Bioaccumulation of essential metals (Co,Mn and Zn) in the king scallop <Emphasis Type="Italic">Pecten maximus</Emphasis>: seawater,food and sediment exposures

In order to understand the bioaccumulation of essential metals in filter-feeding mollusks living in soft sediments, the uptake and depuration kinetics of three elements (Co, Mn and Zn) were investigated in the king scallop Pecten maximus exposed via seawater, food, or sediment, using radiotracer techniques. The scallops were collected in April 2005 in the Pertuis Breton, France and acclimated to laboratory conditions for 8 weeks prior to the experimental exposures. Dissolved metals were efficiently bioconcentrated with mean concentration factors (CFs) ranging from 65 (Co) to 94 (Mn) after 7 days of exposure. Feeding experiments using microalgae Skeletonema costatum (diatom) or Isochrysis galbana (flagellate) showed that metal assimilation efficiency (AE) and retention (T _b½) were strongly influenced by food source. For Co, AE was higher when ingested with I. galbana (29 vs. 4%), whereas Mn and Zn AE was higher for S. costatum (82 vs. 44% and 86 vs. 68%, respectively). Transfer factors (TFs) in P. maximus exposed to radiolabelled sediment were 3–4 orders of magnitude lower than CFs. Nevertheless, the fraction of sediment-bound metals that was taken up was efficiently absorbed in scallop tissues (>85%). Whatever the exposure pathway, metals were strongly retained in the kidneys of P. maximus. Due to poor determination of Mn biokinetics (and related parameters) in scallops exposed through sediment, the relative contribution of the three different pathways could be determined only for Co and Zn using a biodynamic model. The particulate pathway (i.e. food or sediment) appeared to be the main route for bioaccumulation of both metals in this scallop. In addition, even though P. maximus displayed different AEs for Co and Zn according to the food, results of the model were only slightly affected, if any, by change in the dietary parameters (AE and depuration rate constant, k _e).     

Is dew water potable? Chemical and biological analyses of dew water in Ajaccio (Corsica Island, France)

To determine to what extent dew water is potable without further treatment, a thorough set of chemical and biological analyses were performed on 10 samples of dew water collected on a large scale radiative collector (29.83 m2) in Ajaccio (Corsica Island, France), between 21 May 2002 and 5 Mar. 2003. Samples were collected following four protocols according to the dew volume amount and 48 parameters (ions, minerals, and bacteria) were analyzed and compared to French and European Union legislation and also World Health Organization (WHO) recommendations. Aluminum and Fe were the main pollutants whose concentrations were significantly larger than recommended. Their presence is due to local deposition of aerosols coming from the Sahara (a characteristic of the Mediterranean basin). A large number of biologically cultivable microorganisms were found, together with bacteria typical of fecal contamination. For dew water to be potable with respect to present legislation at the Ajaccio site, it should be disinfected and treated for turbidity.     

Evaluating the Environmental Performance of Urban Parks in Mediterranean Cities: An Example from the Barcelona Metropolitan Region

In a context of increasing urban sprawl and water scarcity common to other Mediterranean cities, this article focuses on the urban parks in the Region of Barcelona (Catalonia, Spain) to examine how these parks are distributed in this region and to assess whether their design and management follow criteria adapted to Mediterranean environmental conditions, especially in what concerns water use. In order to evaluate the environmental performance of these parks, we selected four factors possibly influencing the adoption of park management practices at the local scale: urban density, population size of the municipality, municipal income per capita, and political orientation of the city council. After determining the location and area of urban parks in the region, we correlated these four explanatory factors with several management tasks extracted from two different samples of parks (one of 315 parks and another of 125 parks) and a survey of 86 city councils. Results show that, in general, urban parks were more frequent in large, dense, and left/green municipalities but that environmentally sound practices were more common in small and low-density municipalities. We conclude that changes in certain practices (especially the substitution of high water demanding species) could improve significantly the environmental performance of public spaces in large urban areas with Mediterranean climates. Our observations may be pertinent for other cities interested in the provision of environmental public goods such as parks that necessitate water for irrigation.     

Abiotic transformation of estrogens in synthetic municipal wastewater: An alternative for treatment?

The abiotic transformation of estrogens, including estrone (E1), estradiol (E2), estriol (E3) and ethinylestradiol (EE2), in the presence of model vegetable matter was confirmed in this study. Batch experiments were performed to model the catalytic conversion of E1, E2, E3 and EE2 in synthetic wastewater. Greater than 80% reduction in the parent compounds was achieved for each target chemical after 72 h with the remaining concentration distributed between aqueous and solid phases as follows: 13% and 7% for E1, 10% and 2% for E2, 6% and 2% for E3, and 8% and 3% for EE2, respectively. Testosterone, androstenedione and progesterone were also monitored in this study, and their concentrations were found to be in agreement with initially spiked amount. Data collected under laboratory conditions provided the basis for implementing new abiotic wastewater treatment technologies that use inexpensive materials.     

Emission factors and exposures from ground-level pyrotechnics

Potential exposures from ground-level pyrotechnics were assessed by air monitoring and developing emission factors. Total particulate matter, copper and SO₂ exposures exceeded occupational health guidelines at two outdoor performances using consumer pyrotechnics. Al, Ba, B, Bi, Mg, Sr, Zn, and aldehyde levels were elevated, but did not pose a health hazard based on occupational standards. Emission factors for total particulate matter, metals, inorganic ions, aldehydes, and polyaromatic hydrocarbons (PAHs) were determined for seven ground-supported pyrotechnics through air sampling in an airtight room after combustion. Particle generation ranged from 5 to 13% of the combusted mass. Emission factors (g Kg^?1) for metals common to pyrotechnics were also high: K, 23–45; Mg, 1–7; Cu, 0.05–7; and Ba, 0.03–6. Pb emission rates of 1.6 and 2.7% of the combusted mass for two devices were noteworthy. A high correlation (r² ≥ 0.89) between metal concentrations in pyrotechnic compositions and emission factors were noted for Pb, Cr, Mg, Sb, and Bi, whereas low correlations (r² ≤ 0.1) were observed for Ba, Sr, Fe, and Zn. This may be due to the inherent heterogeneity of multi-effect pyrotechnics. The generation of inorganic nitrogen in both the particulate (NO₂^?, NO₃^?) and gaseous (NO, NO₂) forms varied widely (<0.1–1000 mg Kg^?1). Aldehyde emission factors varied by two orders of magnitude even though the carbon source was carbohydrates and charcoal for all devices: formaldehyde (<7.0–82 mg Kg^?1), acetaldehyde (43–210 mg Kg^?1), and acrolein (1.9–12 mg Kg^?1). Formation of lower molecular weight PAHs such as naphthalene and acenaphthylene were favored, with their emission factors being comparable to that from the combustion of household refuse and agricultural debris. Ba, Sr, Cu, and Pb had emission factors that could produce exposures exceeding occupational exposure guidelines. Sb and unalloyed Mg, which are banned from consumer fireworks in the US, were present in significant amounts.     

Comparison of arsenate and cadmium toxicity in a freshwater amphipod (Gammarus pulex)

Cadmium is largely documented on freshwater organisms while arsenic, especially arsenate, is rarely studied. The kinetic of the LC50s values for both metals was realized on Gammarus pulex. Physiological [i.e. metal concentration in body tissues, bioconcentration factor (BCF)] effects and behavioural responses (via pleopods beats) were investigated after 240-h exposure. Arsenate LC50 value was 100 fold higher than Cd-LC50 value after 240-h exposure, while concentrations in gammarids were similar for both metals at their respective LC50s. BCF decreased with increasing cadmium concentration while BCF remained stable with increasing arsenate concentration. Moreover, BCF was between 148 and 344 times lower for arsenate than cadmium. A significant hypoventilation was observed for cadmium concentrations exceeding or close to the 240h-LC50(Cd), while gammarids hyperventilated for the lowest arsenate concentrations and hypoventilated for the highest arsenate concentrations. We discussed the relationships between potential action mechanisms of these two metals and observed results.     

Biogeochemical dynamics of perfluorinated alkyl acids and sulfonates in the River Seine (Paris, France) under contrasting hydrological conditions

The biogeochemical dynamics of 15 perfluorinated compounds (PFCs) were investigated in a heavily urbanised river (River Seine, Paris, France). The target compounds included C4-C10 sulfonates and C5-C14 acids; eleven PFCs were detected and ∑PFCs ranged between 31 and 91 ng L⁻¹ (median: 47 ng L⁻¹). The molecular pattern was dominated by the perfluoroalkyl sulfonates PFHxS and PFOS (>54% of ∑PFCs), which were the only PFCs quantified in both the dissolved and particulate phases. For these PFCs, the sorbed fraction positively correlated with suspended sediment levels. Total PFC levels negatively correlated with river flow rate, which varied between 150 and 640 m³ s⁻¹. This suggests the predominance of point sources (likely WWTP effluent discharge), but a contribution of non-point sources such as combined sewer overflow could not be excluded. The annual PFC mass flow was estimated at 500 kg, which is less than observed for other large European rivers.     

Geostatistical Assessment of the Impact of World War I on the Spatial Occurrence of Soil Heavy Metals

Previous research showed a regional Cu enrichment of 6 mg kg⁻¹ in the top soil of the Ypres war zone (Belgium), caused by corrosion of WWI shell fragments. Further research was required since in addition to Cu, also As, Pb, and Zn were used during the manufacturing of ammunition. Therefore, an additional data collection was conducted in which the initial Cu data set was tripled to 731 data points and extended to eight heavy metals (As, Cd, Cr, Cu, Hg, Ni, Pb, and Zn) which permitted (1) to evaluate the environmental impact of the heavy metals at a regional scale and (2) to assess their regional spatial occurrence by performing an optimized geostatistical modeling. The results showed no pollution at a regional scale, but sometimes locally concentrations exceeded the soil sanitation threshold, especially for Cu, Pb, and Zn. The spatial patterns of Ni and Cr were related to variations in soil texture whereas the occurrences of Cu and Pb were clearly linked to WWI activities. This difference in spatial behavior was confirmed by an analysis of coregionalization.     

Environmental performance indicators: an empirical study of Canadian manufacturing firms

The aim of this exploratory study is to examine the importance of measurement and use of environmental performance indicators (EPIs) within manufacturing firms. Two research questions are investigated: (i) To what extent are firm characteristics associated with the importance of measurement of various categories of EPIs? (ii) To what extent are firm characteristics associated with global and specific uses of EPIs? More specifically, this paper examines four uses of EPIs (i.e. to monitor compliance, to motivate continuous improvement, to support decision making, and to provide data for external reporting) as well as four characteristics of firms, namely environmental strategy, International Organization for Standardization (ISO) 14001 compliance, size, and ownership. This study contributes to the environmental management accounting literature by collecting and analyzing empirical evidence that provides a better understanding of the associations among firm characteristics and EPIs.     

Chain-Length Shortening of Methyl Ethyl Hydroxyethyl Cellulose: An Evaluation of the Material Properties and Effect on Foaming Ability

During the past century, plastics have become a natural element in our every-day life. Lately however, an awareness about the fossil origin and often non-degradable nature of many plastics is rising. This has resulted in the emergence of some bio-based and/or biodegradable plastics, often produced from renewable resources. One possible candidate for bioplastics production could be found in cellulose. This paper aims at contributing information regarding a cellulose derivative, which could possibly be used in foamed plastics applications. Therefore, the reduction of the chain-length of a methyl ethyl hydroxyethyl cellulose (MEHEC), assessed by size exclusion chromatography, and the effect of chain-length on the foaming behaviour were studied. The foaming was accomplished with a hot-mould technique using aqueous polymer solutions. The generated steam was here used as the blowing agent and important parameters were polymer concentration and solution viscosity. The density of the produced foams was assessed and was in some cases comparable to that of commodity foams. It was found that reducing the chain-length enabled an increase of the initial polymer concentration for the foaming process. This is believed to be beneficial for creating more structurally stable foams of this type.