Statistical analysis of heavy metal data from municipal waste incineration residues

Heavy Metal data from a measurement program at a municipal incinerator in Vienna, Austria are analysed. The experimental design had a nested structure, and analysis of variance is used to break down the total variability into several components; (1) variability between mean hourly concentrations, (2) variability between mean sample concentrations within intervals of an hour and (3) variability due to “measurement” errors. Results of a pre-experiment show, that if grab samples are taken, within hour variation is dominant. The results of analysis of variance were used to calculate an optimal number of samples, which ensure a predetermined accuracy for the mean concentrations. In two main measuring periods with different incinerated waste types, slag and fly ash (ESP dust and boiler ash) data are produced and analysed. For both slag and fly ash, significant differences in measures of location and dispersion between the data sets of the main experiment are found. This proves, that differences in the chemical set up of waste can be detected via incineration residues.     

Relationship between release of nitric oxide and CO2 and their dependence on oxidation reduction potential in wastewater treatment

Nitric oxide (NO) is an intermediate of denitrification process and can be produced by denitrifiers, nitrifiers and other bacteria. In our experiments we measured the dynamic flow of NO depending on oxidation reduction potential (ORP). Different ORP-ranges were related to various carbon loading stages in the wastewater treatment pilot plant. Nitrification and denitrification were achieved by a sequence of aeration and non-aeration periods. Our measurements show that different carbon loading conditions (low feed, balanced and overloaded conditions) did not change the range of the mixing ratio of NO emissions when the aeration conditions like air-flow and temperature were kept constant. Minimum and maximum NO mixing ratios were 34.7 and 91.8 ppbv; 52.3 and 91.3 ppbv; 57.6 and 109 ppbv for low feed, balanced and overloaded conditions, respectively. The curve of the NO graph relied on nitrification/denitrification dynamics. The dependence of NO release on different ORP and CO2-release during the various conditions are shown. Longer aeration times resulted in an increased release of gaseous NO. The net-release of NO g(-1) nitrogen removed was between 0.014% and 0.028%. The NO fluxes to the air were observed between 8.3 and 14.9 mg m(-2) d(-1) NO. The major release occurred during high aeration periods whereas the concentration of dissolved [NOaq] in the wastewater was less than 0.05% of the gaseous release due to very low solubility of the NO.     

The use of Littorina littorea for tributyltin (TBT) effect monitoring - Results from the German TBT survey 1994/1995 and laboratory experiments

Field investigations and laboratory experiments were performed to test the applicability of the intersex phenomenon in Littorina littorea for biological TBT-effect monitoring and to give further insights into toxicological aspects of intersex development. The intensity of the phenomenon is correlated with the degree of TBT contamination in the environment. Statistically highly significant correlations of biological indices and TBT concentrations in tissue and sediment exist. Intersex can be induced only in juvenile and sexually immature females and its intensity depends on the ontogenetic stage of development during TBT exposure. For the first time, malformations in male periwinkles closely related to the TBT contamination can be described; the reduction of male mamilliform penial glands shows highly significant correlations to TBT concentrations in tissues. The intersex phenomenon in Littorina littorea is proposed for a biological TBT-effect monitoring in those areas where the dogwhelk Nucella lapillus, as the more sensitive species in European surveys, is absent. The intersex index (ISI) as the mean value of the intersex stages in a sample should be used as the most sensitive biological parameter for the assessment of the TBT contamination in Littorina littorea.     

OECD 236的鱼类胚胎实验(Fish Embryo Test, FET)是否足够敏感，能有效进行排水风险评价吗？

近年来,由于“动物友好”协议的广泛应用,鱼类胚胎实验(Fish Embryo Test, FET)成为了生态毒理学研究的主要方法。OECD 236 FET方法在REACH法规所辖范围内广泛应用,主要针对简单混合物暴露情况(simple mixture exposures),但其还在世界范围内被盲目地用于排放废水综合测试(Whole Effluent Test, WET),这是一种复杂混合物暴露情况。然而,评价FET方法用于WET的有效性的可靠数据几乎没有。本文将OECD 236 FET方法与其他国际通用的标准的和略作改进的生态毒理学研究方案进行了比较,得出了可用于WET的测试方法的总体评价结果。我们使用了未经处理的医院排水,通常认为该排水具有高毒性,且会进入市政污水处理系统。我们选择的毒性测试方法包括OECD 203 (juvenile), USEPA 2000.0 (larva) and OECD 236 (embryo)。值得一提的是,我们还额外测试了3个亚致死指标(不移动性、不孵化率、心包囊肿),这些指标可以提高OECD 236方法的敏感性。我们在所选的8种方法中考察了急性毒性数据,方法的敏感性均有提高且胚胎实验≤仔鱼实验<幼鱼实验(Embryo≤Juvenile 详情请见 https://doi.org/10.1002/etc.4215