Sowing simulation tests of a pneumatic drill equipped with systems aimed at reducing the emission of abrasion dust from maize dressed seed

The utilization of dressed seed for spring sowing is a widespread practice to control some pests with reduced doses of chemical products. However some insecticides employed in maize seed dressing, namely belonging to the neonicotinoid family and fipronil, have been claimed to play a role in the decline of honeybees (Apis mellifera L.). Pneumatic drills used in maize sowing are charged with contributing to the dispersion of the abrasion dust produced by dressed seeds, favoring the contamination of the honeybee habitat. Different devices similar to air deflectors have been introduced on pneumatic drills in order to reduce dust drift. During previous field tests carried out by the authors during recent years reduction of dust concentration both in the air and at soil surface has been shown as a consequence of their application. As field tests are affected by the variability of environmental parameters (namely wind speed and direction) the results are not always reliable, comparable and of a general validity. This paper refers to a sowing simulation test system in which pneumatic drills can be tested at a fixed point under controlled conditions of the main environmental parameters. In the test area, protected by external influences, artificial wind conditions are created by means of a fan. The drill, suitably placed in the test area, operates the seed distribution "sur place" by means of an electric engine connected to the drill's driving wheel. A 22.5 m long sampling area, leeward with respect to the drill position, has been identified. Along the sampling area a series of Petri dishes has been placed, with the aim of capturing the depositing dust and providing the concentration of the active ingredients (a.i.) at ground level. At the same time, three air samplers with PTFE diskette filters have been used for the detection of the a.i. The test system has been used for the test of a pneumatic drill, equipped with and without air deflectors, using maize seed dressed with four a. i. (imidacloprid, clothianidin, thiametoxam, fipronil). The results showed regularly decreasing of the concentrations as distance increased, both in the air and at ground level. Moreover, the difference determined by the adoption of the drift reducing device (air deflectors) resulted clear and it can be quantified at around 50 % of the a.i. amounts observed without deflectors. Finally, the paper proposes a data processing method that, from the values observed at fixed point, provides the theoretical a.i. concentration behavior that would occur in field, under the same conditions of wind speed and direction and working speed. The obtained results are coherent with previous field test.     

Enhancement by anthraquinone-2-sulphonate of the photonitration of phenol by nitrite: implication for the photoproduction of nitrogen dioxide by coloured dissolved organic matter in surface waters

Anthraquinone-2-sulphonate (AQ2S) under UVA irradiation is able to oxidise nitrite to (·)NO(2) and to induce the nitration of phenol. The process involves the very fast reactions of the excited triplet state (3)AQ2S(*) and its 520-nm absorbing exciplex with water, at different time scales (ns and μs, respectively). Quinones are ubiquitous components of coloured dissolved organic matter (CDOM) in surface waters and AQ2S was adopted here as a proxy of CDOM. Using a recently developed model of surface-water photochemistry, we found that the oxidation of nitrite to (·)NO(2) by (3)CDOM(*) could be an important (·)NO(2) source in water bodies with high [NO(2)(-)] to [NO(3)(-)] ratio, for elevated values of column depth and NPOC.     

Analysing demand for environmental quality: a willingness to pay/accept study in the province of Siena (Italy)

The province of Siena, Italy, enacted a new garbage plan (NGP) with the objective of increasing separate waste collection (SWC), shutting down six landfills and increasing incineration. The aim of the paper is to evaluate costs and benefits of the NGP. The hypothesis is that willingness to pay (WTP) should reflect the value to the community of having better environmental quality, according to the Contingent Valuation literature. The paper reports the results of a contingent valuation (CV). The sample was divided into two subsets: firms and households. Through the information gathered via a detailed questionnaire, parametric and non-parametric estimates were elaborated to analyse the WTP of the population for the benefits flowing from increased SWC, increased incineration and shutting down of landfills. These values were expressed as a share of the tax actually paid. Although a small subset of firms and households valued increasing incineration less positively, requesting compensation, on the whole interviewees (with large differences between firms and households) had a net positive WTP for the provisions included in NGP. Parametric estimation procedures enabled us to analyse the economic as well as social and demographic factors affecting these results. These elements are useful for computing a value for the waste charge that also reflects external effects. Finally, we estimated household income elasticity of WTP for the increase in SWC and found less than one: environmental quality is not a luxury good.     

Effect of positional isomerism on the abiotic degradation of pesticides: Case of m- and p-imazamethabenz-methyl

The effect of positional isomerism on chemical and photochemical degradations of the Imazamethabenz-methyl (IMBM), a pesticide of the imidazolinone family, has been studied. IMBM is proposed in the form of a mixture of the two positional isomers: meta and para. The development of an effective HPLC method (resolution factor R=1.3) allows us to follow either the abiotic disappearance of the meta and para IMBM and the formation of their breakdown products. The abiotic degradation studies include the chemical hydrolysis, as well as the direct and the indirect photodecomposition. We used TiO(2), a well-known initiator of hydroxyl radicals, to highlight the role of *OH in the indirect photodegradation. This work confirms the different behaviours of positional isomers in the environment. Indeed the chemical or direct photochemical degradation is faster for the meta isomer than for the para. Whereas, concerning IMBM, there is not any prevalent influence of this type of isomerism on the indirect photochemical degradation. The degradation products were tentatively identified by LC-MS, NMR and IR and a degradation pathway was proposed.     

Perspectives on community health issues and the mining boom-bust cycle

The health of mining communities is becoming a priority for the mining industry, governments, and researchers. This paper describes an exploratory qualitative study into community health issues and mining activities (associated with the mining boom-bust cycle) from the perspective of health and social service providers in the northern Canadian coal mining community of Tumbler Ridge, British Columbia. Health and social service providers report on increases in pregnancies, sexually transmitted infections, and mine related injuries during booming mine activities. During bust times, mental health issues such as depression and anxiety were reported. Overarching community health issues prominent during both boom and bust periods include burdens to health and social services, family stress, violence towards women, and addiction issues. This paper concludes by providing recommendations as to how the industry can enhance community health made by this important stakeholder group.     

Multiple microbial activities for volatile organic compounds reduction by biofiltration

In the northeast of Italy, high volatile organic carbon (VOC) emissions originate from small-medium companies producing furniture. In these conditions it is difficult to propose a single, efficient, and economic system to reduce pollution. Among the various choices, the biofiltration method could be a good solution, because microbial populations possess multiple VOC degradation potentials used to oxidize these compounds to CO2. Starting from the air emissions of a typical industrial wood-painting plant, a series of experiments studied in vitro microbial degradation of each individual VOC. Isolated strains were then added to a laboratory-scale biofiltration apparatus filled with an organic matrix, and the different VOC behavior demonstrated the potential of single and/or synergic microbial removal actions. When a single substrate was fed, the removal efficiency of a Pseudomonas aeruginosa inoculated reactor was 1.1, 1.17, and 0.33 g m(-3) hr(-1), respectively, for xylene, toluene, and ethoxy propyl acetate. A VOC mixture composed of butyl acetate, ethyl acetate, diacetin alcohol, ethoxy propanol acetate, methyl ethyl ketone, methyl isobutyl ketone, toluene, and xylene was then fed into a 2-m(3) reactor treating 100 m3 hr(-1) of contaminated air. The reactor was filled with the same mixture of organic matrix, enriched with all of the isolated strains together. During reactor study, different VOC loading rates were used, and the behavior was evaluated continuously. After a short acclimation period, the removal efficiency was > 65% at VOC load of 150-200 g m(-3) hr(-1). Quantification of removal efficiencies and VOC speciation confirmed the relationship among removal efficiencies, compound biodegradability, and the dynamic transport of each mixture component within the organic matrix. Samples of the fixed bed were withdrawn at different intervals and the heterogeneous microbial community evaluated for both total and differential compound counts.     

Policies and regulations for Brazil’s artisanal gold mining sector: analysis and recommendations

In Brazil, artisanal and small-scale gold mining (ASGM) produces in the range of 6 tonnes of gold (Au) per annum, and employs approximately 200,000 people. Most of this mining activity is in the Amazon region, where miners have been extracting gold for more than 40 years. In the Tapajos River Basin, assessments indicate that around 99% of miners operate without the environmental and mining permits required by law. This is a result of a combination of unrealistic or lack of proper policies and regulations, lack of political will, lack of infra-structure to enforce the existing regulations and lack of incentives to miners to comply with legal requirements.In this article, we analyze a group of 20 laws, decrees and resolutions in Brazil, focusing on how idiosyncrasies in these regulations reveal gaps between policy and reality in ASGM areas. Artisanal miners operate in vast and remote areas and the government lacks the resources (personnel, vehicles, information and materials) to enforce the laws. Our analysis emphasizes the need for creating new government commitments and identifying priority areas where government agents can focus their efforts.There is no single solution for the environmental, health, technical and socio-economic problems associated with ASGM. However, a realistic approach should consider improving the level of education of miners, creating government programs to provide technical assistance in the field, simplifying administrative procedures and ensuring adequate measures for enforcement.     

Abandoned artisanal gold mines in the Brazilian Amazon: A legacy of mercury pollution

The modern gold rush in the Brazilian Amazon attracted millions of people to become artisanal miners in order to escape complete social marginalization. The rudimentary nature of artisanal mining activities often generates a legacy of extensive environmental degradation,both during operations and well after mining activities have ceased. One of the most significant environmental impacts is derived from the use of mercury (Hg), which is illegal for use in gold amalgamation in Brazil, but continues to be the preferred method employed by artisanal gold miners. The general population is unaware of the capricious nature of mercury and artisanal mining activities. Moreover, individuals in positions of political or economic infiuence tend to be negatively biased towards artisanal mining and government policies do not effectively address the realities of these activities. Affected communities have consequently been ignored,and mistrust towards outside parties is high. Not surprisingly, miners are suspicious of and unlikely to employ externally derived solutions to reduce mercury emissions. This article reviews the use of mercury in artisanal mining and highlights the role miners, governments and non-governmental organizations (NGOs) have played in communicating facts, perpetuating myths and deriving solutions for mercury pollution. This article also raises some key concerns that must be addressed to understand the behaviour of mercury in the environment and identifies solutions for problems facing communities where artisanal gold mining operations have been abandoned.     

Mercury balance in amalgamation in artisanal and small-scale gold mining: identifying strategies for reducing environmental pollution in Portovelo-Zaruma,Ecuador

The gold ore mined by artisanal and small-scale miners in Portovelo-Zaruma, Ecuador, is processed in custom mills. Miners can choose between Chilean-mill processing centers, where the ore is ground, concentrated and amalgamated, or “Chancha” Centers, where the whole ore is amalgamated. By weighing mercury before and after all unit operations involved in the amalgamation process, it was possible to determine mercury losses. Analyses in eight centers indicated that 51–59% of mercury introduced into the amalgamation process is recovered when miners squeeze the excess mercury. Around 29% of total mercury is lost when miners burn amalgam and gold is melted, and 15% is lost with the tailings. When only gravity concentrates are amalgamated, 1.4% of mercury entering the process is lost with tailings, whereas 29.5% is lost when the whole ore is amalgamated. Approximately 1.5 tonnes/annum of mercury is released in Portovelo-Zaruma, from which 70% is evaporated and 30% is released with tailings. Mercury-contaminated tailings are leached with cyanide in agitated tanks. A large majority of the processing centers dispose the final tailings with mercury and cyanide into the Calera River and Amarillo River. Mercury dissolved with cyanide likely becomes more bioavailable than metallic mercury. A campaign for reducing mercury emissions must focus on the use of individual retorts – mercury pollution control devices – and the elimination of whole ore amalgamation.