Taking advantage of storm and waste water retention basins as part of water use minimization in industrial sites

A methodology for water use minimization has been developed by the Clean Technology Network of Bahia over a 10 year period in joint cooperative programs with the chemical, petrochemical and copper metallurgy industries located in the largest Industrial Complex in Latin America, in Camaçari, Bahia, Brazil. The methodology comprises a set of tools including reconciled aqueous stream balances, database of aqueous streams; large scale training leading to the identification of water minimization alternatives in the processes, water reuse optimization approaches; geographical information systems as well as, consideration of the region's hydro and hydro-geological characteristics. The results of a study carried out to assess the possibility of using storm and wastewaters for industrial use is presented in this paper. The inorganic system is composed by three water reservoirs (basins) receiving stormwater contaminated with inorganic effluents, and occasionally with organics. These basins have been operated to control water flow inputs according to the capacity of the pumping outlet systems before their discharge to a submarine outfall. A mass balance was performed with historical updated data to assess water availability from the basins based on the daily volume variation and flow rate of inorganic effluent from 2001 to 2007. The study identified the possibility of recovering about 1140 m³/h of the overall 5400 m³/h consumed by the Industrial Complex at the moment. Organizational changes in the present effluent disposal and stormwater harvest systems will be required in order to maximize water recovery for industrial use.     

Design of a new monitoring network and first testing of new biological assessment methods according to water framework directive

In most European member states, more or less completely new monitoring networks and assessment methods had to be developed as basic technical tools for the implementation of the EU Water Framework Directive (WFD). In the river basin of the Stever, the largest tributary to the river Lippe (River Rhine, Northrhine-Westphalia, Germany), a WFD-monitoring network was developed, and new German biological methods for rivers, developed for the purposes of the WFD, have been applied. Like most rivers in the German lowland areas, nearly all the river courses of the Stever system are altered by hydro-morphological degradation (straightening, bank fixation, lack of canopy etc.). In 2005 and 2006, the biological quality components of macroinvertebrates, fish and macrophytes were investigated and evaluated for the assessment of the ecological status of about 50 surface water bodies within the whole Stever system. Basic physical and chemical parameters, as well as priority substances, have been analysed in the same period. In this contribution, the design of the new monitoring network, the core principles of the German biological methods, and the most important results of the pilot monitoring will be presented. As main impacts with severe effects on the faunal and floral communities, the many migration barriers and the bad quality of the river morphology could be stated. Organic pollution is no more a severe problem in the Stever. The pilot project was successfully conducted in close collaboration with the water authorities (District Government Münster) and the water association Lippeverband.     

A field trial to assess the performance of CO2-supersaturated water injection for residual volatile LNAPL recovery

A pilot scale field trial was conducted to evaluate the recovery of volatile, light non-aqueous phase liquids (LNAPLs) using a novel remediation method termed supersaturated water injection (SWI). SWI uses a patented technology to efficiently dissolve high concentrations of CO₂ into water at elevated pressures. This water is injected into the subsurface resulting in the nucleation of CO₂ bubbles at and away from the injection point. The nucleating bubbles coalesce, rise and volatilize residual LNAPL ganglia. In this study, an LNAPL composed of 103 kg of volatile pentane and hexane, and 30 kg of non-volatile Soltrol was emplaced below the water table at residual saturation. The SWI technology removed 78% of the pentane and 50% of the less volatile hexane. Contaminant mass was still being removed when the system was shut down for practical reasons. The mass removed is comparable to that expected for air sparging but a much smaller volume of gas was injected using the SWI system.     

Determination of naturally occurring MTBE biodegradation by analysing metabolites and biodegradation by-products

Methyl tert-butyl ether (MTBE) is one of the main additives in gasoline. Its degradation is known to be difficult in natural environments. In this study, significant MTBE degradation is demonstrated at a contaminated site in Leuna (eastern Germany). Since the extent of the plume appeared to be constant over the last 5 years, an extended study was performed to elucidate the degradation processes. Special attention was paid to the production, accumulation and degradation of metabolites and by-products. Groundwater samples from 105 monitoring wells were used to measure 20 different substances. During the degradation process, several intermediates such as tert-butyl alcohol (TBA), tert-butyl formate, formate and lactate were produced. However, the potentially carcinogenic by-product methacrylate was not detected in several hundred samples. At the Leuna site, MTBE degradation occurred under microaerobic conditions. In contrast to hydrocarbons and BTEX, there was no evidence for anaerobic MTBE degradation. Among the degradation products, TBA was found to be a useful intermediate to identify MTBE degradation, at least under microaerobic conditions. TBA accumulation was strongly correlated to MTBE degradation according to the kinetic properties of both degradation processes. Since maximum degradation rates (v(max)) and k(m) values were higher for MTBE (v(max)=2.3 mg/l/d and k(m)=3.2 mg/l) than for TBA (v(max)=1.35 mg/l/d and k(m)=0.05 mg/l), TBA significantly accumulated as an intermediate by-product. The field results were supported by bench scale model aquifer experiments.     

Potentiation of antifungal effect of a mixture of two antifungal fractions obtained from Baccharis glutinosa and Jacquinia macrocarpa plants

The aim of the present work was to evaluate the effect of mixtures of antifungal fractions extracted from Baccharis glutinosa and Jacquinia macrocarpa plants on the development of the filamentous fungi Aspergillus flavus and Fusarium verticillioides. The minimal inhibitory concentration that inhibited 50% of growth (MIC₅₀) of each plant antifungal fraction was determined from the percentage radial growth inhibition of both fungi. Binomial mixtures made with both plant fractions were used at their MIC₅₀ to determine the Fractional Inhibitory Concentration index (FIC index) for each fungus in order to evaluate their synergistic effect. Each synergistic mixture was analyzed in their effect on spore germination, spore size, spore viability, mitotic divisions, hyphal diameter and length, and number of septa per hypha. Some antifungal mixtures, even at low concentrations, showed higher antifungal effect than those of the individual antifungal fraction. The FIC indices of mixtures that showed the highest antifungal activity against A. flavus and F. verticillioides were 0.5272 and 0.4577, respectively, indicating a synergistic effect against both fungi. Only 12% and 8% of the spores of A. flavus and F. verticillioides, respectively, treated with the synergistic mixtures, were able to germinate, although their viability was not affected. An increase in the number of septa per hypha of both fungi was observed. The results indicated that the synergistic mixtures strongly affected the fungal growth even at lower concentrations than those of the individual plant fractions.     

Toxicity of leather tanning wastewater effluents in sea urchin early development and in marine microalgae

This study was designed to investigate the composition and the toxicity of leather tanning wastewater and conditioned sludge collected at the leather tanning wastewater treatment plant (CODISO) located in Solofra, Avellino (Southern Italy). Samples were analyzed for their conventional parameters (COD, TSS, chromium and ammonia) and for metal content. Effluent samples included raw wastewater, and samples collected following coagulation/flocculation process and biological treatment. A set of toxicity endpoints were tested using sea urchin and marine microalgal bioassays by evaluating acute embryotoxicity, developmental defects, changes in sperm fertilization success and transmissible damage from sperm to the offspring, and changes in algal growth rate. Dose-related toxicity to sea urchin embryogenesis and sperm fertilization success was exerted by effluent or sludge samples according to the following rank: conditioned sludge > coagulated effluent > or = raw influent > effluent from biological treatment. Offspring quality was not affected by sperm exposure to any wastewater or to sludge samples. Algal growth was inhibited by raw or coagulated effluent to a similar extent and, again, the effluent from the biological treatment resulted in a decreased toxicity. The results suggest that coagulated effluent and conditioned sludge result in higher toxicity than raw influent in sea urchin embryos and sperm, whereas the biological wastewater treatment of coagulated effluent, in both sea urchins and algae, cause a substantial improvement of wastewater quality. Hence a final biological wastewater treatment should be operated to minimize any environmental damage from tannery wastewater.