Environmental performance evaluation of agro-industrial innovations – Part 2: methodological approach for performing vulnerability analysis of watersheds

Environmental vulnerability analysis has been sparsely used in environmental performance evaluation (EPE) of technological innovations. The present paper proposes a methodological approach to carry out vulnerability analysis of watersheds and to integrate this analysis into methods of environmental performance evaluation of agro-industrial innovations. This approach is applied to the Ambitec-Life Cycle method, described in Part 1 (this issue) of this study. The case study of green coconut substrate compared to ripe coconut substrate, also described in Part 1 (this issue), is now presented considering the vulnerability analysis of the watersheds where the life cycle stages of these products occur. The integration of vulnerability analysis in Ambitec-Life Cycle contributes to a better understanding of the environmental aspects of agro-industrial technological innovations with potential to cause significant impacts in watersheds where these innovations are implemented.     

Decomposition of benzo (a) pyrene deposited on glass fiber filters and exposed to sunlight

Measurements of Benzo (a) Pyrene deposited on glass fiber filters exposed to solar radiation indicate a time dependent exponential decrease. Possible impl$\text{i}$ cations of this phenomenon in the measurements of B(a)P in particulate samples are discussed.     

Earthworm resources of Benghazi, Libya

This study presents the first survey of earthworm species (Oligochaeta) from Benghazi, a Mediterranean coastal city in Libya. A total of three peregrine species were recorded: Allolobophora caliginosa trapezoides, Allolobophora rosea (Family: Lumbricidae), Microscolex dubius (Family: Microscolecidae). Their distribution and density in six habitats (vegetable garden, flower garden, green house, farmland, grassland, plain barren landscape) are discussed in relation to some of the physico-chemical parameters and composition of the soil.     

Anaerobic degradation of hexachlorocyclohexane isomers in liquid and soil slurry systems

Gamma-hexachlorocyclohexane (gamma-HCH or lindane), one of the most commonly used insecticides, has been mainly used in agriculture. Organochloride compounds are known to be highly toxic and persistent, causing serious water and soil pollution. The objective of the present study is the evaluation of the anaerobic degradation of alpha-, beta-, gamma-, delta-HCH in liquid and slurry cultures. The slurry system with anaerobic sludge appears as an effective alternative in the detoxification of polluted soils with HCH, as total degradation of the four isomers was attained. While alpha- and gamma-HCH disappeared after 20-40d, the most recalcitrant isomers: beta- and delta-HCH were only degraded after 102d. Intermediate metabolites of HCH degradation as pentachlorocyclohexane (PCCH), tetrachlorocyclohexene (TCCH), tri-, di- and mono-chlorobenzenes were observed during degradation time.     

Identification of hydroxylated metabolites in 2,2',4,4'-tetrabromodiphenyl ether exposed rats

Faeces from day 1-5 of orally administered 2,2',4,4'-tetrabromodiphenyl ether (BDE-47) in rat have been analysed for hydroxylated metabolites. Six hydroxylated tetrabrominated diphenyl ethers, as well as three hydroxylated tribrominated diphenyl ethers found, were structurally identified. They were 2'-hydroxy-2,4,4'-tribromodiphenyl ether, 3'-hydroxy-2,4,4'-tribromodiphenyl ether, 4'-hydroxy-2,2',4-tribromodiphenyl ether, 6-hydroxy-2,2',4,4'-tetrabromodiphenyl ether, 2'-hydroxy-2,3',4,4'-tetrabromodiphenyl ether, 3-hydroxy-2,2',4,4'-tetrabromodiphenyl ether, 5-hydroxy-2,2',4,4'-tetrabromodiphenyl ether, 4'-hydroxy-2,2',4,5'-tetrabromodiphenyl ether and 4-hydroxy-2,2',3,4'-tetrabromodiphenyl ether. The analysis was performed using gas chromatography-mass spectrometry (GC-MS). The identification of the hydroxylated polybrominated diphenyl ether (OH-PBDE) metabolites in the rat faeces was supported by similar relative retention times (RRTs) versus 2,2',3,4,4',5-hexabromodiphenyl ether (BDE-138) on two columns of different polarities compared to the authentic references. The identification of the OH-PBDE metabolites was also supported by full scan electron ionisation mass spectra. Two of the identified OH-PBDE metabolites have identical structures as natural products, which previously have been isolated from marine sponges and an ascidian.     

Uptake and distribution of Zn, Cu, Cd, and Pb in an aquatic plant Potamogeton natans

A better understanding of metal uptake and translocation by aquatic plants can be used to enhance the performance of constructed wetland systems for stormwater treatment. Specifically, this study examines whether the uptake of Zn, Cu, Cd, and Pb by Potamogeton natans is via the leaves, stems, or roots, and whether there is translocation from organs of uptake to other plant parts. Competition between the metals at uptake and at the level of the cell wall-bound part of the metals accumulated in stem and leaf tissue was also examined. The results show that Zn, Cu, Cd, and Pb were taken up by the leaves, stems, and roots, with the highest accumulation found in the roots. At the elevated metal concentrations common in stormwater the uptake of Cu, but not of Zn, Cd, or Pb, by the roots was somewhat limited at uptake due to competition with other metals. Between 24% and 59% of the metal content was bound to the cell walls of the plant. Except in the case of Pb, the cell wall-bound fraction was generally smaller in stems than in leaves. No translocation of the metals to other parts of the plant was found, except for Cd which was translocated from leaf to stem and vice versa. Dispersion of metals from sediment to water through P. natans is therefore unlikely.     

Sequential removal of heavy metals ions and organic pollutants using an algal-bacterial consortium

The residual algal-bacterial biomass from photosynthetically supported, organic pollutant biodegradation processes, in enclosed photobioreactors, was tested for its ability to accumulate Cu(II), Ni(II), Cd(II), and Zn(II). Salicylate was chosen as a model contaminant. The algal-bacterial biomass combined the high adsorption capacity of microalgae with the low cost of the residual biomass, which makes it an attractive biosorbent for environmental applications. Cu(II) was preferentially taken-up from the medium when the metals were present both separately and in combination. There was no observed competition for adsorption sites, which suggested that Cu(II), Ni(II), Cd(II), and Zn(II) bind to different sites and that active Ni(II), Cd(II) and Zn(II) binding groups were present at very low concentrations. Therefore, special focus was given to Cu(II) biosorption. Cu(II) biosorption by the algal-bacterial biomass was characterized by an initial fast cell surface adsorption followed by a slower metabolically driven uptake. pH, Cu(II), and algal-bacterial concentration significantly affected the biosorption capacity for Cu(II). Maximum Cu(II) adsorption capacities of 8.5+/-0.4 mg g-1 were achieved at an initial Cu(II) concentration of 20 mg l-1 and at pH 5 for the tested algal-bacterial biomass. These are consistent with values reported for other microbial sorbents under similar conditions. The desorption of Cu(II) from saturated biomass was feasible by elution with a 0.0125 M HCl solution. Simultaneous Cu(II) and salicylate removal in a continuous stirred tank photobioreactor was not feasible due to the high toxicity of Cu(II) towards the microbial culture. The introduction of an adsorption column, packed with the algal-bacterial biomass, prior to the photobioreactor reduced Cu(II) concentration, thereby allowing the subsequent salicylate biodegradation in the photobioreactor.