic and institutional challenges would shrink that domain even further. Therefore, we find places with the ideal physical, economic, and institutional environments necessary for feasible WQT programs are virtual policy utopias — rare places with ideal environments. Fortunately, a growing literature provides the tools necessary to identify where these policy utopias are and to expand that domain through a better understanding about how to manage WQT programs more effectively.     

Metal Extraction from Road Sediment using Different Strength Reagents: Impact on Anthropogenic Contaminant Signals

Washoff of road deposited sediment into storm drainsystems is one of the major contributors to nonpoint sourcepollution in urban fluvial networks. These sediments contain avariety of potentially toxic organic and inorganic contaminants.Road sediment from 13 locations in an urban (non-industrialized)drainage basin, and soil from 10 background (control) locationswere collected to assess total and labile fractions of Al, Co,Cu, Fe, Mn, Ni, Pb and Zn. Four digestions, of varying strength,were used to assess contaminant levels, these included: a totalfour-acid digestion, a microwave-assisted digestion withconcentrated nitric acid (USEPA Method 3051), a 0.5 M `cold' HCl,and a 0.05 M EDTA (pH 7). Road sediment data indicate that Al,Co, Fe, Mn and Ni were primarily lithogenic in origin, while Cu,Pb and Zn showed very significant anthropogenic signals, mostprobably from vehicle-related sources. Median Pb concentrationenrichment ratios for the EDTA extraction were about 42,indicating an extreme anthropogenic signal. The weak extractants(HCl and EDTA) are considered in this study to be superior intheir ability to characterize the degree of anthropogeniccontamination and should be utilized more widely in environmentalcontaminant studies.     

Mercury accumulation in fish species from the Persian Gulf and in human hair from fishermen

Total and methylmercury concentrations were assessed in muscle and liver of 141 fish samples from the northern part of the Persian Gulf. All fish samples belonged to five different species: grunt, flathead, greasy grouper, tiger-tooth croaker, and silver pomfret. In addition, Hg and methylmercury were analyzed in scalp hair of 19 fishermen living in the same coastal stations of the Persian Gulf and consuming several fish meals a week. Total mercury concentrations in fish muscle and liver ranged from 0.01 to 1.35 μg g^???1 w.w. and from 0.02 to 1.30 μg g^???1 w.w., respectively. In fish muscle, 3% of the Hg concentrations were higher than 0.5 μg g^???1 w.w., which corresponds to the maximum acceptable WHO level, while 9% were in the range of polluted fish (between 0.3 and 0.5 μg g^???1 w.w.). The highest mercury concentrations in fish muscle were observed in flathead fish at Abadan (average of 0.68 μ g g^???1 w.w.). Methylmercury fractions in fish muscle and liver amount to 34–99% (median 64%) and 24–70% (median 43%), respectively. The mean total Hg concentration in the fishermen’s scalp hair amounted to 2.9 ± 2.2 μ g g^???1, with 68% in the form of methylmercury. Ninety-five percent of the Hg levels in the fishermen’s hair were below 10 μ g g^???1, which is the WHO warning limit. In addition, relationships between the mercury levels in hair, on the one hand, and exposure-related factors such as Hg levels in specific fish species, regional differences, and number of fish meals, on the other hand, are discussed. It appears that a significant correlation for example exists between Hg levels human hair and fish muscle or human hair and age and that mean mercury levels in fish muscle and human hair decreased from western (Abadan) to eastern (Abbas port) coastal sites.     

Interspecific and geographical variations of trace metal concentrations in cephalopods from Tunisian waters

The concentrations of six metals (Ag, Cd, Cu, Hg, Pb, and Zn) were investigated and compared in three tissues (arms, digestive gland, and mantle) of three cephalopod species from the Tunisian waters: the common octopus (Octopus vulgaris), the common cuttlefish (Sepia officinalis), and the European squid (Loligo vulgaris). Whatever the species or the sites, the digestive gland displayed the highest concentrations of Ag, Cd, Cu, Pb, and Zn, highlighting its major role in their bioaccumulation and detoxification. This is also true for Hg but only for the digestive gland of O. vulgaris. Muscle from the arms and the mantle contained thus relatively low trace metal concentrations except for Hg in L. vulgaris and S. officinalis. Geographic comparison of metal concentrations in Tunisian cephalopods from three locations indicates that higher concentrations of Ag, Pb, and Hg were observed in cephalopods from northern and eastern coasts, whereas the highest Cd levels were detected in the southeastern, reflecting different conditions of exposure. Comparing the trace element concentrations between species, Ag, Cd, Cu, Hg, and Zn concentrations were the highest in the digestive gland of octopuses. This may be related to the differences in ecological features and swimming behavior among different cephalopod species. Effects of length and sex on metal levels were also considered, indicating a limited influence of sex on metal concentration.     

Modeling spatio-temporal wildfire ignition point patterns

We analyze and model the structure of spatio-temporal wildfire ignitions in the St. Johns River Water Management District in northeastern Florida. Previous studies, based on the K-function and an assumption of homogeneity, have shown that wildfire events occur in clusters. We revisit this analysis based on an inhomogeneous K-function and argue that clustering is less important than initially thought. We also use K-cross functions to study multitype point patterns, both under homogeneity and inhomogeneity assumptions, and reach similar conclusions as above regarding the amount of clustering. Of particular interest is our finding that prescribed burns seem not to reduce significantly the occurrence of wildfires in the current or subsequent year over this large geographical region. Finally, we describe various point pattern models for the location of wildfires and investigate their adequacy by means of recent residual diagnostics.

MSWI boiler fly ashes: magnetic separation for material recovery

Nowadays, ferrous materials are usually recovered from Municipal Solid Waste Incineration (MSWI) bottom ash by magnetic separation. To our knowledge, such a physical technique has not been applied so far to other MSWI residues. This study focuses thus on the applicability of magnetic separation on boiler fly ashes (BFA). Different types of magnet are used to extract the magnetic particles. We investigate the magnetic particle composition, as well as their leaching behaviour (EN 12457-1 leaching test). The magnetic particles present higher Cr, Fe, Mn and Ni concentration than the non-magnetic (NM) fraction. Magnetic separation does not improve the leachability of the NM fraction. To approximate industrial conditions, magnetic separation is also applied to BFA mixed with water by using a pilot. BFA magnetic separation is economically evaluated. This study globally shows that it is possible to extract some magnetic particles from MSWI boiler fly ashes. However, the magnetic particles only represent from 23 to 120 g/kg of the BFA and, though they are enriched in Fe, are composed of similar elements to the raw ashes. The industrial application of magnetic separation would only be profitable if large amounts of ashes were treated (more than 15 kt/y), and the process should be ideally completed by other recovery methods or advanced treatments.