Assessment of natural or enhanced in situ bioremediation at a chlorinated solvent-contaminated aquifer in Italy: a microcosm study

A microcosm study was used to assess the potential for in situ natural or enhanced bioremediation at a chloroethane- (i.e., tetrachloroethane, TeCA) and chloroethene-contaminated (i.e., tetrachloroethene, PCE; trichloroethene, TCE) groundwater in Northern Italy. All the live microcosms were positive for dechlorination, indicating the presence of an active native dechlorinating population in the subsurface. All the tested electron donors (i.e., yeast extract, lactate, butyrate, hydrogen) promoted enhanced dechlorination of chlorinated contaminants. Lactate- and butyrate-amended microcosms performed the best, and also dechlorinated the solvents past cis-dichloroethene (cis-DCE). The microcosm bioaugmented with a PCE-dechlorinating mixed culture containing Dehalococcoides spp. dechlorinated groundwater contaminants to DCE, vinyl chloride (VC), and ethene (ETH). In conclusion, results from this microcosm study indicate the potential for enhancing full dechlorination at the contaminated site, through a proper addition of a suitable electron donor (e.g., lactate or butyrate) and/or through bioaugmentation with a Dehalococcoides-containing culture.     

The benefits of flue gas recirculation in waste incineration

Flue gas recirculation in the incinerator combustion chamber is an operative technique that offers substantial benefits in managing waste incineration. The advantages that can be obtained are both economic and environmental and are determined by the low flow rate of fumes actually emitted if compared to the flue gas released when recirculation is not conducted. Simulations of two incineration processes, with and without flue gas recirculation, have been carried out by using a commercial flowsheeting simulator. The results of the simulations demonstrate that, from an economic point of view, the proposed technique permits a greater level of energy recovery (up to +3%) and, at the same time, lower investment costs as far as the equipment and machinery constituting the air pollution control section of the plant are concerned. At equal treatment system efficiencies, the environmental benefits stem from the decrease in the emission of atmospheric pollutants. Throughout the paper reference is made to the EC legislation in the field of environmental protection, thus ensuring the general validity in the EU of the foundations laid and conclusions drawn henceforth. A numerical example concerning mercury emission quantifies the reported considerations and illustrates that flue gas recirculation reduces emission of this pollutant by 50%.     

Raw sugarcane bagasse as carbon source for xylanase production by Paenibacillus species: a potential degrader of agricultural wastes

Environmental Science and Pollution Research - Paenibacillus species isolated from a variety of natural sources have shown to be important glycoside hydrolases producers. These enzymes play a key...     

Real-world emissions of in-use off-road vehicles in Mexico

Off-road vehicles used in construction and agricultural activities can contribute substantially to emissions of gaseous pollutants and can be a major source of submicrometer carbonaceous particles in many parts of the world. However, there have been relatively few efforts in quantifying the emission factors (EFs) and for estimating the potential emission reduction benefits using emission control technologies for these vehicles. This study characterized the black carbon (BC) component of particulate matter and NOx, CO, and CO₂ EFs of selected diesel-powered off-road mobile sources in Mexico under real-world operating conditions using on-board portable emissions measurements systems (PEMS). The vehicles sampled included two backhoes, one tractor, a crane, an excavator, two front loaders, two bulldozers, an air compressor, and a power generator used in the construction and agricultural activities. For a selected number of these vehicles the emissions were further characterized with wall-flow diesel particle filters (DPFs) and partial-flow DPFs (p-DPFs) installed. Fuel-based EFs presented less variability than time-based emission rates, particularly for the BC. Average baseline EFs in working conditions for BC, NOx, and CO ranged from 0.04 to 5.7, from 12.6 to 81.8, and from 7.9 to 285.7 g/kg-fuel, respectively, and a high dependency by operation mode and by vehicle type was observed. Measurement-base frequency distributions of EFs by operation mode are proposed as an alternative method for characterizing the variability of off-road vehicles emissions under real-world conditions. Mass-based reductions for black carbon EFs were substantially large (above 99%) when DPFs were installed and the vehicles were idling, and the reductions were moderate (in the 20–60% range) for p-DPFs in working operating conditions. The observed high variability in measured EFs also indicates the need for detailed vehicle operation data for accurately estimating emissions from off-road vehicles in emissions inventories.

Implications: Measurements of off-road vehicles used in construction and agricultural activities in Mexico using on-board portable emissions measurements systems (PEMS) showed that these vehicles can be major sources of black carbon and NO_X. Emission factors varied significantly under real-world operating conditions, suggesting the need for detailed vehicle operation data for accurately estimating emissions inventories. Tests conducted in a selected number of sampled vehicles indicated that diesel particle filters (DPFs) are an effective technology for control of diesel particulate emissions and can provide potentially large emissions reduction in Mexico if widely implemented.     

Chemical composition and surfactant characteristics of marine foams investigated by means of UV-vis,FTIR and FTNIR spectroscopy

In this study, we collected the ultraviolet–visible (UV-vis), Fourier transform infrared (FTIR) and Fourier transform near-infrared (FTNIR) spectra of marine foams from different sites and foams produced by marine living organisms (i.e. algae and molluscs) to retrieve information about their molecular and structural composition. UV-vis spectra gave information concerning the lipid and pigment contents of foams. FTIR spectroscopy gave a more detailed qualitative information regarding carbohydrates, lipids and proteins in addition with information about the mineral contents of foams. FTNIR spectra confirmed the presence of carbohydrates, lipids and proteins in foams. Then, due to the higher content of structural information of FTIR spectroscopy with respect to FTNIR and UV-vis, we join the FTIR spectra of marine foams to those of humic substance from marine sediments and to the spectra of foams obtained by living organisms. We submitted this resulting FTIR spectral dataset to statistical multivariate methods to investigate specific aspects of foams such as structural similarity among foams and in addition, contributions from the organic matter of living organisms. Cluster analysis (CA) evidenced several cases (i.e. clusters) of marine foams having high structural similarity with foams from vegetal and animal samples and with humic substance extracted from sediments. These results suggested that all the living organisms of the marine environment can give contributions to the chemical composition of foams. Moreover, as CA also evidenced cases of structural differences within foam samples, we applied two-dimensional correlation analysis (2DCORR) to the FTIR spectra of marine foams to investigate the molecular characteristics which caused these structural differences. Asynchronous spectra of two-dimensional correlation analysis showed that the structural heterogeneity among foam samples depended reasonably on the presence and on the qualitative difference of electrostatic (hydrogen bonds) and nonpolar (van der Waals and π–π) interactions involving carbohydrate proteins and lipids present. The presence and relevance of these interactions agree with the supramolecular and surfactant characteristics of marine organic matter described in the scientific literature.     

Financial liability for environmental damage: insurance market in Italy,focus on Veneto region experience

Environmental Science and Pollution Research - Making good environmental damage caused by industrial accidents and restoring impaired ecosystems may be associated with high costs. The European...     

Ecotoxicological effects of sediments from Mar Piccolo,South Italy: toxicity testing with organisms from different trophic levels

The Mar Piccolo of Taranto (Ionian Sea, Southern Italy) is a semi-enclosed and strongly polluted basin. For decades, it has been subjected to different anthropogenic impacts. These stressors caused severe sediments contamination with high concentration of different pollutants (PAHs, PCB, heavy metals). In order to assess the current status of sediments contamination, an ecotoxicological investigation combined with chemical analysis (heavy metals, PAH, and PCB) has been performed. In order to derive ecologically relevant conclusions, a multiorganisms and multiend-points approach has been applied, exposing organisms from different trophic levels to elutriate and whole sediment. The battery of bioassays consists of a microalgal growth inhibition test (Dunaliella tertiolecta), acute and sublethal assays (end-points: mortality, immobilization and swimming speed alteration) on crustaceans larvae and juveniles, and rotifers (Amphibalanus amphitrite, Artemia salina, Corophium insidiosum and Brachionus plicatilis), and embryotoxicity test on echinoderms (Paracentrotus lividus). Considering the high levels of sediment contamination highlighted from chemical analysis, an unexpected very low toxic effect was observed, even considering the sublethal end-point (larval swimming speed alteration). The results of this study suggest a very complex contaminants dynamic in the Mar Piccolo sediments that, despite a strong level of contamination, seems to not affect in a proportional manner the biological compartment.     

Dioxins (polychlorinated dibenzo-p-dioxins and polychlorinated dibenzo-furans) in traditional clay products used during pregnancy

Geophagy, the practice of consuming clay or soil, is encountered among pregnant women in Africa, Eastern Asia and Latin America, but also in Western societies. However, certain types of clay are known to contain high concentrations of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs). The aim of this study was to determine the PCDD/F contents of orally consumed clays purchased from Dutch and African markets. Congener patterns were compared with those of pooled human milk samples collected in eight African countries, to investigate a possible relationship with clay consumption. From the Dutch market thirteen clay products were examined, seven of African and six of Suriname origin. From seven African countries, twenty clay products were collected. All 33 clay products were screened with a cell-based bioassay and those showing a high response were analyzed by GC/HRMS. High PCDD/F concentrations were measured in three clay products from the Dutch market, ranging from 66 to 103 pg TEQ g^-1, whereas clay products from African countries were from 24 to 75 pg TEQ g^-1. Patterns and relatively high concentrations of PCDD/Fs in human milk samples from the Democratic Republic of the Congo and Côte d’Ivoire suggest a relationship with the consumption of contaminated clay. Frequent use of PCDD/F contaminated clay products during pregnancy may result in increased exposure of the mother and subsequently the developing fetus and new-born child. The use of these contaminated clays during pregnancy should be carefully considered or even discouraged.