Heavy Metal Concentrations in and Around Households Near a Secondary Lead Smelter

Housedusts and garden soils were sampled in 14 houses in the vicinity of a secondary Pb smelter and analysed for concentrations of Pb, Zn, Cu, Cd, As, and Hg. Sixty-one topsoil samples were also taken from a 2 km² grid covering the smelter grounds and surrounding residential areas and analysed for concentrations of Pb, Zn, Cd and Cu. Contour maps generated from the grid data indicate significant contamination in the area (maximum Pb concentration 58 500 g g^-1), particularly down-wind of the smelter grounds. A geometric mean Pb concentration of 2225 g g^-1 was recorded in garden soil and similarly elevated levels were recorded for Zn, Cd, As and Sb. In housedusts, a geometric mean Pb concentration of 1668 g g^-1 was observed. Whilst housedust metal concentrations were generally elevated, compared to other urban or residential areas, there appears to be a large degree of attenuation of the metals between the exterior and interior environments of the homes studied. A significant correlation was not recorded between metal concentrations of garden soils and housedusts. There were significant correlations for: distance from the smelter against garden soil metal concentrations; garden soil metal concentrations against each other; housedust metal concentrations against each other; and house age against garden soil metal concentrations.     

Analysis of river water samples utilising a prototype industrial sensing system for phosphorus based on micro-system technology

The application of a phosphorus monitoring device based on microsystems technology (MST) to the analysis of river water is presented. An alternative to the standard molybdenum blue method known as the yellow vanadomolybdophosphoric acid method has been very effectively implemented. The method is simple, a reagent and sample are mixed in a 1:1 ratio forming a yellow complex that absorbs strongly below 400 nm in the UV spectrum. The kinetics of the reaction are rapid and sample turnaround is typically 3 min at room temperature. Therefore a very uncomplicated microfluidic design can be adopted. The working wavelength was chosen as 380 nm to coincide with the peak output of a UV-LED narrow bandwidth light source recently developed by Nichia. The limit of detection for the yellow method in the microfluidic system is 0.2 ppm with a dynamic linear range from 0-50 ppm. The method was applied to a measurement of phosphorus in a local river at specific sampling points along its course.     

Effects of sulphur dioxide (SO2) on growth and flowering of SO2-tolerant and non-tolerant genotypes of Phleum pratense

The objective of this study was to compare the growth and interaction of clipping and sulphur dioxide (SO(2)) exposure on SO(2)-tolerant and non-tolerant genotypes of Phleum pratense at two field sites along an SO(2)-concentration gradient. Sulphur-dioxide-tolerant and non-tolerant genotypes of Phleum pratense were identified from indigenous populations that had been collected along the same SO(2)-concentration gradient in southern Alberta, Canada. Physiological differences between the two genotypes were confirmed by supplying leaves with (14)CO(2) and examining the assimilate partitioning between the genotypes. For the field experiment, clones of each genotype and seedlings grown from commercial seed were planted at two different field sites along an SO(2)-emission gradient. There were no differences in growth between the genotypes at the two field sites after the first year except that the SO(2)-tolerant clones had a greater percentage of root length colonised by vesicular-arbuscular (VA) mycorrhizal fungi. After the second growing season, there was a significant decrease in the number of inflorescences produced by plants exposed to SO(2), particularly by the non-tolerant genotype. The added stress of defoliation appeared to increase the sensitivity of flowering to SO(2), again particularly in the non-tolerant genotype. The results of the field study showed that flowering as opposed to vegetative plant growth was more sensitive to long-term low-concentration SO(2) exposure and that this sensitivity was compounded by the stress interaction of defoliation.     

Persistent organic pollutants in Alaskan ringed seal (Phoca hispida) and walrus (Odobenus rosmarus) blubber

Since 1987, the Alaska Marine Mammal Tissue Archival Project (AMMTAP) has collected tissues from 18 marine mammal species. Specimens are archived in the National Institute of Standards and Technology's National Biomonitoring Specimen Bank (NIST-NBSB). AMMTAP has collected blubber, liver and/or kidney specimens from a number of ringed seals (Phoca hispida) from the areas near Nome and Barrow, Alaska and walruses (Odobenus rosmarus) from several locations in the Bering Sea. Thirty-three ringed seal and 15 walrus blubber samples from the NIST-NBSB were analyzed for persistent organic pollutants (POPs). The compounds determined included PCBs (28 congeners or congener groups), DDT and related compounds, hexachlorobenzene (HCB), hexachlorocyclohexane isomers (HCHs), chlordanes, dieldrin, and mirex. POP concentrations in ringed seal blubber were significantly higher in Barrow than in Nome when statistically accounting for the interaction of age and gender; HCB, however, was not statistically different between the two locations. Unlike males, POP concentrations and age were not significantly correlated in females probably as a result of lactational loss. POP concentrations in walrus blubber were lower than in ringed seal blubber for SigmaPCBs, chlordanes, and HCHs, but higher for dieldrin and mirex. POP concentrations in ringed seals and walrus from Alaska provide further evidence that the western Arctic tends to have lower or similar POP concentrations compared to the eastern Canadian Arctic.     

Explaining nursing turnover intent: job satisfaction,pay satisfaction,or organizational commitment?

A number of models have been developed to explain nurses' turnover behavior. The common theme that emerges from these models is that turnover behavior is a multistage process that includes attitudinal, decisional, and behavioral components. The purpose of this study was to assess both the direct and indirect impact of certain pay policies upon the turnover intentions of paediatric nurses. The two major questions addressed were: What was the relative impact of job satisfaction, pay satisfaction, and organizational commitment upon the turnover intentions of paediatric nurses eligible for these pay policies? What model accurately portrays the relationship among these three independent variables and turnover intentions? Exploration of the causal pathways among these variables and demographic factors revealed complex models of association. The results suggest that job satisfaction has only an indirect influence on the intention to quit, whereas organizational commitment has the strongest and most direct impact. A further finding that pay satisfaction had both direct and indirect effects on turnover intent was consistent with administrators' assumptions underlying the pay policies. Control variables such as having a degree, having children, and working 12-hour shifts were found to have both direct and indirect influences upon pay satisfaction and turnover intent. © 1998 John Wiley & Sons, Ltd.     

Economic and Environmental Benefits of Using Hardwood Sawmill Waste as a Raw Material for Particleboard Production

Annually, sawmills and other wood-processing factories generate a significant amount of scrap materials which are sent to landfills or incinerated. The amount of residue generated in Australia annually is estimated at 200,000 tonnes. A research project conducted at RMIT University explored utilizing these waste materials as particleboard furnish. The research team has now established a methodology for making particleboard in the laboratory using 100% hardwood sawmill residues, developing a particleboard product made in the laboratory which has acceptable mechanical properties and density profiles in accordance with the Australian Standards. However, this board product has some perceived issues which have been hindering ready commercial uptake. The current product requires a 10% higher resin load, has a 10% higher board density, and requires 10% longer pressing times compared to normal softwood particleboard. The paper presents an analysis of the current production process of particleboard to investigate the economic feasibility of particleboard production using hardwood sawmill residues. A major challenge in the analysis is converting the environmental benefit of utilizing large quantities of sawmill residue to a monetary term. Investigation of the global impact of particleboard by considering emission of carbon dioxide to the atmosphere is also included. A comparison is presented between different methods of disposing wood residues to understand the environmental benefit of using hardwood residue in particleboard.     

Improving team effectiveness using tactical decision games

This paper addresses the development of training in team-level decision making to lead to improvements in safety and performance. A one-day Workshop was developed around tactical decision games (TDGs) for use by action teams, i.e. involving a team of multi-disciplinary experts, in the oil and gas drilling industry. Three TDGs were conducted to help team members to rehearse how they would respond to potential challenging situations, focusing in particular on team skills, such as decision making, situation awareness and communication. TDGs have previously been presented as a useful training technique to improve decision making and have been introduced in many high hazard industries [Crichton, M., Flin, R., Rattray, W.A., 2000. Training decision makers – tactical decision games. Journal of Contingencies and Crisis Management 8(4), 208–217]. Building on TDGs for individuals, in a team-based TDG, team members discuss the scenario and reach a team-based solution, allowing team members to recognise the potential differing perspectives brought to the solution by team members from different disciplines. Specific team skills aspects raised during the TDG scenario were then generalised to the wider project, and their impact on overall team performance, safety, and effectiveness. Members of a deepwater exploration wells team (n = 30) attended the Workshop and reported that the use of TDGs in the Workshop was valuable in defining and illustrating team skills and their influence on team performance, and helping to prepare better for their forthcoming operations.     

Application of a luminescence-based biosensor for assessing naphthalene biodegradation in soils from a manufactured gas plant

Despite numerous reviews suggesting that microbial biosensors could be used in many environmental applications, in reality they have failed to be used for which they were designed. In part this is because most of these sensors perform in an aqueous phase and a buffered medium, which is in contrast to the nature of genuine environmental systems. In this study, a range of non-exhaustive extraction techniques (NEETs) were assessed for (i) compatibility with a naphthalene responsive biosensor and (ii) correlation with naphthalene biodegradation. The NEETs removed a portion of the total soil naphthalene in the order of methanol > HPCD > βCD > water. To place the biosensor performance to NEETs in context, a biodegradation experiment was carried out using historically contaminated soils. By coupling the HPCD extraction with the biosensor, it was possible to assess the fraction of the naphthalene capable of undergoing microbial degradation in soil.     

Beyond contaminated land assessment: On costs and benefits of bioaccessibility prediction

Advances towards sustainable land management necessitate application of a broader portfolio of decision-support tools that improve evaluation of contaminated land. Over the last decade regulators have directed concerted effort towards rationalization of risk-based contaminated land policies recognizing bioavailability and bioaccessibility as concepts to be incorporated into risk assessments. The desire for a precise and rapid method to inform consideration of bioavailability and bioaccessibility to support risk assessment of contaminated land has never been greater. This study presents a comprehensive appraisal of both emerging non-exhaustive extraction techniques (subcritical water extraction and Brij 700 extraction) developed to reflect polycyclic aromatic hydrocarbon (PAH) bioaccessibility to microorganisms as well as formerly demonstrated methodologies (the use of cyclodextrins and butanol extraction). Application of unified evaluation criteria across different techniques enabled comparison not only from the bioaccessibility prediction perspective but also analysis of economical (cost of extraction) and practical (such as extraction time) measures. Whilst the use of cyclodextrins was the best predictor of the bioaccessible fraction for the majority of compounds, other methods appeared more cost- and time-effective. Juxtaposition of the techniques presented in this study assists establishing cost-benefit trade-offs of different non-exhaustive extraction techniques and contributes to tailoring information on contaminant bioaccessibility to support risk evaluation on contaminated sites.     

Climate Change and River Ecosystems: Protection and Adaptation Options

Rivers provide a special suite of goods and services valued highly by the public that are inextricably linked to their flow dynamics and the interaction of flow with the landscape. Yet most rivers are within watersheds that are stressed to some extent by human activities including development, dams, or extractive uses. Climate change will add to and magnify risks that are already present through its potential to alter rainfall, temperature, runoff patterns, and to disrupt biological communities and sever ecological linkages. We provide an overview of the predicted impacts based on published studies to date, discuss both reactive and proactive management responses, and outline six categories of management actions that will contribute substantially to the protection of valuable river assets. To be effective, management must be place-based focusing on local watershed scales that are most relevant to management scales. The first priority should be enhancing environmental monitoring of changes and river responses coupled with the development of local scenario-building exercises that take land use and water use into account. Protection of a greater number of rivers and riparian corridors is essential, as is conjunctive groundwater/surface water management. This will require collaborations among multiple partners in the respective river basins and wise land use planning to minimize additional development in watersheds with valued rivers. Ensuring environmental flows by purchasing or leasing water rights and/or altering reservoir release patterns will be needed for many rivers. Implementing restoration projects proactively can be used to protect existing resources so that expensive reactive restoration to repair damage associated with a changing climate is minimized. Special attention should be given to diversifying and replicating habitats of special importance and to monitoring populations at high risk or of special value so that management interventions can occur if the risks to habitats or species increase significantly over time.