Vegetation associated with different walking track types in the Kosciuszko alpine area, Australia

Tourism infrastructure such as walking tracks can have negative effects on vegetation including in mountain regions. In the alpine area around continental Australia's highest mountain, Mt Kosciuszko (2228 m), there is a range of walking tracks (paved, gravel and raised steel mesh surfaces) in addition to an extensive network of informal/non-hardened tracks. Vegetation characteristics were compared between track types on/under tracks, on the track verge, and in the adjacent native vegetation. For a raised steel mesh walkway there was no difference in vegetation under the walkway, on the verge, and 3m away. In contrast, for a non-hardened track there was 35% bare ground on the track surface but no other detectable impacts. Gravel and paved tracks had distinct verges largely comprising bare ground and exotic species. For non-hardened tracks there was an estimated 270 m2 of disturbance per km of track. For wide gravel tracks the combined area of bare ground, exotic plants and gravel was estimated as 4290 m2 per km, while for narrow gravel tracks it was estimated as 2940 m2 per km. For paved tracks there was around 2680 m2 per km of damage. In contrast, there was no detectable effect of raised steel mesh walkway on vegetation highlighting some of the benefits of this surface over other track types.     

Degradation of polycyclic aromatic hydrocarbons by combined chemical pre-oxidation and bioremediation in creosote contaminated soil

The ability of pre-oxidation to overcome polycyclic aromatic hydrocarbons (PAH) recalcitrance to biodegradation was investigated in creosote contaminated soil. Sand and peat artificially spiked with creosote (quality WEI C) were used as model systems. Ozonation and Fenton-like treatment were proved to be feasible technologies for PAH degradation in soil. The efficiency of ozonation was strongly dependent on the water content of treated soil samples. The removal of PAH by Fenton-like treatment depended on the applied H2O2/soil weight ratio and ferrous ions addition. It was determined that the application of chemical oxidation in sand resulted in a higher PAH removal and required lower oxidant (ozone, hydrogen peroxide) doses. The enhancement of PAH biodegradability by different pre-treatment technologies also depended on the soil matrix. It was ascertained that combined chemical and biological treatment was more efficient in PAH elimination in creosote contaminated soil than either one alone. Thus, the combination of Fenton-like and the subsequent biological treatment resulted in the highest removal of PAH in creosote contaminated sand, and biodegradation with pre-ozonation was found to be the most effective technology for PAH elimination in peat.     

The passion bug: How and when do leaders inspire work passion?

Drawing from signaling theory, we propose a work passion transfer model where leaders' passion is transmitted to employees through the former's leadership style and is contingent on employees' perceived importance of performance to self-esteem (IPSE). Data from 201 supervisor–employee dyads from the health-care industry show that leaders' harmonious passion led to employees' harmonious passion through charismatic leadership, whereas contingent reward leadership accounted for the transfer of obsessive passion; IPSE did not play a moderating role for either form of passion. Results from a supplementary study further reveal that the link between leadership and employee passion operated through employees' perception of leader passion and that employees' IPSE accentuated for the relationship between perceived leader obsessive passion and employees' obsessive passion. This study advances research in work passion, leadership, and signaling theory and provides important implications for managerial practice.     

Design,Modelling and Assessment of Emission Scenarios Resulting from a Network of Wood Biomass Boilers

The use of wood biomass as a fuel for domestic and industrial heating systems allows for a reduction of CO₂ emissions at a global scale, but it may also result in worse local air quality conditions, due to their emissions of particulate matter. The aim of this study is to assess the actual trend of atmospheric pollution in a study area, assuming that all heating systems are replaced by small size biomass boilers linked to the buildings through district heating network. Ground level concentrations of particulate matter, emitted by different heating systems, are therefore evaluated through numerical simulations performed by means of an atmospheric dispersion model (Sirane). As a first step, we have compared the environmental impact of a woodchip boilers network with that given by the use of traditional heating systems, i.e. wood stoves and natural gas boilers. As a second step, we have analysed the impact of such a network taking into account different emission scenarios, related to different boilers operating conditions. Results show that the environmental performances of a woodchip boilers network can be optimized by combining it with other renewable sources of energy devoted to the supply of hot water. The adopted analysis methodology can be applied to other real or hypothetic punctual sources on the territory.     

Sociodemographic, reproductive and dietary predictors of organochlorine compounds levels in pregnant women in Spain

Organochlorine pesticides and polychlorinated biphenyls (PCBs) are consistently found in human tissues. Serum levels of organochlorine compounds (OC) in pregnant women in particular have raised concern about possible harm to humans in the early phases of physical and behavioural development. The objective of the present study was to evaluate the association between concentration of OCs in serum of two cohorts of pregnant women from Gipuzkoa and Sabadell in Spain and socioeconomic, reproductive and dietary variables. Concentration of polychlorinated biphenyls (PCBs: 28, 52, 101, 118, 138, 153 and 180), hexachlorobenzene (HCB), beta and gamma-hexachlorocyclohexane (β-HCH and γ-HCH), heptachlor epoxide, dichlorodiphenyl dichloroethylene (p,p'-DDE) and dichlorodiphenyl trichloroethane (p,p'-DDT) were measured in the serum of 1259 pregnant women. Associations between OCs and potential predictor variables were assessed using linear regression models adjusted for potential confounders. The compounds most commonly found in the serum were p,p'-DDE (99% of the samples) and PCB-153 (95% of the samples). Geometric means of serum concentrations (ng g?1 lipid) of organochlorine pesticides were 110.0, 19.1, and 33.5 for p,p'-DDE, β-HCH, and HCB respectively, while the geometric means of PCBs were 21.8, 38.9 and 26.9 for PCB 138, 153, and 180 respectively. The levels of all OCs increased with age. BMI was positively associated with the concentration of organochlorine pesticides but inversely related to PCB concentrations. The serum levels of OCs fell only after a cumulative period of breastfeeding of over a year. Levels of PCBs were related to fish intake, but in general dietary factors did not improve the explained variability of the concentrations of OCs. Overall, the levels of OCs found in the study are at the lower end of the range reported in Spain and other countries.     

Measurement of organic nitrogen and phosphorus fractions at very low concentrations in wastewater effluents

The purpose of this study was to develop simple, accurate, and inexpensive measurement protocols for dissolved organic nitrogen (DON) and dissolved non-reactive phosphorus (DNRP) at low levels in wastewater effluents. Two protocols are presented--one to measure DON exclusively, and the other to measure DON and DNRP simultaneously. Currently, DON and DNRP are calculated indirectly by subtracting the dissolved inorganic fractions from the total dissolved concentration, resulting in significant errors. To increase the accuracy of DON measurements, effluent sample pretreatment using ion exchange to remove nitrate was applied. Spectrometric methods were selected to measure the inorganic fractions-the second derivative UV spectroscopy method for nitrate, and the malachite green method for orthophosphate. These methods, combined with the optimized persulfate digestion of the samples, can be used to measure total dissolved nitrogen and phosphorus accurately. The measurement ranges attained were 0.05 to 3 mg N/L for DON and 0.01 to 0.5 mg P/L for DNRP.     

Comparative effect of organic amendments on physio-biochemical traits of young and old bean leaves grown under cadmium stress: a multivariate analysis

Environmental Science and Pollution Research - The current study investigated the influence of organic amendments on cadmium (Cd) uptake and its effects on biochemical attributes of young and old...     

Evolution of tolerance to PCBs and susceptibility to a bacterial pathogen (Vibrio harveyi) in Atlantic killifish (Fundulus heteroclitus) from New Bedford (MA, USA) harbor

A population of the non-migratory estuarine fish Fundulus heteroclitus (Atlantic killifish) resident to New Bedford (NB), Massachusetts, USA, an urban harbor highly contaminated with polychlorinated biphenyls (PCBs), demonstrates recently evolved tolerance to some aspects of PCB toxicity. PCB toxicology, ecological theory, and some precedence supported expectations of increased susceptibility to pathogens in NB killifish. However, laboratory bacterial challenges of the marine pathogen Vibrio harveyi to wild fish throughout the reproductive season and to their mature laboratory-raised progeny demonstrated comparable survival by NB and reference killifish, and improved survival by NB males. These results are inconsistent with hypothesized trade-offs of adaptation, and suggest that evolved tolerance in NB killifish may include mechanisms that minimize the immunosuppressive effects of PCBs. Compensatory strategies of populations persisting in highly contaminated environments provide a unique perspective for understanding the long-term ecological effects of toxic chemicals.     

Choice of parameters for passive shielding of power-frequency magnetic fields

Epidemiological studies suggesting the possibility of harmful effects on human (specifically children’s leukaemia) due to long-term exposure to magnetic fields of extremely low frequency (e.g. 50/60 Hz) and relatively low values (i.e. over the microtesla range) have stirred high activity in the topic of magnetic field mitigation. To reduce these fields, it is common to use passive metal screens (e.g. plates made of aluminium or steel). To design them, effective and fast numerical computations are highly desirable. In this article, a method is presented, which computes various parameters of screens in a given shielding problem and yields magnetic field distribution and shielding factors. The method takes into consideration the 3D field distribution and is able to solve systems with large aspect ratios (thin thickness in comparison with its other dimensions); this is a common problem where other methods such as finite elements often experience difficulties. The presented method computes separately the field inside and outside the screens. Afterwards, the solutions are “stitched” together along the border of the subregions. Two practical examples are given of the developed numerical method.