The return of the giants: ecological effects of an increasing elephant population

Northern Botswana and adjacent areas, have the world's largest population of African elephant (Loxodonta africana). However, a 100 years ago elephants were rare following excessive hunting. Simultaneously, ungulate populations were severely reduced by decease. The ecological effects of the reduction in large herbivores must have been substantial, but are little known. Today, however, ecosystem changes following the increase in elephant numbers cause considerable concern in Botswana. This was the background for the "BONIC" project, investigating the interactions between the increasing elephant population and other ecosystem components and processes. Results confirm that the ecosystem is changing following the increase in elephant and ungulate populations, and, presumably, developing towards a situation resembling that before the reduction of large herbivores. We see no ecological reasons to artificially change elephant numbers. There are, however, economic and social reasons to control elephants, and their range in northern Botswana may have to be artificially restricted.     

Precipitation of swine and cattle manure phosphorous using limestone dust

The effectiveness of SPS and PULPRO, fine limestone dusts, in precipitating swine and dairy manure phosphorous (P) was determined in the laboratory. Both manures were sieved before being treated with limestone, to reproduce the treatment of mechanically separated manure and to observe the precipitation effect of limestone without that of the large manure solid particles. P precipitation was optimized by varying precipitation conditions (propeller blade speeds, mixing time and limestone levels) and limestone particle size. P precipitation was optimized using a propeller blade mixing speed of 0.3 m s(-1) for at least 5 minutes, using 3% limestone (dry limestone mass over wet manure mass). In terms of particle size, PULPRO 20 (limestone with a particle size of 0.02 mm) produced the most P precipitation and the smallest volume and mass of sludge, as compared to PULPRO 10, PULPRO 3 and SPS (limestone with a particle size of 0.01, 0.003 and 0.3 to 0.003 mm, respectively). For both 9.5% TS (total solids) dairy and 8.8% TS swine manure, mechanical separation followed by limestone precipitation concentrated 90% of manure TS and TP in a sludge volume representing 45% of the initial raw manure mass.     

Metabolism of potassium bromate in rats I. In vivo studies

Potassium Bromate was administered orally to rats and its fate in the body was studied. The bromate was rapidly absorbed from the digestive tract and was partly excreted in the urine within two hours of administration. No bromate was detected in body organs or in the blood 24 hours after dosing. Excretion of bromate into the urine was proportional to the dose, except that at 2.5mg/kg or less no excretion was observed. The administration of bromate increased the bromide concentration in various organs and in urine.     

Biodegradability of surfactants and inhibition of surfactants to biodegradation of other pollutants

Changes of BOD/TOD and DOC with time were obtained for solutions of 9 synthetic surfactants and 2 fatty acid salts under various conditions. The cationic surfactants, ABM and ABDM, were not biodegraded at all and inhibited the biodegradation of a synthetic sewage. LAS was not biodegraded at concentration of 30 mg/l and higher and inhibited the biodegradation of the sewage.     

Effect of metabolism on bioconcentration of geometric isomers of d-phenothrin in fish

Yearling carp (Cyprinus carpio) were exposed to d-phenothrin (a 1:4 mixture of d-cis and d-trans isomers) in the absence and the presence of piperonyl butoxide under the flow-through test condition and the bioconcentration factors (BCF's) of the geometric isomers were separately evaluated. It was demonstrated that BCF values for the d-cis isomer were significantly higher by 1.1 to 2.2-fold than those for the d-trans isomer and the subsequent exposure in the presence of piperonyl butoxide resulted in elevated BCF values for the d-cis isomer, but no remarkable change in BCF's was observed for the d-trans isomer. The elevation observed here was presumably attributable to a reduced elimination caused by inhibited oxidative reactions characteristic to the d-cis isomer. The contribution of biotransformation to the elimination rate constant (K₃/K₂ was estimated to be 2.3–11. Thus, the result was well explained by a distinct oxidative metabolism of the d-cis isomer and a significance of metabolism in bioconcentration phenomenon was exemplified.     

Comparison of SFE with Soxhlet in the analyses of PCDD/PCDFs and PCBs in sediment

The efficiency of supercritical fluid extraction (SFE) for the isolation of polychlorinated biphenyls (PCBs), dibenzo-p-dioxins (PCDD) and dibenzofurans (PCDF) from sediments was investigated by comparing SFE with Soxhlet. Five sediments obtained from an international interlaboratory study were used as a test material. SFE was performed with an automatic system where extracted analytes were collected by solid-phase trapping using carbon mixed with Celite as an adsorbent. For the first time, SFE of the most toxic PCBs, coplanar PCBs, was studied with real sediment samples. The majority of PCBs investigated, a total of 38 congeners from tri- to decachlorinated, were quantitatively extracted from sediment by SFE with pure CO2 at pressure 400 atm and temperature 100 degrees C. Under these conditions a successful extraction was obtained also for PCDD/PCDFs except for hepta- and octachlorinated congeners. Copper powder added to the sediment efficiently prevented the transfer of sulfur from the sample during SFE. The TEQs of both PCDD/PCDFs and PCBs obtained by SFE corresponded well with those obtained by the Soxhlet-based method. The reproducibility of SFE was high for both groups.     

Community energy initiatives to alleviate fuel poverty: the material politics of Energy Cafés

Community action has an increasingly prominent role in the debates surrounding transitions to sustainability. Initiatives such as community energy projects, community gardens, local food networks and car sharing clubs provide new spaces for sustainable consumption, and combinations of technological and social innovations. These initiatives, which are often driven by social good rather than by pure monetary motives, have been conceptualised as grassroots innovations. Previous research in grassroots innovations has largely focused on conceptualising such initiatives and analysing their potential for replication and diffusion; there has been less research in the politics involved in these initiatives. We examine grassroots innovations as forms of political engagement that is different from the 1970s’ alternative technology movements. Through an analysis of community-run Energy Cafés in the United Kingdom, we argue that while present-day grassroots innovations appear less explicitly political than their predecessors, they can still represent a form of political participation. Through the analytical lens of material politics, we investigate how Energy Cafés engage in diverse – explicit and implicit, more or less conscious – forms of political engagement. In particular, their work to “demystify” clients’ energy bills can unravel into various forms of advocacy and engagement with energy technologies and practices in the home. Some Energy Café practices also make space for a needs-driven approach that acknowledges the embeddedness of energy in the household and wider society.     

Effect of additives on dechlorination of PVC by mechanochemical treatment

Polyvinyl chloride (–CH₂–CHCl–) _n (PVC) was ground with a powdered inorganic material (CaO, CaCO₃, SiO₂, Al₂O₃, or slag) in a planetary ball mill under atmospheric conditions to investigate the effect of additions on its dechlorination. The grinding causes a dehydrochlorinating reaction, forming a mixture of partially dechlorinated PVC and inorganic chloride, depending on the grinding time. The dechlorination increases as the grinding progresses, and is improved with increasing amounts of additives. The most effective additive is a mixture of CaO, SiO₂, and Al₂O₃, which has the same constituent components as blast furnace slag. CaO, a mixture of CaO, SiO₂, and blast furnace slag, are also effective, but CaCO₃ is the least effective additive tired. Received: August 3, 2000 / Accepted: September 21, 2000     

Embryonic development assay with Daphnia magna: application to toxicity of aniline derivatives.

An assay system using Daphnia magna embryos was applied to investigate the adverse effects of aniline derivatives. The data were compared with our previous data for chlorophenols. This new assay provides useful information to evaluate the toxicity of chemicals and the differences in sensitivity between the life stages. The effects of 15 aniline derivatives on embryonic development of D. magna embryos were determined. At the start of exposure, 2-6-h old eggs (between stages 1 and 2, round in shape, diameter approx. 400 microm), were used. In control and solvent control groups, embryonic development from an egg to a free-swimming animal proceeded completely within 3 days with more than 90% hatchability. Median effective concentrations (EC50s) to reduce the numbers hatched were determined and gross morphological abnormalities of hatched animals recorded. Anilines induced no obvious morphological abnormalities and no developmental delay although premature deaths occurred. However, they affected the number of embryos hatching in a dose-dependent manner. In addition, this embryo assay was more sensitive to aniline derivatives (except for aniline) than acute juveniles immobilization assay. Ratios of 48-h EC50 (juvenile)/3-day EC50 (embryo) for eight anilines were greater than 5.0. Particularly, the ratios of 4-methyl-, 4-ethyl- and 3-methylaniline were 77, 23 and 11, respectively. EC50s for embryos and juveniles were poorly correlated (r = 0.41). This indicated that the sensitivities of the two life stages were different to the effects of anilines. EC50s were poorly correlated (r = -0.097) with the log Kow (1-octanol/water partition coefficient). These results were compared with previous results for phenols.