Prenatal diagnosis of a double heterozygote for two reciprocal translocations of familial origin

Two balanced reciprocal translocations were found in an amniotic fluid cell culture undertaken because of maternal age. One translocation had been inherited from each parent. Both translocations were traced through three generations of each family. The importance of banding techniques in diagnostic cytogenetics is stressed.     

Increased lipid accumulation but not reduced metabolism explains improved starvation tolerance in cold-acclimated arthropod predators

Predatory arthropods are used for biological control in greenhouses, but there is increasing interest to extend their use to the outdoor environment where temperatures are typically lower. Acclimation at low temperature increases the ability of ectotherms to cope with subsequent more extreme cold, but may involve costs or benefits to other performance traits. A recent study in mesostigmatid mites (Gaeolaelaps aculeifer) showed that starvation tolerance was improved following a period of cold exposure. However, the physiological mechanisms that underlie improved starvation tolerance following cold exposure were not investigated. To examine whether cold acclimation would also improve starvation tolerance in an insect, we repeated the starvation study in another arthropod predator, the pirate bug Orius majusculus, as well as in G. aculeifer. Before tests, the two species were acclimated at 10, 15, or 20 °C for 7 (G. aculeifer) or 16 (O. majusculus) days. We then analyzed the effects of thermal exposure on body composition, consumption, and basal metabolic rate in both species. Our results confirmed that exposure to low temperature improves starvation tolerance in these arthropod predators. Body composition analyses revealed that both species had accumulated larger lipid stores during exposure to colder temperature, which at least in part can explain the larger starvation tolerance following cold exposure. In contrast, consumption and basal metabolic rate were not changed by thermal acclimation. Our study indicates that predatory arthropods exposed to cold increase their physiological robustness and ability to endure environmental challenges, including low temperature and low prey availability.     

Uncertainties related to the identification of the marginal energy technology in consequential life cycle assessments

When performing life cycle assessment (LCA) assumptions regarding the energy use are often decisive for the outcome. In this paper, current approaches of identifying marginal electricity and heat technologies for consequential LCAs are challenged. The identification of marginal energy technologies is examined from three angles: The marginal electricity technology is identified in Danish historical and potential future energy systems. The methods of identifying and using marginal electricity and heat technologies in key LCA studies are analysed. Finally, the differences in applying energy system analysis and assuming one marginal technology are illustrated, using waste incineration with energy substitution as a case. The main problem with the current approach is the use of one single marginal technology. It is recommended to use fundamentally different affected technologies and identify these in several possible and fundamentally different future scenarios. If possible, the affected technologies should also be identified based on energy system analyses considering the technical characteristics of the technologies involved. Some results in this paper may be applicable to other affected technologies than energy.     

Software sensor design based on empirical data

Software sensor design consists of building an estimate of some quantity of interest. This estimate can be used either to replace a physical measurement, or to validate an existing one. This paper provides some general guidelines for the design of software sensors based on empirical data. When the model is a priori unknown, the problem can be stated in terms of non-parametric regression or black-box modelling. Complexity control is the main difficulty in this setting. A trade-off must be achieved between two antagonist goals: the model should not be too simple, and model identification should not be too variable. We propose to address this issue by a penalization algorithm, which also estimates the relevance of input features in the identification process. A data-driven software sensor should also provide accuracy and validity indexes of its prediction. We show how these indexes can be estimated for complex non-parametric methods, such as neural networks. An application in environmental monitoring, the design of an ammonia software sensor, illustrates each step of the approach.     

Coastal erosion management and the European principles of ICZM: local versus strategic perspectives

The European Recommendation on Integrated Coastal Zone Management has six core principles. These form two groups, one concerned with strategic goals and one that has a local focus. The principles are presented as a menu of free-standing options, with no prioritization either within or between groups. In the case of coastal erosion management these characteristics result in irreconcilable conflicts, and actively hinder sustainable management of eroding coasts. The principles require clarification, and recognition that they are an indivisible integrated set which should not be used to select principles to advance a particular agenda. It is essential that the strategic principles are given priority, because only they can underpin a sustainable approach to the issue of coastal erosion.     

Two Measured Parameters Correlated to Participation Rates in Curbside Recycling Schemes in the UK

Local authorities in the United Kingdom are currently changing their approach towards recycling as they attempt to meet legislative targets. An important part of this drive is the provision of an effective curbside recycling service and it is vital to understand the parameters that influence the performance of the system offered. In this article, three primary datasets, collected from over 1400 households each, are examined for parameters correlated to participation rates. Two measured parameters were found that are not commonly identified in previous studies of curbside recycling schemes, and they are shown to merit further investigation as useful tools for planning purposes. One is the number of types of material collected; participation rates are greater for schemes collecting more materials. The second is the number of households situated on the same road; the lower the number, the higher the participation rate. In both cases, evidence of the measured correlation is presented, justifying their usefulness for planning. The multiple underlying factors causing the correlations are not identified here, but suggestions are made for further studies.     

Linking chemical elements in forest floor humus (Oh-horizon) in the Czech Republic to contamination sources

While terrestrial moss and other plants are frequently used for environmental mapping and monitoring projects, data on the regional geochemistry of humus are scarce. Humus, however, has a much larger life span than any plant material. It can be seen as the “environmental memory” of an area for at least the last 60-100 years. Here concentrations of 39 elements determined by ICP-MS and ICP AES, pH and ash content are presented for 259 samples of forest floor humus collected at an average sample density of 1 site/300 km² in the Czech Republic. The scale of anomalies linked to known contamination sources (e.g., lignite mining and burning, metallurgical industry, coal fired power plants, metal smelters) is documented and discussed versus natural processes influencing humus quality. Most maps indicate a local impact from individual contamination sources: often more detailed sampling than used here would be needed to differentiate between likely sources.     

PCDD/F, PCB, PBDE, HBCD and chlorinated pesticides in a Swedish market basket from 2005--levels and dietary intake estimations

Based on consumption data statistics, food items from four regions in Sweden were sampled in a so-called market basket study. Food items from five food groups, i.e. fish, meat, dairy products, eggs and fat/oils, were analyzed for persistent organic pollutants (POPs) followed by per capita intake calculations. The highest levels of PCDD/F, PCB, PBDE, HBCD and chlorinated pesticides were found in the fish/fish products. The estimated market basket per capita intake of PCDD/F and dl-PCB was 0.7 pg WHO-TEQ kg bw⁻¹ d⁻¹ (TEFs from 1998). The intake of ∑PCB was estimated to 4.9 ng kg bw⁻¹ d⁻¹ and fish was found to be the major contributor with 64%. The intake of ∑PBDE was found to be 0.7 ng kg bw⁻¹ d⁻¹. Fish (38%) and dairy products (31%) were the largest contributors to the total PBDE intake. The intake of HBCD was estimated to 0.14 ng kg bw⁻¹ d⁻¹. HBCD mainly came from fish (65%), but also dairy products (24%) and meat (10%) contributed. Also regarding the chlorinated pesticides, fish was found to be the major contributor, with 51% of the ∑DDT coming from fish. The intake of ∑DDT, ∑HCH and HCB was 4.0, 1.0 and 1.1 ng kg bw⁻¹ d⁻¹, respectively. Most of the ∑HCH and HCB originate from dairy products (43% and 55%, respectively). This study shows that the levels, and intake, of different POPs from food of animal origin in the market basket of 2005 seem to have decreased since the market basket study in 1999.     

Promoting the use of crumb rubber concrete in developing countries

The use of accumulated waste materials in third world countries is still in its early phases. It will take courage for contractors and others in the construction industry to recycle selected types of waste materials in the concrete mixes. This paper addresses the recycling of rubber tires accumulated every year in Jordan to be used in concrete mixes. The main objectives of this research were to provide more scientific evidence to support the use of legislation or incentive-based schemes to promote the reuse of accumulated waste tires. This research focused on using crumb tires as a replacement for a percentage of the local fine aggregates used in the concrete mixes in Jordan. Different concrete specimens were prepared and tested in terms of uniaxial compression and splitting tension. The main variable in the mixture was the volumetric percentage of crumb tires used in the mix. The test results showed that even though the compressive strength is reduced when using the crumb tires, it can meet the strength requirements of light weight concrete. In addition, test results and observations indicated that the addition of crumb rubber to the mix has a limited effect toward reducing the workability of the mixtures. The mechanical test results demonstrated that the tested specimens of the crumb rubber concrete remained relatively intact after failure compared to the conventional concrete specimens. It is also concluded that modified concrete would contribute to the disposal of the non-decaying scrap tires, since the amount being accumulated in third world countries is creating a challenge for proper disposal. Thus, obliging authorities to invest in facilitating the use of waste tires in concrete, a fundamental material to the booming construction industry in theses countries, serves two purposes.