Developmental toxicity of cypermethrin in embryo-larval stages of zebrafish

Cypermethrin, a type II pyrethroid insecticide, is widely used throughout the world in agriculture, forestry, horticulture and homes. Though the neurotoxicity of cypermethrin has been thoroughly studied in adult rodents, little is so far available regarding the developmental toxicity of cypermethrin to fish in early life stages. To explore the potential developmental toxicity of cypermethrin, 4-h post-fertilization (hpf) zebrafish embryos were exposed to various concentrations of cypermethrin (0, 25, 50, 100, 200 and 400 μg L⁻¹) until 96 h. Among a suite of morphological abnormalities, the unique phenotype curvature was observed at concentrations as low as 25 μg L⁻¹. Studies revealed that 400 μg L⁻¹ cypermethrin significantly increased malondialdehyde production. In addition, activity of antioxidative enzymes including superoxide dismutase and catalase were significantly induced in zebrafish larvae in a concentration-dependent manner. To further investigate the toxic effects of cypermethrin on fish, acridine orange (AO) staining was performed at 400 μg L⁻¹ cypermethrin and the result showed notable signs of apoptosis mainly in the nervous system. Cypermethrin also down-regulated ogg1 and increased p53 gene expression as well as the caspase-3 activity. Our results demonstrate that cypermethrin was able to induce oxidative stress and produce apoptosis through the involvement of caspases in zebrafish embryos. In this study, we investigated the developmental toxicity of cypermethrin using zebrafish embryos, which could be helpful in fully understanding the potential mechanisms of cypermethrin exposure during embryogenesis and also suggested that zebrafish could serve as an ideal model for studying developmental toxicity of environmental contaminants.     

The evaluation of stability during the composting of different starting materials: comparison of chemical and biological parameters

Three blends formed by: (i) food processing waste (CP(FP)), (ii) waste water sewage sludge (CP(WW)), and (iii) their mixture (CP(FP+WW)), blended with tree pruning as bulking agent, were composted over 3 months. During composting the blends were monitored for the main physical-chemical characteristics: temperature, oxygen saturation level (O(2)%), pH, total and volatile solids, total organic carbon, and organic nitrogen (N(org)). In addition to the main parameters, the dissolved organic carbon (DOC), the inorganic nitrogen and the Oxygen Uptake Rate (OUR) were monitored. All the mixtures easily reached a peak temperature around 70°C, related to the lowest O(2)%. After 90 d, CP(FP), CP(FP+WW), and CP(WW) showed an organic matter mineralization of 43%, 35% and 33%, respectively; CP(FP) fitted an exponential model while both CP(FP+WW), and CP(WW) fitted a logistic model. During composting an OUR reduction of 79%, 78% and 73% was registered in CP(FP), CP(FP+WW), and CP(WW), respectively; the OUR successfully fitted the adopted exponential model and well reflected the stabilization process in time. The N(org) recovery at the end of the process was positive only in CP(WW) (11.6%). The DOC significantly decreased during the composting process but did not successfully fit any model. The mineral nitrogen did not follow the typical pattern with NH(4)(+) disappearance and NO(3)(-) accumulation. Strong NO(3)(-) losses were evident in all blends, while NH(4)(+) accumulations were detectable only in CP(FP), and CP(FP+WW). The NH(4)(+)/NO(3)(-) ratio did not satisfactorily reflect the composting process over time. The comparison of the first order (exponential) and logistic (sigmoidal) models applied to the OUR and OM course highlights the role of mineral nitrogen as limiting factor during composting of the more stabilized sludge.     

Assessing the impact of Cross Compliance measures on nitrogen fluxes from European farmlands with DNDC-EUROPE

We investigated the effects of the agricultural Cross Compliance measures for European cultivated lands, focusing on nitrogen (N) fluxes from corn fields. Four scenarios have been designed according to some conservation farming practices, namely no-till, max manure, catch crop and N splitting. Results indicated that (1) in the no-till scenario the N₂O fluxes are decreased during the first simulated years, with a return to default fluxes in following years; no-till particularly decreased N₂O emission in the dryer and colder simulation spatial units (HSMUs); (2) the no-till and the N splitting scenarios slightly increased the N surplus because of a decrease in plant uptake; (3) introducing a rotation with alfalfa decreased the N leaching in the corn crops following the catch crops; and (4) the application of fertilizer and manure during the cold and wet seasons led to an increase of N leaching.     

Validating a nondestructive optical method for apportioning colored particulate matter into black carbon and additional components

Exposure of black carbon (BC) is associated with a variety of adverse health outcomes. A number of optical methods for estimating BC on Teflon filters have been adopted but most assume all light absorption is due to BC while other sources of colored particulate matter exist. Recently, a four-wavelength-optical reflectance measurement for distinguishing second hand cigarette smoke (SHS) from soot-BC was developed (Brook et al., 2010; Lawless et al., 2004). However, the method has not been validated for soot-BC nor SHS and little work has been done to look at the methodological issues of the optical reflectance measurements for samples that could have SHS, BC, and other colored particles. We refined this method using a lab-modified integrating sphere with absorption measured continuously from 350 nm to 1000 nm. Furthermore, we characterized the absorption spectrum of additional components of particulate matter (PM) on PM(2.5) filters including ammonium sulfate, hematite, goethite, and magnetite. Finally, we validate this method for BC by comparison to other standard methods. Use of synthesized data indicates that it is important to optimize the choice of wavelengths to minimize computational errors as additional components (more than 2) are added to the apportionment model of colored components. We found that substantial errors are introduced when using 4 wavelengths suggested by Lawless et al. to quantify four substances, while an optimized choice of wavelengths can reduce model-derived error from over 10% to less than 2%. For environmental samples, the method was sensitive for estimating airborne levels of BC and SHS, but not mass loadings of iron oxides and sulfate. Duplicate samples collected in NYC show high reproducibility (points consistent with a 1:1 line, R(2) = 0.95). BC data measured by this method were consistent with those measured by other optical methods, including Aethalometer and Smoke-stain Reflectometer (SSR); although the SSR looses sensitivity at filter loadings above 90 ng/mm(2). Furthermore, positive correlations (R(2) = 0.7) were observed between EC measured by NIOSH Method 5040 on quartz filters and BC measured in co-located Teflon filter samples collected from both heating and non-heating seasons. Overall, the validation data demonstrates the usefulness of this method to evaluate BC from archived Teflon filters while potentially providing additional component information.     

Air pollution perception in ten countries during the COVID-19 pandemic

As largely documented in the literature, the stark restrictions enforced worldwide in 2020 to curb the COVID-19 pandemic also curtailed the production of air pollutants to some extent. This study investigates the perception of the air pollution as assessed by individuals located in ten countries: Australia, Brazil, China, Ghana, India, Iran, Italy, Norway, South Africa and the USA. The perceptions towards air quality were evaluated by employing an online survey administered in May 2020. Participants (N = 9394) in the ten countries expressed their opinions according to a Likert-scale response. A reduction in pollutant concentration was clearly perceived, albeit to a different extent, by all populations. The survey participants located in India and Italy perceived the largest drop in the air pollution concentration; conversely, the smallest variation was perceived among Chinese and Norwegian respondents. Among all the demographic indicators considered, only gender proved to be statistically significant.Supplementary InformationThe online version contains supplementary material available at 10.1007/s13280-021-01574-2.     

可燃物填充比对火蔓延影响的实验研究

提出了一种可精确控制燃料床填充比的方法.以刨花为燃料,开展了可燃物填充比对火蔓延影响的系统性实验研究.分析了火焰长度、火焰倾斜角、火蔓延速率、质量损失速率和热流密度随填充比的变化规律.研究发现,随填充比增大,火焰长度逐渐减小,火焰倾斜角逐渐增加,导致火焰热辐射降低、火蔓延速率减小.当填充比小于0.06时,燃料消耗率接近...     

Evaluating urban PM10 pollution benefit induced by street cleaning activities

Despite their burden in urban particulate air pollution, road traffic non-exhaust emissions are often uncontrolled and information about the effectiveness of mitigation measures on paved roads is still scarce. The present study is aimed to evaluate the effectiveness of mechanical sweeping/water flushing treatments in mitigating urban road dust resuspension and to quantify the real benefit in terms of ambient PM₁₀ concentrations. To this aim a specific campaign was carried out in a heavily trafficked central road of Barcelona (Spain), a Mediterranean city suffering from a traffic-related pollution, both for a high car density and a frequent lack of precipitation. Several street washings were performed by means of mechanical sweepers and pressure water during night in all traffic lanes and sidewalks. PM₁₀ levels were simultaneously compared with four reference urban background air quality stations to interpret any meteorological variability. At the downwind measurement site, PM₁₀ concentrations registered a mean daily decrease of 8.8 μg m^?3 during the 24 h after street washing treatments. However 3.7–4.9 μg m^?3 of such decrease were due to the meteorological variability detected at the upwind site, as well as at two of the reference sites. This reveals that an effective decrease of 4–5 μg m^?3 (7–10%) can be related to street washing efficiency. Mitigation of road dust resuspension was confirmed by investigating the chemical composition of airborne-PM₁₀ filters. Concentrations of Cu, Sb, Fe and mineral matter decrease significantly with respect to concentrations of elemental carbon, used as tracer for exhaust diesel emissions. High efficiency of street washing in reducing road dust loads was found by performing periodic samplings both on the treated and the untreated areas.     

Resource Consumption and Environmental Impacts of the Agrofood Sector: Life Cycle Assessment of Italian Citrus-Based Products

Food production and consumption cause significant environmental burdens during the product life cycles. As a result of intensive development and the changing social attitudes and behaviors in the last century, the agrofood sector is the highest resource consumer after housing in the EU. This paper is part of an effort to estimate environmental impacts associated with life cycles of the agrofood chain, such as primary energy consumption, water exploitation, and global warming. Life cycle assessment is used to investigate the production of the following citrus-based products in Italy: essential oil, natural juice, and concentrated juice from oranges and lemons. The related process flowcharts, the relevant mass and energy flows, and the key environmental issues are identified for each product. This paper represents one of the first studies on the environmental impacts from cradle to gate for citrus products in order to suggest feasible strategies and actions to improve their environmental performance.

生物法脱除污水处理厂硫化氢的研究

试验并研究了生物滴滤塔处理污水处理厂硫化氢气体的技术,分析了负荷、压降、温度等因素对生物法脱除硫化氢恶臭气体工艺的影响。     

利用“生态足迹”促进绿色校园建设

运用“生态足迹”计算来提高学校综合管理能力,是学习落实科学发展观、建立资源节约型社会的有益尝试。由学生自发形成的兴趣小组,把生态足迹的基本原理和计算方法运用于建设资源节约型校园,并根据有关结果采取相应的有效措施降低校园生态产品消耗,为促进资源节约型学校的建立提供有益经验。