A review of approaches for the long-term management of municipal solid waste landfills

After closure, municipal solid waste (MSW) landfills must be managed and controlled to avoid adverse effects on human health and the environment (HHE). Aftercare (or post-closure care) can be brought to an end when the authorities consider the landfill to no longer pose a threat to HHE. Different approaches have been suggested for long-term landfill management and evaluation of aftercare completion. In this paper, research on aftercare and its completion is analyzed and regulatory approaches for the completion of landfill aftercare are reviewed. Approaches to aftercare could be categorized as (i) target values, (ii) impact/risk assessment, and (iii) performance based. Comparison of these approaches illustrates that each has limitations and strengths. While target values are typically used as screening indicators to be complemented with site-specific assessments, impact/risk assessment approaches address the core issue about aftercare completion, but face large uncertainties and require a high level of expertise. A performance-based approach allows for the combination of target values and impact/risk assessments in a consistent evaluation framework with the aim of sequentially reducing aftercare intensity and, ultimately, leading to the completion of aftercare. At a regulatory level, simple qualitative criteria are typically used as the primary basis for defining completion of aftercare, most likely due to the complexity of developing rigorous evaluation methodologies. This paper argues that development of transparent and consistent regulatory procedures represents the basis for defining the desired state of a landfill at the end of aftercare and for reducing uncertainty about the intensity and duration of aftercare. In this context, recently presented technical guidelines and the ongoing debate with respect to their regulatory acceptance are a valuable step towards developing strategies for the cost-effective protection of HHE at closed MSW landfills. To assess the practicality of evaluation methodologies for aftercare, well-documented case studies including regulatory review and acceptance are needed.     

Sustaining Visitor Use in Protected Areas: Future Opportunities in Recreation Ecology Research Based on the USA Experience

Recreation ecology, the study of environmental consequences of outdoor recreation activities and their effective management, is a relatively new field of scientific study having emerged over the last 50 years. During this time, numerous studies have improved our understanding of how use-related, environmental and managerial factors affect ecological conditions and processes. Most studies have focused on vegetation and soil responses to recreation-related trampling on trails and recreation sites using indicators such as percent vegetation cover and exposed mineral soil. This applied approach has and will continue to yield important information for land managers. However, for the field to advance, more attention needs to be given to other ecosystem attributes and to the larger aspects of environmental conservation occurring at landscape scales. This article is an effort at initiating a dialog on needed advances in the field. We begin by reviewing broadly generalizable knowledge of recreation ecology, to separate what is known from research gaps. Then, based on the authors’ perspective of research in the USA and North America, several research directions are suggested as essential for continued progress in this field including theoretical development, broadening scale, integration with other disciplines, and examination of synergistic effects.     

Elemental analysis of printed circuit boards considering the ROHS regulations

The EU RoHS Directive (2002/95/EC of the European Parliament and of the Council) bans the placing of new electrical and electronic equipment containing more than agreed levels of lead, cadmium, mercury, hexavalent chromium, polybrominated biphenyl (PBB) and polybrominated diphenyl ether (PBDE) flame retardants on the EU market. It necessitates methods for the evaluation of RoHS compliance of assembled electronic equipment. In this study mounted printed circuit boards from personal computers were analyzed on their content of the three elements Cd, Pb and Hg which were limited by the EU RoHS directive. Main focus of the investigations was the influence of sample pre-treatment on the precision and reproducibility of the results. The sample preparation steps used were based on the guidelines given in EN 62321. Five different types of dissolution procedures were tested on different subsequent steps of sample treatment like cutting and milling. Elemental analysis was carried out using ICP-OES, XRF and CV-AFS (Hg). The results obtained showed that for decision-making with respect to RoHS compliance a size reduction of the material to be analyzed to particles ?1.5 mm can already be sufficient. However, to ensure analytical results with relative standard deviations of less than 20%, as recommended by the EN 62321, a much larger effort for sample processing towards smaller particle sizes might be required which strongly depends on the mass fraction of the element under investigation.     

The Chattanooga School Children Study: Effects of Community Exposure to Nitrogen Dioxide

Elementary schools in four areas of Greater Chattanooga were selected for a study of the effects of community exposure to nitrogen dioxide. One area, in close proximity to a large TNT plant, had high NO₂ exposure, another had relatively high suspended particulate exposure, and two areas served as “clean” controls. The similarity of the economic levels of the High-NO₂ and Control areas and the moderately lower economic level of the High-Particulate area were documented. Pollutant concentrations for NO₂ gas, suspended nitrates and sulfates, total suspended particulates, and soiling index were measured at stations located within the study areas. Ventilatory performance of second-grade school children in the High-NO₂ exposure area was significantly lower than the performance of children in the Control areas. The data suggested that ventilatory performance was adversely affected only when an NO₂ threshold was exceeded but that above this threshold no further impairment of performance could be detected.     

Land Sharing vs Land Sparing to Conserve Biodiversity: How Agricultural Markets Make the Difference

In this paper, we model the supply and demand for agricultural goods and assess and compare how welfare, land use, and biodiversity are affected under intensive and extensive farming systems at market equilibrium instead of at exogenous production levels. As long as demand is responsive to price, and intensive farming has lower production costs, there exists a rebound effect (larger market size) of intensive farming. Intensive farming is then less beneficial to biodiversity than extensive farming is, except when there is a high degree of convexity between biodiversity and yield. On the other hand, extensive farming leads to higher prices and smaller quantities for consumers. Depending on parameter values, it may increase or decrease agricultural producer profits. Implementing “active” land sparing by zoning some land for agriculture and other land for conservation could overcome the rebound effect of intensive farming, but we show that farmers have then incentives to encroach on land zoned for conservation, with higher incentives under intensive farming. We also show that the primary effect of the higher prices associated with extensive farming is a reduction of animal feed production, which has a higher price elasticity of demand, whereas less of an effect is observed on plant-based food production and almost no effect is observed on biofuel production if there are mandatory blending policies.     

Nest separation and the dynamics of the Gestalt odor in the polydomous ant Cataglyphis iberica (Hymenoptera, Formicidae)

In the polydomous ant species Cataglyphis iberica, nests belonging to the same colony are completely separated during hibernation. In order to examine whether this separation induces changes both in the hydrocarbon profile and in recognition ability between adult nestmates, we separated groups of workers for several months under two different conditions: at hibernation temperature and at room temperature. At room temperature, recognition remained unchanged but separation led to longer mutual antennations relative to non-separated controls. When half of a colony was placed under hibernation conditions, antennal interactions also increased in duration and a few aggressive interactions emerged between separated ants. This aggressiveness never reached the intercolonial level observed in this species. In both cases, the hydrocarbon profiles showed differences between individuals after separation while remaining homogeneous within each nest. This chemical modification may induce the longer antennations observed. After separated groups were reunited, individuals recovered their previous antennation pattern and a convergence in hydrocarbon profiles was again observed. These concurrent observations suggest that hydrocarbons are transferred between nestmates. In C. iberica, the formation of the colonial odor seems to follow the “Gestalt” model which allows all satellite nests of a colony to have a common colonial odor. In the field, temporary nest isolation during hibernation may induce divergence between satellites. The role of adult transport in connecting nests during the active season to obtain an efficient Gestalt odor is discussed. Received: 16 June 1997 / Accepted after revision: 25 October 1997     

Quantification of methane emissions from full-scale open windrow composting of biowaste using an inverse dispersion technique

An inverse dispersion technique in conjunction with Open-Path Tunable-Diode-Laser-Spectroscopy (OP-TDLS) and meteorological measurements was applied to characterise methane (CH₄) emissions from an Austrian open-windrow composting plant treating source-separated biowaste. Within the measurement campaigns from July to September 2012 different operating conditions (e.g. before, during and after turning and/or sieving events) were considered to reflect the plant-specific process efficiency. In addition, the tracer technique using acetylene (C₂H₂) was applied during the measurement campaigns as a comparison to the dispersion model. Plant-specific methane emissions varied between 1.7 and 14.3 g CH₄/m³d (1.3–10.7 kg CH₄/h) under real-life management assuming a rotting volume of 18,000 m³. In addition, emission measurements indicated that the turning frequency of the open windrows appears to be a crucial factor controlling CH₄ emissions when composting biowaste. The lowest CH₄ emission was measured at a passive state of the windrows without any turning event (“standstill” and “sieving of matured compost”). Not surprisingly, higher CH₄ emissions occurred during turning events, which can be mainly attributed to the instant release of trapped CH₄. Besides the operation mode, the meteorological conditions (e.g. wind speed, atmospheric stability) may be further factors that likely affect the release of CH₄ emissions at an open windrow system. However, the maximum daily CH₄ emissions of 1 m³ rotting material of the composting plant are only 0.7–6.5% of the potential daily methane emissions released from 1 m³ of mechanically–biologically treated (MBT) waste being landfilled according to the required limit values given in the Austrian landfill ordinance.     

Behavior of PAHs during cold storage of historically contaminated soil samples

The stability of historically polycyclic aromatic hydrocarbon (PAH)-contaminated soils during cold storage was investigated. Samples from two former manufactured gas plants exhibited quantitative recoveries of PAHs over the whole period of sample holding at 4 °C in the dark (8–10 months), whereas significant losses of PAHs were observed for soils received from a former railroad sleeper preservation plant with low molecular weight compounds being notably more affected compared to heavier PAHs. Already after 2 weeks of holding time, 3-ring PAHs in one of theses samples were down to 29–73% of the initial concentration and significant losses were observed for up to 5-ring compounds. Dissipation of PAHs was found to be predominantly due to aerobic microbial metabolism since sodium azide poisoned samples showed quantitative recoveries for all PAHs over the entire storage time of 3 months. A similar stabilizing effect was observed for freezing at −20 °C as means of preservation. Except for acenaphthene, no significant loss for any of the PAHs was observed over 6 weeks of holding time. Eventually, selected chemical, physical, and biological parameters of two soils were investigated and identified as potential indicators for the stability of PAH-contaminated soil samples.     

Triazines in the aquatic systems of the Eastern Chinese Rivers Liao-He and Yangtse

The results of a one-year monitoring program on the two Eastern Chinese River systems, i.e. the Liao-He and the Yangtse, with special emphasis on the presence of triazine herbicides are presented. Sediment, suspended solids and water samples from both rivers were analyzed. Additionally, recovery experiments on the SPE-in-field-enrichment procedure and the extraction methods were performed. The samples were measured by gas chromatography coupled with mass spectrometry, electron capture detection and a newly developed mu-plasma atomic emission detector. A typical result of a one-year monitoring was obtained in case of the Liao-He: During winter, at low water period, low triazine values were found. A similar situation was found in early spring. Highest concentrations of atrazine up to 1600 ng/l were found in late spring in the water samples. Maximum concentrations of atrazine, simazine, propazine, simetryn and prometryn were observed in this season as a result of the actual use of triazines. Finally, after the high water period in autumn the triazine concentrations decreased. Additionally, atrazine adsorbed on sediment (up to 2.8 ng/g) and suspended solids was determined (up to 8 ng/l) during late spring sampling. Therefore, the logarithm of the organic carbon based sorption coefficient of atrazine could be calculated. Low levels of atrazine were measured in the water of Yangtse (up to 18.3 ng/l). The concentrations from all sampling points and sampling stations of a particular sampling date were similar, which indicates a homogeneous distribution of this herbicide. Due to the high discharge rate of up to 79,000 m3/s in case of the Yangtse a considerable mass transport of up to 57.5 kg per day atrazine may take place, even at concentrations below the European drinking water limit of 100 ng/l.