Biodegradation of organic micropollutants is likely to occur due to cometabolism by particular microbial groups. In an effort to identify the stages of anaerobic digestion potentially involved in the biodegradation of the veterinary antimicrobial sulfamethazine (SMZ), the influence of selected carbon sources (sucrose, glucose, fructose, ethanol, meat extract, cellulose, soluble starch, soy oil, acetic acid, propionic acid and butyric acid) on SMZ removal by anaerobic sludge was evaluated in short-term batch experiments. Adsorption to the granular sludge constituted a significant removal mechanism, accounting for 39% of SMZ removal in control experiments. The presence of glucose, fructose, sucrose and meat extract exerted an inducing effect on SMZ degradation, resulting in removal efficiencies of 54, 53, 58 and 61%, respectively, indicating the occurrence of cometabolism. Time courses of sucrose and meat extract degradation revealed markedly distinct organic acid profiles but resulted in similar SMZ removals. Temporal profiles of acetic and propionic acid degradation were not associated with SMZ removal, as changes in SMZ concentration were observed even after the organic acids had been completely removed. The experimental results suggest that SMZ cometabolism is not associated to sucrose hydrolysis, acetoclastic methanogenesis and acetogenesis from propionic acid. 相似文献
Environmental Science and Pollution Research - The removal of Cr3+ from water solutions by biosorbents from the rind, endosperm, and endosperm + episperm of the Jatropha curcas was evaluated.... 相似文献
The intent of this research is to investigate how the customers of a technological control laboratory for civil construction materials perceived the quality of the services delivered by the lab, specifically in regard to the service of concrete compression testing. The popular SERVQUAL scale, a multidimensional instrument used to capture customer expectations and perceptions, was used as a model for the application of a survey. Exploratory factor analyses were employed to evaluate customers’ perceptions and experiences of service quality in regard to the dimensions and accompanying attributes of the SERVQUAL scale. Twenty attributes, which were grouped within five dimensions (Reliability, Assurance, Tangibles, Responsiveness, and Empathy), were identified, explaining 80.417% of the variance between customer expectations and perceptions and characterizing these dimensions on a modified SERVQUAL scale. Analysis of the results allowed us to identify discrepancies in perceived service quality compared with customers’ expectations. Most of the identified gaps between expectations and perceptions resulted in negative values. 相似文献
The purpose of this article is to analyze the challenges to, and opportunities for, increasing sustainable development (SD) co-benefits delivered by clean development mechanism (CDM) wind power projects in northeastern Brazil and the resulting implications for climate and energy policies. Five methodological phases were met: First, a documentary research was conducted in the main CDM database; second was a literature review, creating the analytical framework and a survey questionnaire needed to assess the SD co-benefits from the projects; third, documentary research was used to enable ex-ante analysis of the SD co-benefits proposed in the CDM Project Design Documents (PDDs); fourth, survey allowed for the analysis of SD co-benefits perceived by project entrepreneurs (ex-post analysis); and finally, a comparison between the ex-ante and ex-post analyses was completed. The results show the importance of carrying out SD co-benefit studies after the implementation of CDM projects in order to learn lessons for new mechanisms of climate governance. The lowest SD co-benefits were water management improvement in the project influence area, soil pollution prevention, health and safety improvements and technology transfer. The greatest opportunities for increasing SD co-benefits come from the environmental licensing process and the strengthening of Corporate Social Responsibility. The greatest challenges are new technology development, stakeholders’ engagement and SD co-benefit audits. We conclude that the improvement of multi-level climate and energy governance plays a key role in increasing SD co-benefits.
This article introduces a method for assessing health and safety management systems (MAHS) that has two innovative characteristics: (a) it brings together the three main auditing approaches to health and safety (HS) – the structural approach (which assesses the system prescribed), the operational approach (which assesses what is really happening on the shop-floor) and the performance approach (which assesses the results of performance indicators); (b) it emphasizes the resilience engineering perspective on HS, which takes into consideration four major principles (flexibility, learning, awareness, and top management commitment). Such principles underlie seven major assessment criteria, which in turn are divided into items (e.g. hazard identification from a resilience perspective is an item that belongs to the criteria of production processes). The items are sub-divided into statements, which are the requirements that should be assessed based on interviews, analysis of documents and direct observations. Within the 112 requirements proposed, 38 of them have clear links with at least one out of the four resilience engineering principles adopted. The remaining requirements are based on traditional assumptions underlying the so-called best practices of HS management. The results of the assessment for each item are expressed by a score on a scale of compliance with the established requirements, ranging from 0% to 100%. The specific score within that scale is obtained from tables used to assess applications for the Brazilian national quality award. The MAHS was tested in a case study that was carried out in a factory that manufactures automobile exhaust systems, located in Brazil. 相似文献
The effect of flow type and rotor speed was investigated in a round-bottom reactor with 5 L useful volume containing 2.0 L of granular biomass. The reactor treated 2.0 L of synthetic wastewater with a concentration of 800 mgCOD/L in 8-h cycles at 30 degrees C. Five impellers, commonly used in biological processes, have been employed to this end, namely: a turbine and a paddle impeller with six-vertical-flat-blades, a turbine and a paddle impeller with six-45 degrees -inclined-flat-blades and a three-blade-helix impeller. Results showed that altering impeller type and rotor speed did not significantly affect system stability and performance. Average organic matter removal efficiency was about 84% for filtered samples, total volatile acids concentration was below 20 mgHAc/L and bicarbonate alkalinity a little less than 400 mgCaCO3/L for most of the investigated conditions. However, analysis of the first-order kinetic model constants showed that alteration in rotor speed resulted in an increase in the values of the kinetic constants (for instance, from 0.57 h(-1) at 50 rpm to 0.84 h(-1) at 75 rpm when the paddle impeller with six-45 degrees -inclined-flat-blades was used) and that axial flow in mechanically stirred reactors is preferable over radial-flow when the vertical-flat-blade impeller is compared to the inclined-flat-blade impeller (for instance at 75 rpm, from 0.52 h(-1) with the six-flat-blade-paddle impeller to 0.84 h(-1) with the six-45 degrees -inclined-flat-blade-paddle impeller), demonstrating that there is a rotor speed and an impeller type that maximize solid-liquid mass transfer in the reaction medium. Furthermore, power consumption studies in this reduced reactor volume showed that no high power transfer is required to improve mass transfer (less than 0.6 kW/10(3)m3). 相似文献
The objective of this work was to study the technological feasibility of treating wastewater from a personal care industry (PCI-WW) in a mechanically stirred anaerobic sequencing batch biofilm reactor (AnSBBR) containing immobilized biomass on polyurethane foam. An assessment was made on how system efficiency and stability would be affected by: increasing organic load; supplementation of nutrients and alkalinity; and different feed strategies. The AnSBBR operated with 8-h cycles, stirring speed of 400 rpm, temperature of 30 °C, and treated with 2.0 L wastewater per cycle. First the efficiency and stability of the AnSBBR were studied when submitted to an organic loading rate (OLR) of 3.1–9.4 gCOD/(L d), and when the PCI-WW was supplemented with nutrients (sucrose, urea, trace metals) and alkalinity. The AnSBBR was shown to be robust and presented stability and removal efficiency exceeding 90%. At an OLR of 12.0 gCOD/(L d) efficiency became difficult to maintain due to the presence of commercial cleansers and disinfectants in the wastewater lots. In a subsequent stage the AnSBBR treated the wastewater supplemented with alkalinity, but with no nutrients at varying feed strategies and maintaining an OLR of approximately 9.0 gCOD/(L d). The first strategy consists of feeding 2.0 L of the influent batchwise [OLR of 9.4 gCOD/(L d)]. In the second 1.0 L of influent was fed-batchwise and an additional 1.0 L was fed fed-batchwise [OLR of 9.2 gCOD/(L d)], i.e., in relation to the first strategy the feed volume was maintained but supplied in different periods. In the third strategy 1.0 L of treated effluent was maintained in the reactor and 1.0 L of influent was fed fed-batchwise [OLR of 9.0 gCOD/(L d)], i.e., in relation to the first strategy the feed volume was different but the feed period was the same and the OLR was maintained by increasing the influent concentration. Comparison of the first and second strategies revealed that organic matter removal efficiency was unaffected (exceeding 90%). The third strategy resulted in a reduction in average removal efficiency from 91 to 83% when compared to the first one. A kinetic study resulted in first order kinetic parameters ranges from 0.42 to 1.46 h−1 at OLRs from 3.1 to 12.0 gCOD/(L d), respectively, and the second feed strategy [OLR of 9.2 gCOD/(L d)] was shown to be the most favorable. 相似文献
Fifty seven samples of Mytilus galloprovincialis (Lamarck, 1819) collected along the breakwater barriers of Fano (station 1) and Pesaro (station 2), Adriatic Sea, Marche
Region, central Italy, were analyzed by atomic absorption spectrometry and Cd, Cu, Pb and Zn concentrations in the soft tissues
were measured. The aims of this work were the statistical analysis of Cd-weight, Cu-weight, Pb-weight, Zn-weight relationships,
and the building of a tendency function that allows assessing with a good approximation the concentrations of a metal in different
weight organisms. In Mytilus galloprovincialis the content of Cd proportionally grew with the weight and therefore its concentration was independent from this factor; while
the concentration of Pb decreased as the weight increased. In both cases the accuracy of multiple regression models improved
considering the variable ‘site’, while the same approach appeared not reliable for Cu and Zn, that were two essential metals.
Our results showed that a tendency function was reliable, solid and able to predict to a very satisfying extent the concentration
of non-physiological metals, like Cd and Pb; while it did not show a good approximation with real Cu and Zn contents. 相似文献
The present work investigated the direct and indirect photolysis of pesticide residues (atrazine, imazaquin, iprodione), in aqueous solutions and under UV-visible radiation (280-480nm). Different kinds of humic substances (HS) were added to samples in order to evaluate their behaviour as possible photocatalysts and their effect on the photolysis of pesticides. The fulvic acids were purchased from the International Humic Substances Society, and they were added to samples in concentrations ranging from 1 to 150 mgl(-1). Titanium dioxide was used as the photocatalyst, in concentration ranging from 10 to 150 mgl(-1). Pesticides photolysis were measured by UV-visible absorption spectroscopy and differential pulse polarography with all used pesticides, reaching total degradation after 2h of irradiation, thus indicating a fast direct photolysis. Photocatalysis by TiO(2) could increase the pesticides photolysis rate up to 40%. This effect, however, was not observed for imazaquin photolysis. Again, except for imazaquin, HS presence showed a positive effect in increasing pesticide degradation, but only within specific concentration ranges (below 10mg l(-1) for iprodione and about 30mgl(-1) for atrazine). Above these ranges HS induce a decrease in the pesticides photolysis rate. Spin-trapping measurements by electronic paramagnetic resonance spectroscopy, using the spin-trap DMPO, showed that HS are able to photogenerate hydroxyl radicals, increasing the pesticides molecule degradation. However, the HS also react with the photogenerated hydroxyl radical, influencing the pesticide photolysis, leading to a decrease in the photolysis rate and causing it to be strongly dependent on the nature and concentration of residues in the water to be treated. 相似文献
In many countries, such as Brazil, Colombia, Ecuador, Indonesia, Venezuela and Zimbabwe, amalgamated tailings are leached with cyanide to recover remaining gold. This paper describes a recently completed study conducted at seven gold processing centers in Portovelo-Zaruma, Southern Ecuador, which involved consultation with local miners. The objective of the study was to understand the behaviour of mercury (with a focus on mercury loss) in artisanal gold mining operations through the evaluation of two cyanidation processes (Merrill-Crowe and Carbon-in-pulp), using a participatory approach. In order to assess the kinetics of mercury dissolution in cyanide, a bottle roll test was conducted in the laboratory. In the Merrill-Crowe cyanidation process, an average of 24.2% of metallic mercury was determined to be trapped at the bottom of the agitation tanks; 33.1% of mercury is lost in association with solid material and 11.7% is lost in solution. Approximately 31.0% of mercury in solution is sent to the zinc precipitation cells from which 27.8% is precipitated on the zinc shavings, with 3.23% remaining in solution. The mercury precipitated on to the zinc is lost to the atmosphere when the shavings are burned at 900 °C. In the Carbon-in-pulp (CIP) leaching system, 11.2% of the mercury is lost with the solid tailings; 31.6% of the mercury is associated with fine particles in suspension and 50.8% is likely dissolved. About 2.68% is trapped at the bottom of the tank and 3.72% is absorbed by the activated carbon. The bottle roll test revealed that mercury dissolution is directly proportional to cyanide concentration. At 10 g/ton of cyanide, approximately 42% of mercury was leached, whereas all gold was solubilized. During this study, miners recognized the risk associated with the cyanidation of mercury-rich tailings, and were aware of how much mercury is discharged to local streams and to the atmosphere. The active participation of miners in this study has led to the strengthening of their knowledge and awareness of mercury contamination, and has enhanced their understanding of the nature of the problem, as well as the weaknesses and strengths of the system they operate. 相似文献