ExSys-LOPA for the chemical process industry

The chemical process industries are characterized by the use, processing, and storage of large amounts of dangerous chemical substances and/or energy. Among different missions of chemical plants there are two very important ones, which: 1. provide a safe work environment, 2. fully protect the environment. These important missions can be achieved only by design of adequate safeguards for identified process hazards. Layer of Protection Analysis (LOPA) can successfully answer this question. This technique is a simplified process of quantitative risk assessment, using the order of magnitude categories for initiating cause frequency, consequence severity, and the likelihood of failure of independent protection layers to analyze and assess the risk of particular accident scenarios. LOPA requires application of qualitative hazard evaluation methods to identify accident scenarios, including initiating causes and appropriate safeguards. This can be well fulfilled, e.g., by HAZOP Studies or What-If Analysis. However, those techniques require extensive experience, efforts by teams of experts as well as significant time commitments, especially for complex chemical process units. In order to simplify that process, this paper presents another strategy that is a combination of an expert system for accident scenario identification with subsequent application of LOPA. The concept is called ExSys-LOPA, which employs, prepared in advance, values from engineering databases for identification of loss events specific to the selected target process and subsequently a accident scenario barrier model developed as an input for LOPA. Such consistent rules for the identification of accident scenarios to be analyzed can facilitate and expedite the analysis and thereby incorporate many more scenarios and analyze those for adequacy of the safeguards. An associated computer program is under development. The proposed technique supports and extends the Layer of Protection Analysis application, especially for safety assurance assessment of risk-based determination for the process industries. A case study concerning HF alkylation plant illustrates the proposed method.     

Properties of biochars from conventional and alternative feedstocks and their suitability for metal immobilization in industrial soil

In contaminated soils, excessive concentrations of metals and their high mobility pose a serious environmental risk. A suitable soil amendment can minimize the negative effect of metals in soil. This study investigated the effect of different biochars on metal (Cu, Pb, Zn) immobilization in industrial soil. Biochars produced at 300 and 600 °C from conventional (MS, maize silage; WP, wooden pellets) and alternative (SC, sewage sludge compost; DR, digestate residue) feedstocks were used as soil amendments at a dosage of 10 % (w/w). The type of feedstock and pyrolysis temperature affected the properties of the biochars and their ability to immobilize metal in soil. Compared to production at 300 °C, all biochars produced at 600 °C had higher pH (6.2–10.7), content of ash (7.2–69.0 %) and fixed carbon (21.1–56.7 %), but lower content of volatile matter (9.7–37.2 %). All biochars except DR biochar had lower dissolved organic carbon (DOC) content (1.4–2.3 g C/L) when made at 600 °C. Only MS and SC biochars had higher cation exchange capacity (25.2 and 44.7 cmol/kg, respectively) after charring at 600 °C. All biochars contained low concentrations of Cd, Cu, Ni, Pb and Zn; Cd was volatilized to the greatest extent during pyrolysis. Based on FTIR analysis and molar ratios of H/C and O/C, biochars had a greater degree of carbonization and aromaticity after charring at 600 °C. The efficiency of the biochars in metal immobilization depended mainly on their pH, ash content, and concentration of DOC. SC and DR biochars were more effective for Cu and Zn immobilization than MS and WP biochars, which makes them attractive options for large-scale soil amendment.     

Biochemical and microbial soil functioning after application of the insecticide imidacloprid

Imidacloprid is one of the most commonly used insecticides in agricultural practice, and its application poses a potential risk for soil microorganisms. The objective of this study was to assess whether changes in the structure of the soil microbial community after imidacloprid application at the field rate (FR, 1 mg/kg soil) and 10 times the FR (10× FR, 10 mg/kg soil) may also have an impact on biochemical and microbial soil functioning. The obtained data showed a negative effect by imidacloprid applied at the FR dosage for substrate-induced respiration (SIR), the number of total bacteria, dehydrogenase (DHA), both phosphatases (PHOS-H and PHOS-OH), and urease (URE) at the beginning of the experiment. In 10× FR treated soil, decreased activity of SIR, DHA, PHOS-OH and PHOS-H was observed over the experimental period. Nitrifying and N₂-fixing bacteria were the most sensitive to imidacloprid. The concentration of NO₃^- decreased in both imidacloprid-treated soils, whereas the concentration of NH₄⁺ in soil with 10× FR was higher than in the control. Analysis of the bacterial growth strategy revealed that imidacloprid affected the r- or K-type bacterial classes as indicated also by the decreased eco-physiological (EP) index. Imidacloprid affected the physiological state of culturable bacteria and caused a reduction in the rate of colony formation as well as a prolonged time for growth. Principal component analysis showed that imidacloprid application significantly shifted the measured parameters, and the application of imidacloprid may pose a potential risk to the biochemical and microbial activity of soils.     

Pelagic crinoids (Roveacrinida, Crinoidea) discovered in the Neogene of Poland

Until recently, it has been assumed that pelagic crinoids, the roveacrinids (Roveacrinida, Crinoidea), became extinct during the Cretaceous-Paleogene boundary event. Recent finds of well-preserved roveacrinidal remains (brachials and radials) in the Danian (Early Paleogene) of Poland showed that they survived into the earliest Cenozoic. This group was thus characterized as a "dead clade walking". Here, we present fossil evidence that these pelagic crinoids survived in Poland until at least the Middle Miocene (Badenian, ca. 14?Myr ago)-more than 50?Myr after their supposed extinction. These Miocene roveacrinids constitute the first documented evidence of Roveacrinida in strata of Neogene age, thus prolonging the stratigraphic range of pelagic crinoids. This find characterizes the order as a "Lazarus taxon" rather than a "dead clade walking" group.     

Dehydrogenase activity as an indicator of different microbial responses to pesticide-treated soils

A laboratory study was conducted to assess the impacts of diazinon, linuron or a fungicidal preparation of mancozeb supplemented with dimethomorph on dehydrogenase activity (DHA) in loamy sand (LS) and sandy loam (SL) soils with different features. The pesticides were applied at the maximum predicted environmental concentrations (PEC) under field conditions and at 5 or 100 times the PEC. More distinct effects were observed in LS than SL soils at all sampling times. For PEC, a significant decrease in DHA was found in LS soil treated with diazinon or the fungicidal preparation on day 1 and during the incubation period, respectively. However, DHA did not decrease in SL soil treated with the pesticides at this dosage. For the higher concentrations, decreased DHA was ascertained in LS soil treated with diazinon and the fungicidal preparation at all sampling times, whereas for linuron this effect was evident on days 14 and 28. By contrast, only 100-fold PEC significantly decreased DHA in SL soil amended with diazinon or linuron, compared with the fungicidal preparation that decreased DHA at five-fold PEC. Our results indicate that DHA was particularly sensitive to the fungicidal preparation in both soils, whereas linuron was less harmful than diazinon.     

Benefits of extra-pair mating may depend on environmental conditions—an experimental study in the blue tit (Cyanistes caeruleus)

Extra-pair mating constitutes a relatively common reproductive strategy in many socially monogamous bird species. This strategy may considerably improve reproductive success of males, but female benefits from extra-pair matings still remain unclear and empirical evidence is scarce. This may be because genetic benefits of extra-pair mating are not always revealed. It is possible that they are shown only in unfavourable environmental conditions and hence problems arise with detecting differences between within- and extra-pair offspring whose performance is measured under favourable conditions. In order to test this prediction, we manipulated environmental conditions by altering brood sizes of blue tits and compared phenotypic characteristics of within- and extra-pair offspring in mixed-paternity broods. We found that extra-pair young exhibited a higher response to phytohemagglutinin in comparison to within-pair young, but this was only observed among nestlings from experimentally enlarged broods. These results indicate that genetic benefits may interact with the environment, and thus benefits of extra-pair mating are likely to become visible only when conditions are relatively unfavourable.     

Fuzzy logic for piping risk assessment (pfLOPA)

This paper explores the application of the fuzzy logic for risk assessment of major hazards connected with transportation of flammable substances in long pipelines. As a basis for risk assessment, the framework of the fuzzy Layer of Protection Analysis (fLOPA) was used. fLOPA presents a new approach to risk assessment based on two assumptions: 1. different effects of the layer of protection functions on particular elements of the risks (frequency and severity of consequence), and 2. the application of fuzzy logic system (FLS) composed of three elements: fuzzification, inference process and defuzzification. A further calculation follows LOPA methodology with the use of fuzzy logic system where fuzzy risk matrix is used for risk assessment. A typical case study comprising section of a long pipeline failure is performed and a comparison between the classical LOPA approach and fuzzy approach is made.     

Influence of the milling tool setup on occupational safety in furniture making

One of the most serious causes of accidents in furniture making is kickback of machined material. The aim of this study was to determine the influence of the milling tool setup on hazards associated with kickback in furniture making. The speed of kickback was accepted as the measure of these hazards. The experiment involved controlled changes in milling tool setup, projection of cutting knives over the body of the milling tool, number of cutting knives and clearance angle. Multifactor analysis of variance was applied to the results of individual experiments, showing statistically significant factors and their interactions. Inspection and analysis of traces left by the cutting knives of the tools on the test pieces made of wood materials supported inferential statistics. The obtained results verified some common opinions and ideas on the impact of the milling tool setup on the hazards resulting from kickback in furniture making.     

Tannic acid and saponin for removing arsenic from brownfield soils：Mobilization, distribution and speciation

Plant biosurfactants were used for the first time to remove As and co-existing metals from brownfield soils. Tannic acid （TA）, a polyphenol, and saponin （SAP）, a glycoside were tested. The soil washing experiments were performed in batch conditions at constant biosurfactant concentration （3%）. Both biosurfactants differed in natural pH, surface tension, critical micelle concentration and content of functional groups. After a single washing, TA （pH 3.44） more efficiently mobilized As than SAP （pH 5.44）. When both biosurfactants were used at the same pH （SAP adjusted to 3.44）, arsenic mobilization was improved by triple washing. The process efficiency for TA and SAP was similar, and depending on the soil sample, ranged between 50%-64%. Arsenic mobilization by TA and SAP resulted mainly from decomposition of Fe arsenates, followed by Fe3＋ complexation with biosurfactants. Arsenic was efficiently released from reducible and partially from residual fractions. In all soils, As（V） was almost completely removed, whereas content of As（III） was decreased by 37%-73%. SAP and TA might be used potentially to remove As from contaminated soils.