Mycelium growth and degradation of creosote-treated wood by basydiomycetes

Tolerance of wood decay fungi of the genera Agrocybe, Armillaria, Auricularia, Daedalea, Pleurotus, Trametes to the presence of various amounts of creosote-treated wood (CTW) in the growth medium was compared. In the case of the most tolerant strain, Pleurotus ostreatus SMR 684, extracellular laccase and peroxidase specific activities were monitored during growth in the presence of CTW. Degradation of various creosote-constituting polycyclic aromatic hydrocarbons by this strain was evaluated by GC-MS and the ecotoxicity of treated and untreated CTW was compared by Microtox test.     

Environmental release and mass flux partitioning of PCDD/Fs during normal and transient operation of full scale waste to energy plants

The paper reports on global release and mass partitioning in the flux of residues of PCDD/Fs, evaluated with dedicated field campaigns at a municipal solid waste incineration plant during normal and transient operation. Results are compared with those obtained in other installations equipped with furnaces, energy recovery options and flue gas treatment technologies representative of most of the European incineration plants currently in operation. Levels of the pollutants of interest were determined in all the solid, liquid and gaseous residues produced by every single facility, and the results analysed in terms of the effects arising from the fed waste and the configuration of the plant. PCDD/Fs total release between 1.5 and 45 microg I-TEQ per ton of burned waste was evaluated, with lower values resulting from the adoption of catalytic conversion process for flue gas treatment. Most of the mass flux emitted is associated with solid residues deriving from activated carbon PCCD/F dry removal options, with significant contributions also from fly ash produced by particulate removal devices located immediately downstream the boiler and from scrubber blowdowns treatment sludge. During transient operating conditions the dioxin total release may increase by 50% with comparison to steady-state functioning.     

Distribution of Cd and As in organs and tissues of four marine mammal species stranded along the Italian coasts

Concentrations of Cd and As were determined in organs and tissues (muscle, heart, kidney, lung and liver) of four cetacean species (Stenella coeruleoalba, Truncatus truncatus, Grampus griseus and Ziphius cavirostris) stranded along the Italian coasts during the period 2000-2009. Significant differences were found between Cd concentrations in the different analysed tissues. Particularly, the kidney shows the highest concentrations of Cd in all analysed specimens, followed by the liver. No systematic or statistically significant difference in As concentrations was found in the analysed tissues. Considerable differences of Cd and As values in samples from different geographical areas (Sicily Channel, Adriatic Sea and Tyrrhenian Sea) were found, with the highest values measured in samples from the Sicily Channel. This basically suggests that anthropogenic and natural sources significantly affect Cd and As content in cetaceans.     

Land poverty and emerging ruralities in Cambodia: insights from Kampot province

Rural change in Cambodia manifests itself in rapidly declining land availability for the smallholder sector, posing the question of how farmers may be able to deal with limited access to land. In this paper, we discuss with a case study village and household livelihood strategies of smallholders currently operating under land-constrained conditions. Based on an integrated assessment of a smallholder village in Kampot province, we illustrate in quantitative terms how land shortage is creating problems of surplus generation and liquidity issues in monetary and non-monetary flows. At the household level, livelihood diversification based on the involvement of productive resources other than land may play an increasing role, particularly in the future, when levels of land shortage may increase. At the village level, smallholder may respond through institutional innovation, in particular through the establishment of a community banking system and a paddy rice bank to provide money and rice credits to overcome transitory shortages and to cover investment costs for additional productive resources. Thus, in this case, we observe the emergence of new patterns of livelihood in rural areas, based on the integration of non-land-based economic activities and new institutional settings.     

Visible-light driven oxidation of gaseous aliphatic alcohols to the corresponding carbonyls via TiO2 sensitized by a perylene derivative

Sensitized P25 TiO₂ was prepared by wet impregnation with a home-prepared perylene dye, i.e., N,N′-bis(2-(1-piperazino)ethyl)-3,4,9,10-perylene-tetracarboxylic acid diimide dichloride (PZPER). Energy levels of PZPER were found to be compatible with those of TiO₂ allowing fast electron transfer. The obtained catalyst has been characterized and used in the gas-phase partial oxidation of aliphatic primary and secondary alcohols, i.e., methanol, ethanol, and 2-propanol. The reaction was carried out under cut-off (λ?>?400 nm) simulated solar radiation in O₂ atmosphere. The perylene derivative allowed a good absorbance of visible radiation thanks to its low optical energy gap (2.6 eV) which was evaluated by cyclic voltammetry. The optimal organic sensitizing amount was found to be 5.6 % w/w in terms of yield in carbonyl derivatives. Moreover, no change in reactivity/selectivity was observed after 10-h irradiation thus confirming the catalyst stability. Yields into formaldehyde, acetaldehyde, and acetone were 67, 70, and 96 %, respectively. No significant amounts of organic byproducts were detected but for methanol oxidation, whereas a minor amount of the substrate degraded to CO₂.     

What Is the Potential Measurement Error in Occupational Exposure Studies?

ABSTRACT

This paper demonstrates statistical methods that estimate measurement error from available industrial hygiene data. Errors in measuring a continuous exposure variable may arise when all individuals in a work area are assigned the same exposure. An example is when the mean of exposure measurements obtained on a sample of individuals is assigned to all workers with similar jobs. This may lead to inaccurate point and interval estimates in exposure-response modeling. A method of simulating the distribution of true (i.e., unobserved) individual exposures is described in order to estimate the mean and variance of measurement error. The minimum variance unbiased estimator approximates the mean of lognormally distributed exposure measurements. The distribution of true individual exposures is approximated by the distribution of simulated estimates of mean exposure. The methodology is illustrated by exposure data from work areas manufacturing refractory ceramic fiber (RCF) and RCF products. Results show that exposure is slightly underestimated in work areas with between 25 and 113 exposure measurements; measurement error variance averages about 1.3% of the total variance.     

Chemical Characterization of Soil Used as a Deposit for Waste Originating From the Manufacturing of Products Based on Fiberglass

Companies need to follow environmental laws as they affect their manufacturing systems, waste handling, and the management of soil on their properties to ensure that their properties are either improved or altered as little as possible. Thus, the objective of this study was to evaluate the use of energy dispersive X‐ray fluorescence spectrometry (EDXRF) to determine the concentrations of elements present in the soil at a manufacturer of products based on fiberglass where wastes from production activities have been deposited on the property.     

Waste prevention for sustainable resource and waste management

Although the 2Rs (reduce and reuse) are considered high-priority approaches, there has not been enough quantitative research on effective 2R management. The purpose of this paper is to provide information obtained through the International Workshop in Kyoto, Japan, on 11–13 November 2015, which included invited experts and researchers in several countries who were in charge of 3R policies, and an additional review of 245 previous studies. It was found that, regarding policy development, the decoupling between environmental pressures and economy growth was recognized as an essential step towards a sustainable society. 3R and resource management policies, including waste prevention, will play a crucial role. Approaches using material/substance flow analyses have become sophisticated enough to describe the fate of resources and/or hazardous substances based on human activity and the environment, including the final sink. Life-cycle assessment has also been developed to evaluate waste prevention activities. Regarding target products for waste prevention, food loss is one of the waste fractions with the highest priority because its countermeasures have significant upstream and downstream effects. Persistent organic pollutants and hazardous compounds should also be taken into account in the situation where recycling activities are globally widespread for the promotion of a material-cycling society.