The Control of an Invasive Bivalve, Corbicula fluminea, Using Gas Impermeable Benthic Barriers in a Large Natural Lake

Anoxia can restrict species establishment in aquatic systems and the artificial promotion of these conditions can provide an effective control strategy for invasive molluscs. Low abundances (2-20 m(-2)) of the nonnative bivalve, Asian clam (Corbicula fluminea), were first recorded in Lake Tahoe, CA-NV in 2002 and by 2010 nuisance-level population densities (>10,000 m(-2)) were observed. A non-chemical control method using gas impermeable benthic barriers to reduce dissolved oxygen (DO) concentrations available to C. fluminea was tested in this ultra-oligotrophic natural lake. In 2009, the impact of ethylene propylene diene monomer (EPDM) sheets (9 m(2), n = 6) on C. fluminea beds was tested on 1-7 day intervals over a 56 day period (August-September). At an average water temperature of 18 °C, DO concentrations under these small barriers were reduced to zero after 72 h resulting in 100 % C. fluminea mortality after 28 days. In 2010, a large EPDM barrier (1,950 m(2)) was applied to C. fluminea populations for 120 days (July-November). C. fluminea abundances were reduced over 98 % after barrier removal, and remained significantly reduced (>90 %) 1 year later. Non-target benthic macroinvertebrate abundances were also reduced, with variable taxon-specific recolonization rates. High C. fluminea abundance under anoxic conditions increased the release of ammonium and soluble reactive phosphorus from the sediment substrate; but levels of unionized ammonia were low at 0.004-0.005 mg L(-1). Prolonged exposure to anoxia using benthic barriers can provide an effective short term control strategy for C. fluminea.     

Analyzing the cost effectiveness of Santiago, Chile's policy of using urban forests to improve air quality

Santiago, Chile has the distinction of having among the worst urban air pollution problems in Latin America. As part of an atmospheric pollution reduction plan, the Santiago Regional Metropolitan government defined an environmental policy goal of using urban forests to remove particulate matter less than 10 microm (PM(10)) in the Gran Santiago area. We used cost effectiveness, or the process of establishing costs and selecting least cost alternatives for obtaining a defined policy goal of PM(10) removal, to analyze this policy goal. For this study, we quantified PM(10) removal by Santiago's urban forests based on socioeconomic strata and using field and real-time pollution and climate data via a dry deposition urban forest effects model. Municipal urban forest management costs were estimated using management cost surveys and Chilean Ministry of Planning and Cooperation documents. Results indicate that managing municipal urban forests (trees, shrubs, and grass whose management is under the jurisdiction of Santiago's 36 municipalities) to remove PM(10) was a cost-effective policy for abating PM(10) based on criteria set by the World Bank. In addition, we compared the cost effectiveness of managing municipal urban forests and street trees to other control policies (e.g. alternative fuels) to abate PM(10) in Santiago and determined that municipal urban forest management efficiency was similar to these other air quality improvement measures.     

Are EMS environmentally effective? The link between environmental management systems and environmental performance in European companies

Based on the analysis of a large dataset on the environmental performance of European companies in five industrial sectors, this paper examines the question of whether the presence of an environmental management system (EMS) has a positive impact on the eco-efficiency of companies. It begins with a review of evidence about the link between EMS and environmental performance in business organisations, finding that, despite much research, there is still little quantitative evidence. The second part of the paper uses three independent statistical methods (simple correlations, Jaggi-Freedman indices and a ‘trend differences’ approach) to assess whether companies and production sites with EMS perform better than those without and whether performance improves after an EMS has been introduced. The paper shows that there is currently no evidence that EMS have a consistent and significant positive impact on environmental performance. Policy action based on the simple assumption that companies with an EMS perform better than those without therefore seems inappropriate.     

A phenomenological approach shows a high coherence of warming patterns in dimictic aquatic systems across latitude

To predict the coherence in local responses to large-scale climatic forcing among aquatic systems, we developed a generalized approach to compare long-term data of dimictic water bodies based on phenomenologically defined hydrographic events. These climate-sensitive phases (inverse stratification, spring overturn, early thermal stratification, summer stagnation) were classified in a dual code (cold/warm) based on threshold temperatures. Accounting for a latitudinal gradient in seasonal timing of phases derived from gradients in cumulative irradiation (2.2?days per degree latitude), we found a high spatial and temporal coherence in warm–cold patterns for six lakes (84?%) and the Baltic Sea (78?%), even when using the same thresholds for all sites. Similarity to CW-codes for the North Sea still was up to 72?%. The approach allows prediction of phase-specific warming trends and resulting instantaneous or time-delayed ecological responses. Exemplarily, we show that warming during early thermal stratification controls food-web-mediated effects on key species during summer.     

Improving inverse model fitting in trees—Anisotropy,multiplicative effects,and Bayes estimation

Model fitting for individual-based effects in forests has some problems. Because samples measuring the separate influence of each individual are rarely available, the measured value in the sample represents the influence of all surrounding individual trees. Therefore, it is helpful to build inverse models that use the spatial pattern of the variable as well as that of the source trees. For example, since seed dispersal is influenced by wind effects, a model is discussed describing anisotropic effects to ensure an unbiased estimate of the total fruit number. Further, we present a model describing the absorption of radiation by trees. In this case a multiplicative combination of individual effects yields the total effect. Our approach uses logarithmic transformations of the original data to model multiplicative combinations as sum of transformed single effects. For fitting model parameters we propose an approach based on Bayesian statistics, to ensure ecologically interpretable parameters.     

Evaluation of landfill leachate treatment by advanced oxidative process by Fenton’s reagent combined with membrane separation system

A high content of refractory organic matter, ammonia and toxic compounds is characteristic of landfill leachate. Advanced oxidative processes (AOPs) are an attractive alternative for landfill leachate treatment. However, when applied as a unique process treatment, they do not provide a complete solution for the effluent treatment. Combining AOP with a membrane separation process (MSP) presents a number of benefits and provides an adequate solution for this problem. With this in mind, the present work aims to evaluate, using a bench scale, leachate treatability through AOP by Fenton’s reagent (AOP/Fenton) combined with microfiltration (MF) and nanofiltration (NF). A high efficient removal of COD (63%), true color (76%) and humic substances (50%) was observed during AOP/Fenton under optimized conditions (1.7 g H₂O₂/g COD_{raw leachate}; FeSO₄·7H₂O:H₂O₂ = 1:5.3; pH = 3.8; reaction conditions = 115 rpm/28 min). According to the evaluated parameters, MSP presented an efficient complementary treatment, in which the integrity of the stages was sufficient for reaching regulatory levels in the effluent (Deliberação Normativa Conjunta COPAM/CERH-MG N^o. 1, May 5, 2008).     

Stable isotope signatures for characterising the biological stability of landfilled municipal solid waste

Stable isotopic signatures of landfill leachates are influenced by processes within municipal solid waste (MSW) landfills mainly depending on the aerobic/anaerobic phase of the landfill. We investigated the isotopic signatures of δ¹³C, δ²H and δ¹⁸O of different leachates from lab-scale experiments, lysimeter experiments and a landfill under in situ aeration. In the laboratory, columns filled with MSW of different age and reactivity were percolated under aerobic and anaerobic conditions. In landfill simulation reactors, waste of a 25 year old landfill was kept under aerobic and anaerobic conditions. The lysimeter facility was filled with mechanically shredded fresh waste. After starting of the methane production the waste in the lysimeter containments was aerated in situ. Leachate and gas composition were monitored continuously. In addition the seepage water of an old landfill was collected and analysed periodically before and during an in situ aeration.We found significant differences in the δ¹³C-value of the dissolved inorganic carbon (δ¹³C-DIC) of the leachate between aerobic and anaerobic waste material. During aerobic degradation, the signature of δ¹³C-DIC was mainly dependent on the isotopic composition of the organic matter in the waste, resulting in a δ¹³C-DIC of ?20‰ to ?25‰. The production of methane under anaerobic conditions caused an increase in δ¹³C-DIC up to values of +10‰ and higher depending on the actual reactivity of the MSW. During aeration of a landfill the aerobic degradation of the remaining organic matter caused a decrease to a δ¹³C-DIC of about ?20‰. Therefore carbon isotope analysis in leachates and groundwater can be used for tracing the oxidation–reduction status of MSW landfills.Our results indicate that monitoring of stable isotopic signatures of landfill leachates over a longer time period (e.g. during in situ aeration) is a powerful and cost-effective tool for characterising the biodegradability and stability of the organic matter in landfilled municipal solid waste and can be used for monitoring the progress of in situ aeration.     

Management practices that concentrate visitor activities: camping impact management at Isle Royale National Park,USA

This study assessed campsite conditions and the effectiveness of campsite impact management strategies at Isle Royale National Park, USA. Protocols for assessing indicators of vegetation and soil conditions were developed and applied to 156 campsites and 88 shelters within 36 backcountry campgrounds. The average site was 68 m2 and 83% of sites lost vegetation over areas less than 47 m2. We believe that management actions implemented to spatially concentrate camping activities and reduce camping disturbance have been highly successful. Comparisons of disturbed area/overnight stay among other protected areas reinforces this assertion. These reductions in area of camping disturbance are attributed to a designated site camping policy, limitation on site numbers, construction of sites in sloping terrain, use of facilities, and an ongoing program of campsite maintenance. Such actions are most appropriate in higher use backcountry and wilderness settings.     

Effects of smelter sulfur dioxide emissions: a spatiotemporal perspective using carbon isotopes in tree rings

We wanted to test the hypothesis that forest exposure to phytotoxic gases indirectly affects their carbon uptake. We estimated that the reduction of photosynthesis may have reached 20 to 30% at a site located 9 km (test site) from the Horne copper smelter in Rouyn-Noranda, which is a point source of SO2. Twenty-one spruce trees older than 100 yr were selected from seven sites at various distances from the smelter to evaluate conditions prior to and during the periods of smelter operation. The carbon isotope results obtained from spruce tree rings at our test site reveal an unprecedented and abrupt shift of +4/1000 after the onset of smelter operations. This large and permanent shift exceeds natural variations in regional pre-smelter series or in the series at a remote control site. All trees up to 116 km downwind from the smelter show delta13C positive shifts following the onset of operations. There is also a clear inverse relationship between the amplitude of the first-order trends and distance from the smelter. Those delta13C trends indicate that trees exposed to high levels of SO2 decrease their level of CO2 uptake through activation of stomatal closure. This is strongly supported by the significant departure of the Rouyn-Noranda trends from those measured for trees from non-industrialized areas of the Northern Hemisphere, or calculated using global atmospheric conditions. Considering the large number of SO2 point sources in North America, our results imply that CO2 uptake by the boreal forest in the vicinity of these sources may be lower than previously thought.     

Evaluation of catalyzed and electrically heated filters for removal of particulate emissions from diesel-A- and JP-8-fueled engines

In-service diesel engines are a significant source of particulate matter (PM) emissions, and they have been subjected to increasingly strict emissions standards. Consequently, the wide-scale use of some type of particulate filter is expected. This study evaluated the effect of an Engelhard catalyzed soot filter (CSF) and a Rypos electrically heated soot filter on the emissions from in-service diesel engines in terms of PM mass, black carbon concentration, particle-bound polycyclic aromatic hydrocarbon concentration, and size distribution. Both filters capture PM. The CSF relies on the engine's exhaust to reach the catalyst regeneration temperature and oxidize soot, whereas the electrically heated filter contains a heating element to oxidize soot. The filters were installed on several military diesel engines. Particle concentrations and compositions were measured before and after installation of the filter and again after several months of operation. Generally, the CSF removed at least 90% of total PM, and the removal efficiency improved or remained constant after several months of operation. In contrast, the electrical filters removed 44-69% of PM mass. In addition to evaluating the soot filters, the sampling team also compared the results of several real-time particle measurement instruments to traditional filter measurements of total mass.