Benefits of extra-pair mating may depend on environmental conditions—an experimental study in the blue tit (Cyanistes caeruleus)

Extra-pair mating constitutes a relatively common reproductive strategy in many socially monogamous bird species. This strategy may considerably improve reproductive success of males, but female benefits from extra-pair matings still remain unclear and empirical evidence is scarce. This may be because genetic benefits of extra-pair mating are not always revealed. It is possible that they are shown only in unfavourable environmental conditions and hence problems arise with detecting differences between within- and extra-pair offspring whose performance is measured under favourable conditions. In order to test this prediction, we manipulated environmental conditions by altering brood sizes of blue tits and compared phenotypic characteristics of within- and extra-pair offspring in mixed-paternity broods. We found that extra-pair young exhibited a higher response to phytohemagglutinin in comparison to within-pair young, but this was only observed among nestlings from experimentally enlarged broods. These results indicate that genetic benefits may interact with the environment, and thus benefits of extra-pair mating are likely to become visible only when conditions are relatively unfavourable.     

Influence of the milling tool setup on occupational safety in furniture making

One of the most serious causes of accidents in furniture making is kickback of machined material. The aim of this study was to determine the influence of the milling tool setup on hazards associated with kickback in furniture making. The speed of kickback was accepted as the measure of these hazards. The experiment involved controlled changes in milling tool setup, projection of cutting knives over the body of the milling tool, number of cutting knives and clearance angle. Multifactor analysis of variance was applied to the results of individual experiments, showing statistically significant factors and their interactions. Inspection and analysis of traces left by the cutting knives of the tools on the test pieces made of wood materials supported inferential statistics. The obtained results verified some common opinions and ideas on the impact of the milling tool setup on the hazards resulting from kickback in furniture making.     

Tannic acid and saponin for removing arsenic from brownfield soils：Mobilization, distribution and speciation

Plant biosurfactants were used for the first time to remove As and co-existing metals from brownfield soils. Tannic acid （TA）, a polyphenol, and saponin （SAP）, a glycoside were tested. The soil washing experiments were performed in batch conditions at constant biosurfactant concentration （3%）. Both biosurfactants differed in natural pH, surface tension, critical micelle concentration and content of functional groups. After a single washing, TA （pH 3.44） more efficiently mobilized As than SAP （pH 5.44）. When both biosurfactants were used at the same pH （SAP adjusted to 3.44）, arsenic mobilization was improved by triple washing. The process efficiency for TA and SAP was similar, and depending on the soil sample, ranged between 50%-64%. Arsenic mobilization by TA and SAP resulted mainly from decomposition of Fe arsenates, followed by Fe3＋ complexation with biosurfactants. Arsenic was efficiently released from reducible and partially from residual fractions. In all soils, As（V） was almost completely removed, whereas content of As（III） was decreased by 37%-73%. SAP and TA might be used potentially to remove As from contaminated soils.     

Distribution of inorganic bromine and metals during co-combustion of polycarbonate (BrPC) and high-impact polystyrene (BrHIPS) wastes containing brominated flame retardants (BFRs) with metallurgical dust

This study focused on the thermal degradation of polycarbonate (BrPC) and high-impact polystyrene (BrHIPS), containing different brominated flame retardants. The evolved inorganic bromine was utilized for the separation of metals present in electric arc furnace dust (EAFD). The thermal degradation of BrPC generated inorganic gaseous HBr (69%) and condensable Br₂ (31%). The bromine evolved from BrHIPS was detected almost entirely in a condensed phase as SbBr₃. When mixed with EAFD, the evolved inorganic bromine reacted immediately with the metallic components of zinc and lead, but not with iron. The best bromination efficiencies were obtained during the isothermal heating (80 min at 550 °C) of the mixtures at mass ratios of 6:1 and 9:1 w/w under oxidizing conditions. The achieved brominating rates reached 78 and 81% for zinc and 90 and 94% for lead in 6:1 and 9:1 BrPC:EAFD, respectively, and 47 and 65% for zinc and 67 and 63% for lead in 6:1 and 9:1 BrHIPS:EAFD, respectively. The oxidizing condition favored complete vaporization of the formed bromides.     

Is body size of the water frog Rana esculenta complex responding to climate change?

Recent studies on climate responses in ectothermic (cold-blooded) vertebrates have been few in number and focussed on phenology rather than morphology. According to Bergmann’s rule, endothermic (warm-blooded) vertebrates from cooler climates tend to be larger than congeners from warmer regions. Although amphibians are ectothermic vertebrates, weather and climatic conditions may also impact on their morphology, and thereby affect their survival rates and population dynamics. In this paper, we show, in a unique long-term study during the period 1963–2003 in an agricultural landscape in western Poland, that the body length of two water frog parental species (males of both Rana ridibunda and R. lessonae) increased significantly. However, their hybridogenetic hybrid R. esculenta did not show similar changes. A significant relationship with a large-scale climatic factor, the winter North Atlantic Oscillation index, was found positive for R. ridibunda males and R. lessonae females, and negative for R. esculenta females. Our findings, the first for amphibians, are consistent with other studies reporting that recent climate change has affected the morphology of animals. However, we also show that changes in amphibian phenotype linked to climate may vary independently between (even very similar) species.     

Carbon isotope effects during precipitation of barium carbonate: implications for environmental studies

Here we demonstrate that precipitation of dissolved inorganic carbon (DIC) to at pH 10.26, 11.38 and 12.11 does not cause measurable carbon isotope fractionation. However, NaOH solution prepared under standard laboratory procedure and used to increase pH value for precipitation of BaCO₃ can be contaminated by atmospheric CO₂. In our experiment, δ¹³C value in the contaminant DIC was −24.30‰, which resulted in decrease in the δ¹³C(DIC) value by 0.03, 0.07 and 0.22 at pH 10.26, 11.38 and 12.11, respectively.     

Metal (Cu, Cd and Zn) removal and stabilization during multiple soil washing by saponin

The influence of multiple saponin washing on copper, cadmium and zinc removal and stability in three types of soils (loamy sand, loam, silty clay) was investigated. Distribution of metals and their mobility measured as the ratio of exchangeable form to the sum of all fractions in soils was differential. After single washing the highest efficiency of metal removal was obtained in loamy sand (82-90%) and loam (67-88%), whereas the lowest in silty clay (39-62%). In loamy sand and loam metals had higher mobility factors (44-61% Cu, 60-76% Cd, and 68-84% Zn) compared to silty clay (9% Cu, 28% Cd and 36% Zn). Triplicate washing led to increase both efficiency of metal removal and percentage content of their stable forms.In consequence, fractional patterns for metals before and after treatment changed visibly as a result of their redistribution. Based on the redistribution index, the most stable metal (mainly in residual and organic fractions) after triplicate washing was Cu in loamy sand and loam. For silty clay contaminated with Cd, effective metal removal and its stabilization required a higher number of washings.     

Estimation of energy demand of fermentation-based hydrogen production

The paper is concerned with estimation of heat and power consumption in a conceptual plant to produce hydrogen from sucrose-containing or starchy biomass by fermentation. A hydrogen plant connected with a sugar factory is regarded as the basic option; the sugar factory serves as a source of sucrose-containing thick juice for the hydrogen plant, where this feedstock is processed to hydrogen. As another option, a stand-alone hydrogen plant in which starch must initially be converted to fermentable glucose solution is considered. The values of key process parameters are assumed on the basis of preliminary experimental data. For both options of the hydrogen plant, heat consumption is estimated taking heat recovery in a heat exchanger network into account. Power consumption is estimated by calculating power needed for pumping of liquid and gaseous process media.