Microbial degradation of methyl tert-butyl ether and tert-butyl alcohol in the subsurface

The fate of fuel oxygenates such as methyl tert-butyl ether (MTBE) in the subsurface is governed by their degradability under various redox conditions. The key intermediate in degradation of MTBE and ethyl tert-butyl ether (ETBE) is tert-butyl alcohol (TBA) which was often found as accumulating intermediate or dead-end product in lab studies using microcosms or isolated cell suspensions. This review discusses in detail the thermodynamics of the degradation processes utilizing various terminal electron acceptors, and the aerobic degradation pathways of MTBE and TBA. It summarizes the present knowledge on MTBE and TBA degradation gained from either microcosm or pure culture studies and emphasizes the potential of compound-specific isotope analysis (CSIA) for identification and quantification of degradation processes of slowly biodegradable pollutants such as MTBE and TBA. Microcosm studies demonstrated that MTBE and TBA may be biodegradable under oxic and nearly all anoxic conditions, although results of various studies are often contradictory, which suggests that site-specific conditions are important parameters. So far, TBA degradation has not been shown under methanogenic conditions and it is currently widely accepted that TBA is a recalcitrant dead-end product of MTBE under these conditions. Reliable in situ degradation rates for MTBE and TBA under various geochemical conditions are not yet available. Furthermore, degradation pathways under anoxic conditions have not yet been elucidated. All pure cultures capable of MTBE or TBA degradation isolated so far use oxygen as terminal electron acceptor. In general, compared with hydrocarbons present in gasoline, fuel oxygenates biodegrade much slower, if at all. The presence of MTBE and related compounds in groundwater therefore frequently limits the use of in situ biodegradation as remediation option at gasoline-contaminated sites. Though degradation of MTBE and TBA in field studies has been reported under oxic conditions, there is hardly any evidence of substantial degradation in the absence of oxygen. The increasing availability of field data from CSIA will foster our understanding and may even allow the quantification of degradation of these recalcitrant compounds. Such information will help to elucidate the crucial factors of site-specific biogeochemical conditions that govern the capability of intrinsic oxygenate degradation.     

Use of organic coagulant/flocculant for treatment of effluents generated in intensive rearing of swine

Separation of water for reuse is essential in an effluent treatment system, especially in activities with high water consumption, such as a pig production system. The objective of this work was to evaluate the efficiency of Tanfloc SG^® coagulant tannin/organic flocculant used to treat effluent generated during the intensive rearing of swine. For the evaluation, laboratory and in situ tests (field test) were performed. The laboratory tests were performed to define the concentration (1 and 16%), dosage (0, 0.1, 0.2, 0.3, 0.4, 0.5, 1.0, 2.0, 4.0, 8.0, and 16.0 milliliters of the solution), and time (24, 48, 72, and 96 hours) of coagulation/flocculation treatment of the solid portion of the effluent. The parameters pH, turbidity, oxidation reduction potential, dissolved oxygen, and electroconductivity (in microsiemens per centimeter) were evaluated using a multiparameter probe and the parameters ammonia (NH₃), nitrate (NO₃), and nitrite (NO₂) in the laboratory, in relation to the coagulation/flocculation time of the solid part of the effluent. The use of tannin as a coagulant/flocculant of plant origin in the treatment of swine effluents was effective in reducing turbidity and concentrations of ammonia, nitrite, and nitrate, and it allowed separation of the solid–liquid phase in approximately 68% as liquid phase.     

Removal of carbofuran is not affected by co-application of chlorpyrifos in a coconut fiber/compost based biomixture after aging or pre-exposure

Biomixtures constitute the biologically active part of biopurification systems(BPS), which are used to treat pesticide-containing wastewater. The aim of this work was to determine whether co-application of chlorpyrifos(CLP) affects the removal of carbofuran(CFN)(both insecticide/nematicides) in a coconut fiber–compost–soil biomixture(FCS biomixture), after aging or previous exposure to CFN. Removal of CFN and two of its transformation products(3-hydroxycarbofuran and 3-ketocarbofuran) was enhanced in pre-exposed biomixtures in comparison to aged biomixtures. The co-application of CLP did not affect CFN removal, which suggests that CLP does not inhibit microbial populations in charge of CFN transformation.Contrary to the removal behavior, mineralization of radiolabeled14C-pesticides showed higher mineralization rates of CFN in aged biomixtures(with respect to freshly prepared or pre-exposed biomixtures). In the case of CLP, mineralization was favored in freshly prepared biomixtures, which could be ascribed to high sorption during aging and microbial inhibition by CFN in pre-exposure. Regardless of removal and mineralization results, toxicological assays revealed a steep decrease in the acute toxicity of the matrix on the microcrustacean Daphnia magna(over 97%) after 8 days of treatment of individual pesticides or the mixture CFN/CLP.Results suggest that FCS biomixtures are suitable to be used in BPS for the treatment of wastewater in fields where both pesticides are employed.     

Computer image generation for job simulation: An effective approach to occupational Risk Analysis

The paper deals with the general approach and features of the computer image generation for job simulation (CIGJS) method, as specially developed to support the Job Safety Analysis (JSA) technique.Starting from some general considerations on the occupational safety and health statistical data collection in Italy, when compared to US methodology, the paper provides an overview of the CIGJS method, developed to improve the effectiveness and usability of the traditional JSA.A case study is discussed in order to highlight how CIGJS makes the use of the JSA technique possible also at the design stage (this being fundamental according to a Prevention through Design approach), and allows to control the effectiveness of the adopted countermeasures.The application of the method complies with the basic European Directives requirements both on workers’ safety and health and on machinery analysis.Furthermore, CIGJS may substantially aid workers’ education and training, to the point of being a possible simulation-training device.     

Catalytic activity of NiW electrodeposits

NiW systems are known as one of the best catalysts for various desulfurization processes. In this study, we examined catalytic properties of NiW electrodeposits, produced from two different electrolytes, towards sulfide ion oxidation in alkaline solution. Despite the big difference in morphology and structure of both materials, they exhibit almost the same catalytic activity for the examined reaction. A possible explanation of this experimental fact is that the overall reaction is controlled by the transport of oxygen through the catalyst samples.     

Pulsed gas injection: A minimum effort approach for enhanced natural attenuation of chlorobenzene in contaminated groundwater

Chlorobenzene-contaminated groundwater was used to assess pulsed gas sparging as a minimum effort aeration strategy to enhance intrinsic natural attenuation. In contrast to existing biosparging operations, oxygen was supplied at minimum rate by reducing the gas injection frequency to 0.33 day^?1. Field tests in a model aquifer were conducted in a 12 m long reactor, filled with indigenous aquifer material and continuously recharged with polluted groundwater over 3 years. The closed arrangement allowed yield balances, cost accounting as well as the investigation of spatial distributions of parameters which are sensitive to the biodegradation process. Depending on the injection frequency and on the gas chosen for injection (pure oxygen or air) oxygen-deficient conditions prevailed in the aquifer. Despite the limiting availability of dissolved oxygen in the groundwater, chlorobenzene degradation under oxygen-deficient conditions proved to be more effective than under conditions with dissolved oxygen being available in high concentrations.