Extending large-scale forest inventories to assess urban forests

Urban areas are continuously expanding today, extending their influence on an increasingly large proportion of woods and trees located in or nearby urban and urbanizing areas, the so-called urban forests. Although these forests have the potential for significantly improving the quality the urban environment and the well-being of the urban population, data to quantify the extent and characteristics of urban forests are still lacking or fragmentary on a large scale. In this regard, an expansion of the domain of multipurpose forest inventories like National Forest Inventories (NFIs) towards urban forests would be required. To this end, it would be convenient to exploit the same sampling scheme applied in NFIs to assess the basic features of urban forests. This paper considers approximately unbiased estimators of abundance and coverage of urban forests, together with estimators of the corresponding variances, which can be achieved from the first phase of most large-scale forest inventories. A simulation study is carried out in order to check the performance of the considered estimators under various situations involving the spatial distribution of the urban forests over the study area. An application is worked out on the data from the Italian NFI.     

Particle emission from heavy-duty engine fuelled with blended diesel and biodiesel

In this study, particulate matter (PM) were characterized from a place impacted by heavy-duty vehicles (Bus Station) fuelled with diesel/biodiesel fuel blend (B3) in the city of Londrina, Brazil. Sixteen priority polycyclic aromatic hydrocarbons (PAH) concentrations were analyzed in the samples by their association with atmospheric PM, mass size distributions and major ions (fluorite, chloride, bromide, nitrate, phosphate, sulfate, nitrite, oxalate; fumarate, formate, succinate and acetate; lithium, sodium, potassium, magnesium, calcium and ammonium). Results indicate that major ions represented 21.2% particulate matter mass. Nitrate, sulfate, and ammonium, respectively, presented the highest concentration levels, indicating that biodiesel may also be a significant source for these ions, especially nitrate. Dibenzo[a,h]anthracene and indeno[1,2,3,-cd]pyrene were the main PAH found, and a higher fraction of PAH particles was found in diameters lower than 0.25 μm in Londrina bus station. The fine and ultrafine particles were dominant among the PM evaluated, suggesting that biodiesel decreases the total PAH emission. However, it does also increase the fraction of fine and ultrafine particles when compared to diesel.     

The effects of pesticide mixtures on degradation of pendimethalin in soils

Most agronomic situations involve a sequence of herbicide, fungicide, and insecticide application. On the other hand, use of pesticidal combinations has become a standard practice in the production of many agricultural crops. One of the most important processes influencing the behavior of a pesticide in the environment is its degradation in soil. It is known that due to several pesticide applications in one vegetation season, the pesticide may be present in mixtures with other pesticides or xenobiotics in soil. This study examines the role which a mixture of chemicals plays in pesticide degradation. The influence of other pesticides on the rate of pendimethalin (PDM) degradation in soil was measured in controlled conditions. Mixtures of PDM with mancozeb or mancozeb and thiamethoxam significantly influenced the degradation of pendimethalin under controlled conditions. The second type of mixtures, with metribuzin or thiamethoxam, did not affect the behavior of pendimethalin in soil. Also, we determined the influence of water content on the rate of pendimethalin degradation alone in two soils and compared it to the rate in three pesticide mixtures. We compared two equations to evaluate the predictors of the rate of herbicide dissipation in soil: the first-order kinetic and the non-linear empirical models. We used the non-linear empirical model assuming that the degradation rate of a herbicide in soil is proportional to the difference of the observed concentration of herbicide in soil at time and concentration of herbicide in the last day of measurement.     

Magnetic susceptibility measurements as proxy method to monitor soil pollution: the case study of S. Nicola di Melfi

The development of in situ, cheep, noninvasive, and fast strategies for soil monitoring is a crucial task for environmental research. In this paper, we present the results of three field surveys carried out in an industrial area of Southern Italy: S. Nicola di Melfi. The monitoring procedure is based on soil magnetic susceptibility measurements carried out by means of experimental protocols that our research group developed during the last years. This field surveys is supported by both geological characterization of the area and analytical determinations of metal concentrations in soils. Magnetic studies were carried out not only in situ but also in laboratory. Results show that, taking into account the influence due to the geomorphologic difference, soil magnetic susceptibility is an optimal indicator of the anthropogenic impact. So, our monitoring strategy discloses that the combined use of magnetic susceptibility measurements and soil geomorphology information may be used as a useful tool for the temporal monitoring of pollution evolution and for a fast screening of polluted zones.     

Pasture composition in a trace element-contaminated area: the particular case of Fe and Cd for grazing horses

Pasture selection by livestock is an essential topic for rangeland management, especially in trace element-contaminated soils. We have studied the composition (nutrients and trace elements) of a grass-based diet from soils affected by a mine spill at different growth stages (October 2008 to May 2009). A diet based on other plants (mainly Compositae species) was also studied (May 2009) for comparison. Faeces and mane hair of horses feeding on these pastures were also analysed. Micronutrient (Cu, Fe, Mn and Zn) and potentially toxic trace element (As, Cd, Pb, Tl) concentrations were below the maximum tolerable levels (MTL) for horses, except for Fe (at early growth of pastures) and Cd (in the diet based on ‘other’ plants). Values of potential ingestion of Fe by horses were higher than 10 mg kg body weight^− 1 day^− 1. Cadmium concentrations in some pasture samples (those composed of Compositae species) were higher than 3 mg kg^− 1. Potential toxicity of such Cd levels in pastures is uncertain, since a high disparity of criteria about MTL by cattle exists (between 0.5 and 10 mg kg^− 1 diet). Nutrient concentrations were adequate for horses, which could counteract possible harmful effects derived from trace element ingestion. The analyses of excreta and mane hair point to the low risk of toxicity derived from the consumption of these contaminated pastures. However, the ingestion of regenerating pastures (autumnal samples) should be avoided due to the greater risk of ingestion of contaminated soil attached to the plant material. Management of these pastures by grazing requires periodic monitoring. Special attention should be given to Fe and particularly Cd (non-essential element) which accumulates in animal organs, where it could provoke uncertain long-term effects.     

Sources of potentially toxic elements and organic pollutants in an urban area subjected to an industrial impact

Urban and industrial development has caused a major impact on environmental soil quality. This work assesses the extent and severity of contamination in a small urban area subjected to an industrial impact and identifies the major anthropogenic inputs. Twenty-six soil samples were collected from agricultural and urban sites, and concentrations of potentially toxic elements (As, Cd, Cu, Cr, Fe, Mn, Ni, Pb and Zn), PAHs and PCBs, were determined. In spite of the low median concentrations observed, some sites represent a potential hazard for human health and ecosystems. Concentrations of contaminants were higher than those found in a nearby city, indicating that the study area is affected by the surrounding industry. The use of multivariate statistical analyses allowed for the identification of the main factors controlling the variability of potentially toxic elements and organic pollutants in the soils. The presence of Cr, Fe, Mn and Ni was associated with geogenic inputs, and Cu, Pb, Zn, As, PAHs and PCBs were associated with anthropogenic inputs. Industry and traffic were the most important anthropogenic sources. Soil characteristics were identified as important factors controlling the spatial variability of elements, both from recognised natural and anthropogenic origin. Differences between land uses were observed, which may be attributed to both management practices and proximity to sources.     

Association between biotic and abiotic parameters and the occurrence of cyanobacteria in a Brazilian reservoir

The water reservoir of Vargem das Flores, Brazil, has been subject to eutrophication problems. The occurrence of cyanobacterial blooms in this water body has raised concerns regarding the presence of toxic metabolites. In order to understand the factors that promote the proliferation and distribution of cyanobacteria in the reservoir, physicochemical parameters, species composition, and toxicity of the reservoir water column were analyzed at monthly intervals over a 3-year period (2004-2007) using a range of analytical techniques. The results showed that cyanobacteria were absent in the dry period, returning after the onset of stratification. A succession pattern was observed within this group. The Aphanocapsa genus was dominant in the last rainy period of the study (October 2006 to March 2007). However toxicity was only detected when the genera Microcystis and Sphaerocavum were present (October 2005). The principal components analysis showed negative correlation between cyanobacteria and orthophosphate. The change of dominant cyanobacteria along the 3 years of study and the final prevalence of nontoxic genera in the reservoir is an evidence of water quality improvement in response to the management techniques implemented in the reservoir basin.     

Aircraft mass budgeting to measure CO2 emissions of Rome,Italy

Aircraft measurements were used to estimate the CO₂ emission rates of the city of Rome, assessed against high-resolution inventorial data. Three experimental flights were made, composed of vertical soundings to measure Planetary Boundary Layer (PBL) properties, and circular horizontal transects at various altitudes around the city area. City level emissions and associated uncertainties were computed by means of mass budgeting techniques, obtaining a positive net CO₂ flux of 14.7?±?4.5, 2.5?±?1.2, and 10.3?±?1.2 μmol m^?2 s^?1 for the three flights. Inventorial CO₂ fluxes at the time of flights were computed by means of spatial and temporal disaggregation of the gross emission inventory, at 10.9?±?2.5, 9.6?±?1.3, and 17.4?±?9.6 μmol m^?2 s^?1. The largest differences between the two dataset are associated with a greater variability of wind speed and direction in the boundary layer during measurements. Uncertainty partitioned into components related to horizontal boundary flows and top surface flow, revealed that the latter dominates total uncertainty in the presence of a wide variability of CO₂ concentration in the free troposphere (up to 7 ppm), while it is a minor term with uniform tropospheric concentrations in the study area (within 2 ppm). Overall, we demonstrate how small aircraft may provide city level emission measurements that may integrate and validate emission inventories. Optimal atmospheric conditions and measurement strategies for the deployment of aircraft experimental flights are finally discussed.     

Toxicity Identification Evaluation (Phase I) of water and sediment samples from a tropical reservoir contaminated with industrial and domestic effluents

The Funil Reservoir (Rio de Janeiro State, Brazil) is an environment degraded by constant discharge of nutrients and pollution coming from the most industrialized region of the country. As a consequence of eutrophication, there are continuous cyanobacteria blooms, which cause acute and chronic toxicity to zooplankton. In this context, Phase I of Toxicity Identification Evaluation (TIE) was performed on Daphnia similis using water and interstitial water from the reservoir, with the aim of identifying classes of compounds responsible for toxicity. The results indicated that water toxicity was due to cyanobacteria resulting from blooms in the reservoir and surfactants. Metals, especially copper, contributed to sediment toxicity. This research is the first attempt to describe the nature of toxicity in this reservoir using this method.     

Integrated Ambient and Microenvironment Model for Estimation of PM10 Exposures of Children in Annual and Episode Settings

Particulate matter air pollution is estimated to cause in the order of 350,000 excess deaths in the European Union calling for policy development and evaluation tools. In the current work, a model for PM₁₀ exposures of children is developed using microenvironment time activities and infiltration of ambient pollution indoors, both evaluated against observations earlier and integrated with city-wide air quality models in the current work. The model is demonstrated using data from two cities in Italy. High-end short-term exposures are characterized by an episode-day situation in Turin, and annual mean exposures in downtown Bologna. The air quality model was unable to capture the highest levels during the episode, and therefore, the exposure model was adjusted using observed–modeled ratio from a monitoring station. Air quality model performance for the annual levels was significantly better. Annual exposure variability within the target population was 1.5-fold in the downtown area Bologna and tenfold during the episode day in Turin.