Determination of PCDDs,PCDFs, PCBs and HCB emissions from the metallurgical sector in Poland

Background The aim of the project was to measure the actual emissions of PCDD/F, PCBs and HCB from 20 selected metallurgical installations in Poland, in order to update the national inventory of dioxin emission from metallurgical industry for developing a strategy for dioxins and furans emission abatement from the subject facilities (UNEP 2005). Methods Sampling methodology used in this work was developed at the Cracow University of Technology because of the complexity of simultaneous sampling and determining PCDFs, PCDDs, PCB and HCB. For the determination a GC-MS/MS system was used. Results and Discussion Results from the work indicate that the highest dioxins and PCB concentrations were recorded for iron ore sintering plants at 1.10–1.32 ng total¹ TEQ/Nm³ followed by aluminium scrap melting at 0.03–0.66 ng total TEQ/Nm³. The highest HCB concentrations at 613–1491 ng/Nm³ were also recorded for iron ore sintering plants, whereas at aluminium plants the HCB concentrations were in the range of only 10.1–22.7 ng/Nm³. Conclusions The above investigations indicate that secondary aluminium production is the most significant dioxins source, if calculated as emission factor values. However, iron ore sintering plants are operating at much higher production capacity, causing this process to become the major source of dioxins, PCB and HCB pollution to the atmosphere in Poland. Recommendations and Perspectives Based on the performed tests and the environmental reviews of selected plants several recommendations were formulated for the reduction of generation or of emission of these pollutants from iron ore sintering plants, electric arc furnace steel production processes, hot-blast furnace operations, secondary aluminium smelting and primary zinc production from zinc cathodes.     

Integration studies on a two-stage fermentation process for the production of biohydrogen

Fermentation of biomass residues and second generation biomasses is potentially a way to enable a sustainable production of hydrogen. Simulation models which calculate mass and energy balances, developed with Aspen Plus^®, are used to integrate the process steps necessary to produce pure hydrogen from biomass in a 2-stage fermentation process. Process and heat integration are introduced to reduce the high water and heat demand of the process, connected to the low substrate concentrations in the involved process streams. The results show that the recirculation of process effluents, together with the use of properly designed heat exchangers, can reduce the water and heat demand up to 90% from a non-integrated process, but is also subject to restrictions due to an increase in osmolality in the system.     

Survey of dioxin sources in the Baltic Region (extended summary)

The present paper summarises the results of the project: 'Survey of Anthropogenic Sources of Dioxins and Furans in the Baltic Region'. As a part of the project, inventories have been carried out in Estonia, Latvia, Lithuania and Poland by applying the toolkit for quantification of dioxin and furan releases developed by UNEP Chemicals. The main route of direct releases to the environment is emission to air. Total emission to air from Poland was estimated at 490 (88-1,300) g I-TEQ/year, whereas the emissions from Estonia, Latvia and Lithuania were estimated as being 14 (2.4-54), 23 (2.6-63) and 17 (2.6-38) g I-TEQ, respectively. In general, the uncertainty on the estimates is very high, and recommendations regarding further development of the inventories have been made, and measures for reducing the releases have been provided.     

Androgen-dependent maternal effects on offspring fitness in zebra finches

There is accumulating evidence that maternal hormones may play a role in offspring sex adjustment, but little is known about the costs of such hormone-mediated mechanisms. Recent studies have reported sex-specific effects of hormones on offspring viability. Specifically, we previously found that elevating the plasma androgen level in mothers results in a male-biased offspring primary sex ratio, but it affects the viability of sons negatively and daughters positively in zebra finches (Taeniopygia guttata; Rutkowska and Cichoń, Anim Behav, 71:1283–1288, 2006). In this study, we studied further fitness consequences of exposure to elevated yolk androgen levels in zebra finches. We measured growth rate and cellular immune response of nestlings that hatched from eggs laid by females injected with testosterone during egg laying and nestlings of unaffected control females. We found that sons of testosterone-treated females grew slower in comparison to sons of control females. The significant interaction between experimental group and offspring sex indicates that sons of testosterone-treated mothers suffered impaired immune responsiveness while daughters seemed to benefit from elevated androgen level in terms of enhanced immune responsiveness. We found no effects of androgens on offspring performance at adulthood—neither fecundity of females nor attractiveness of males was affected. We conclude that the benefits of biasing sex ratio towards males by increasing androgen level in the yolk may be limited due to negative effects on male offspring performance early in life.     

Gloves against mineral oils and mechanical hazards: composites of carboxylated acrylonitrile–butadiene rubber latex

Resistance to permeation of noxious chemical substances should be accompanied by resistance to mechanical factors because the glove material may be torn, cut or punctured in the workplace. This study reports on glove materials, protecting against mineral oils and mechanical hazards, made of carboxylated acrylonitrile–butadiene rubber (XNBR) latex. The obtained materials were characterized by a very high resistance of the produced materials to oil permeation (breakthrough time?>?480?min). The mechanical properties, and especially tear resistance, of the studied materials were improved after the addition of modified bentonite (nanofiller) to the XNBR latex mixture. The nanocomposite meets the requirements in terms of parameters characterizing tear, abrasion, cut and puncture resistance. Therefore, the developed material may be used for the production of multifunctional protective gloves.     

The usability of the IR,RAC and MRI indices of heavy metal distribution to assess the environmental quality of sewage sludge composts

To assess the environmental quality of compost, it is insufficient to use only total metal concentration. Therefore in this study, the stability of metals in compost and the environmental risk they pose were assessed by three indices that have been proposed for soils or sediments: the I_R, the RAC and the MRI. In mature composts, the highest bonding intensity was for Ni (0.79 < I_R < 0.93), then for Cu (0.56 < I_R < 0.65) and Pb (0.55 < I_R < 0.73), and the lowest for Zn (0.19 < I_R < 0.25). Although, both the I_R and the RAC are useful indices for evaluating the mobility of metals, they do not take into account their toxicity. Therefore, the overall classification of compost should also include the MRI, at which metal toxicity from the most available fractions is considered. Based on the MRI ranged between 10.0 and 11.6, all composts evaluated posed a low risk.     

Distribution of copper,silver and gold during thermal treatment with brominated flame retardants

The growing consumption of electric and electronic equipment results in creating an increasing amount of electronic waste. The most economically and environmentally advantageous methods for the treatment and recycling of waste electric and electronic equipment (WEEE) are the thermal techniques such as direct combustion, co-combustion with plastic wastes, pyrolysis and gasification. Nowadays, this kind of waste is mainly thermally treated in incinerators (e.g. rotary kilns) to decompose the plastics present, and to concentrate metals in bottom ash. The concentrated metals (e.g. copper, precious metals) can be supplied as a secondary raw material to metal smelters, while the pyrolysis of plastics allows the recovery of fuel gases, volatilising agents and, eventually, energy. Indeed, WEEE, such as a printed circuit boards (PCBs) usually contains brominated flame retardants (BFRs). From these materials, hydrobromic acid (HBr) is formed as a product of their thermal decomposition.In the present work, the bromination was studied of copper, silver and gold by HBr, originating from BFRs, such as Tetrabromobisphenol A (TBBPA) and Tetrabromobisphenol A-Tetrabromobisophenol A diglycidyl ether (TTDE) polymer; possible volatilization of the bromides formed was monitored using a thermo-gravimetric analyzer (TGA) and a laboratory-scale furnace for treating samples of metals and BFRs under an inert atmosphere and at a wide range of temperatures. The results obtained indicate that up to about 50% of copper and silver can evolve from sample residues in the form of volatile CuBr and AgBr above 600 and 1000 °C, respectively. The reactions occur in the molten resin phase simultaneously with the decomposition of the brominated resin. Gold is resistant to HBr and remains unchanged in the residue.     

Do the pollution related to high-traffic roads in urbanised areas pose a significant threat to the local population?

Many large neighbourhoods are located near heavy-traffic roads; therefore, it is necessary to control the levels of air pollution near road exposure. The primary air pollutants emitted by motor vehicles are CO, NO₂ and PM. Various investigations identify key health outcomes to be consistently associated with NO₂ and CO. The objective of this study was the measurement-based assessment for determining whether by high-traffic roads, such as motorways and express ways, and the concentrations of CO and NO₂ are within normal limits and do not pose threat to the local population. Average daily values (arithmetic values calculated for 1-h values within 24 h or less, depending on result availability) were measured for concentrations of NO₂ and CO by automatic stations belonging to the Voivodship Environmental Protection Inspectorate in Katowice, in areas with similar dominant source of pollutant emission. The measurements were made in three sites: near the motorway and expressway, where the average daily traffic intensity is 100983 and 35414 of vehicles relatively. No evidence was found of exceeding average daily values equal to the maximum allowable NO₂ concentration due to the protection of human health in the measurement area of the stations. No daily average values exceeding the admissible CO concentration (8-h moving average) were noted in the examined period. The results clearly show lack of hazards for general population health in terms of increased concentrations of CO and NO₂ compounds that are closely related to high intensity car traffic found on selected motorways and speedways located near the city centres.