Acute toxicity of disinfection by-products from chlorination of algal organic matter to the cladocerans Ceriodaphnia silvestrii and Daphnia similis: influence of bromide and quenching agent

Environmental Science and Pollution Research - Algal organic matter (AOM) in water reservoirs is a worldwide concern for drinking water treatment; once it is one of the main precursors for...     

Trends in Fenton and photo-Fenton processes for degradation of antineoplastic agents in water matrices: current knowledge and future challenges evaluation using a bibliometric and systematic analysis

Environmental Science and Pollution Research - Antineoplastic agents present potential hazards to human health and the environment. For this reason, these compounds have attracted a great deal of...     

A model for estimation of potential generation of waste electrical and electronic equipment in Brazil

Sales of electrical and electronic equipment are increasing dramatically in developing countries. Usually, there are no reliable data about quantities of the waste generated. A new law for solid waste management was enacted in Brazil in 2010, and the infrastructure to treat this waste must be planned, considering the volumes of the different types of electrical and electronic equipment generated.This paper reviews the literature regarding estimation of waste electrical and electronic equipment (WEEE), focusing on developing countries, particularly in Latin America. It briefly describes the current WEEE system in Brazil and presents an updated estimate of generation of WEEE. Considering the limited available data in Brazil, a model for WEEE generation estimation is proposed in which different methods are used for mature and non-mature market products.The results showed that the most important variable is the equipment lifetime, which requires a thorough understanding of consumer behavior to estimate. Since Brazil is a rapidly expanding market, the “boom” in waste generation is still to come. In the near future, better data will provide more reliable estimation of waste generation and a clearer interpretation of the lifetime variable throughout the years.     

Vegetable fibres from agricultural residues as thermo-mechanical reinforcement in recycled polypropylene-based green foams

Novel lightweight composite foams based on recycled polypropylene reinforced with cellulosic fibres obtained from agricultural residues were prepared and characterized. These composites, initially prepared by melt-mixing recycled polypropylene with variable fibre concentrations (10-25 wt.%), were foamed by high-pressure CO₂ dissolution, a clean process which avoids the use of chemical blowing agents. With the aim of studying the influence of the fibre characteristics on the resultant foams, two chemical treatments were applied to the barley straw in order to increase the α-cellulose content of the fibres. The chemical composition, morphology and thermal stability of the fibres and composites were analyzed. Results indicate that fibre chemical treatment and later foaming of the composites resulted in foams with characteristic closed-cell microcellular structures, their specific storage modulus significantly increasing due to the higher stiffness of the fibres. The addition of the fibres also resulted in an increase in the glass transition temperature of PP in both the solid composites and more significantly in the foams.     

Dissipation of DDT in a heavily contaminated soil in Mato Grosso, Brazil

After the prohibition of organochlorine-pesticide use in Brazil for controlling insect vector diseases, Mato Grosso State gathered the exceeding DDT and stored it irregularly in an open air area that belongs to the National Health Foundation, causing soil contamination. This study aimed to evaluate the contamination level and dissipation of p,p'-DDT and p,p'-DDE in this area. For that, surface soil samples were collected on 19 September 2000, 15 December 2000, 4 April 2001 and soil samples 30-40 cm; 60-70 cm and 90-100 cm deep were taken from five points in the studied area on 17 July 2001. The contaminants were determined by a small scale method which consists on extraction and clean-up steps combined into one step by transferring soil samples mixed with neutral alumina to a chromatographic column prepacked with neutral alumina and elution with hexane:dichloromethane (7:3 v:v). The eluate was concentrated and the analytes were quantified by gas chromatography with an electron-capture detector. p,p'-DDT at surface soil ranged from 3,800 to 7,300 mg kg(-1). 30-40 cm deep soil sample concentrations varied from 0.036 to 440 mg kg(-1) while 90-100 cm deep samples varied from 0.069 to 180 mg kg(-1). Volatilization is probably the main dissipation process. The p,p'-DDT is moving slowly downward in the soil profile, however, the levels of this contaminant are high enough to present risk to underground waters.     

Ontogenetic data and the evolutionary origin of the mammalian scapula

One of the most useful diagnostic therian features is the division of the lateral surface of the scapula into two fossae separated by a scapular spine. A new model to describe this evolutionary innovation based on ontogenetic data is provided, consistent with information provided by recent fossil discoveries. The development of the scapula in three didelphid and one dasyurid marsupials using histological sections was studied. Only the ventral, acromial portion of the scapular spine, which originates from the anterior margin of the scapular blade, is preformed in cartilage. The major dorsal portion is formed at a later stage by appositional bone, which expands from the perichondral ossification of the scapula into an intermuscular aponeurosis between the supra-and infraspinatus muscles. This intermuscular aponeurosis inserts more or less in the middle of the lateral surface of the developing scapula. Thus, the floor of the supraspinous fossa is already present at the beginning of scapular development, simultaneous with the infraspinous fossa. The portion of the scapular spine that is situated dorsal to the acromial process is hypothesized to be a neomorphic structure of therians. The dorsal portion of the scapular spine evolved as additional attachment for powerful supraspinatus and infraspinatus muscles meeting near the middle of the lateral scapula.     

Alternative herbicides to manage Italian ryegrass (Lolium multiflorum lam) resistant to glyphosate at different phenological stages

During the growing season of 2002--2003, field and greenhouse experiments were conducted with the objective of evaluating the influence of Italian ryegrass phenological stages and management alternatives on the control of resistant biotypes to glyphosate. Three field experiments were conducted in Lagoa Vermelha, RS, Brazil and glyphosate was applied alone and in combinations with alternative herbicides. Two greenhouse experiments were also conducted at the Department of Crop Science, ESALQ/USP, Piracicaba, SP, Brazil. The Italian ryegrass resistant population was collected from Lagoa Vermelha, RS, Brazil. From the results it was possible to conclude that: (i) the more advanced the phenological stage of application, the more difficult the control of resistant Italian ryegrass by glyphosate, mainly by the rate of 960 g a.i. ha(-1); however, this rate applied at earlier phenological stage (five tillers), the control was higher than 90%; (ii) with the increment of glyphosate rate, it significant response was observed on the control at all stages of application; (iii) the mixture of glyphosate + clethodim (1440 + 72 g a.i. ha(-1)), paraquat + diuron (500 + 250 g a.i. ha(-1)), at all stages of application and clethodim (96 g a.i. ha(-1)) and paraquat + diuron (300 + 150 g a.i. ha(-1)) at the initial stages until pre-flowering were excellent alternatives for management of these populations; and (iv) the response of control was much faster for the mixture of glyphosate + clethodim, independently of growth stage.     

Effects of herbicide and insecticide interaction on soil entomofauna under maize crop

The aim of this study was to evaluate the impact of the herbicide mixture nicosulfuron + atrazine, with or without the insecticide chlorpyrifos, onto soil entomofauna under maize crop. The treatments, applied 25 days after maize emergence, were represented by a weeded control without insecticide and herbicide, a weeded control with chlorpyrifos, and mixtures of nicosulfuron + atrazine, with or without chlorpyrifos. Arthropods populations, on the soil surface, as well as inside the soil under maize, were principally represented by mites (Arachnida: Acari), decomposer collembolans (Hexapoda:Parainsecta:Collembola) and predator ants (Hymenoptera:Formicidae). The nicosulfuron + atrazine mixture with chlorpyrifos and the isolated chlorpyrifos reduced the population dynamics of all insect groups on the soil surface compared to the weeded control. In the soil, mite and ant populations were reduced after application of the herbicide mixture with chlorpyrifos and of the isolated chlorpyrifos.     

Allelopathic potential and systematic evaluation of organic extracts from Canavalia ensiformis leaves (Jack beans)

This article describes the assessment of possible allelopathic potential of organic extracts obtained from leaves of Canavalia ensiformis under laboratory conditions. Furthermore, a systematic evaluation of these extracts was carried out using specific protocols developed in capillary electrophoresis (CE) to determine some groups of secondary metabolites. After the identification and quantification of compounds, the effects of compounds on germination of some common weeds was investigated, which are becoming a real problem in pastures in the state of Pará, Brazil.     

Shell-size selection by intertidal sympatric hermit crabs

This study evaluated selection for shell size by three species of tropical intertidal hermit crabs, Clibanarius antillensis, C. sclopetarius, and C. vittatus, from species of shells which are frequently used in nature. Crab size and weight were strongly and significantly related to all measured parameters of the selected shells. The strength of these relationships (r² values) depended neither on the crab nor on the shell variables taken into account. The relationships between crab size and the dimensions of the selected shells showed higher r² values than the corresponding relationships with the shells that the crabs had occupied when they were collected (0.482–0.903 in comparison to 0.091–0.652, respectively), indicating that the crabs were occupying sub-optimal shells in nature. Negative allometry was frequently found in the relationships between crab and shell variables, indicating that large crabs select and use proportionally lighter shells than do small crabs. This negative allometry was stronger for the shells used in nature (except for C. antillensis), i.e. larger crabs tended to select heavier shells in the laboratory than in nature. Different allometric relationships were also recorded among the dimensions of shells used in nature and those selected by the hermit crabs in free-access experiments: as shell length increased, the selected shells were heavier and had larger apertures than the shells used in nature. The relationships between crab size and the length and weight of the selected shells did not depend on the species of crab or species of shell, but only on crab size. Therefore, analyses using these variables can be performed without taking the species of crab or shell into account, i.e. data from different crab or shell species can be pooled. The influence of crab and/or shell species was recorded only in the models fitted for aperture length and width, variables which were more related to shell architecture than did shell length or weight. In contrast, if crab weight is used as an independent variable, different crab or shell species can be analyzed together independently of the particular shell parameter. This indicates that crab weight may be less susceptible than crab shield length to shell morphological constraints. Finally, the results indicate that the preferred size of a given shell type chosen by a given hermit crab will depend more on crab size or weight, than on the crab or shell species under consideration, i.e. crab shell-size relationships are not species specific.Communicated by P.W. Sammarco, Chauvin