Radon concentration in soil gas around local disjunctive tectonic zones in the Krakow area

The purpose of this study was to investigate radon in the vicinity of geologic fault zones within the Krakow region of Poland, and to determine the influence of such formations on enhanced radon concentrations in soil. Radon ((222)Rn and (220)Rn) concentration measurements in soil gas (using ionization chamber AlphaGUARD PQ2000 PRO and diffusion chambers with CR-39 detectors), as well as radioactive natural isotopes of radium, thorium and potassium in soil samples (using gamma ray spectrometry with NaI(Tl) and HPGe detectors), were performed. Site selection was based on a geological map of Krakow. Geophysical methods (ground penetrating radar and shallow acoustic seismic) were applied to recognize the geological structure of the area and to locate the predicted courses of faults. Elevated levels of radon and thoron in soil gas were found in the study area when compared with those observed in an earlier survey covering Krakow agglomeration. For (222)Rn, the arithmetic mean of registered concentration values was 39 kBq/m(3) (median: 35.5 kBq/m(3)). For (220)Rn, the arithmetic mean was 10.8 kBq/m(3) and median 11.8 kBq/m(3).     

Estimates of (239+240)Pu inventories in Gdańsk Bay and Gdańsk basin

This paper presents and discusses the results of (239+240)Pu determinations in different components of Gdańsk bay and Gdańsk basin ecosystem, as well as estimated sources and inventories of plutonium in these basins. The total plutonium (239+240)Pu activities deposited in Gdańsk bay and Gdańsk basin sediments are 1.18 TBq and 3.77 TBq, respectively. Two rivers, the Vistula and Neman rivers, and atmospheric fallout were distinguished as the main sources of plutonium in these basins. In seawater (with suspended matter included) there is about 2.33 GBq (239+240)Pu (0.2% of total activity) in Gdańsk bay and 9.92 GBq (239+240)Pu (0.3% of total activity) in Gdańsk basin. In both cases, 56% of (239+240)Pu is associated with suspended matter. Organisms contain 3.81 MBq in Gdańsk bay and 7.45 MBq (239+240)Pu in Gdańsk basin. From this value in Gdańsk bay 82.1% of plutonium is associated with zoobenthos, 13.6% with phytobenthos, 1.6% with phytoplankton, 1.5% with zooplankton and 1.2% with fish. In Gdańsk basin, 83.2% is associated with zoobenthos, 7.5% with phytobenthos, 3.6% with phytoplankton, 3.2% with zooplankton and 2.5% with fish.     

Environmental evaluation of different variants of the chromium compound production model using chromic waste

This work presents research results on the evaluation of environmental effects of utilizing chromic waste in chromium compound production processes. The comprehensive evaluation of three chromium compound production models takes into consideration the total cumulated hazard coefficients. The implementation of the new chromium compound production model into industrial practice in 1999 allows the hazard to the natural environment to decrease by 75% in relation to the hazard caused by the old production model used until 1995. The coefficient of the target chromium compound production model was 199%, much higher than 100%. This results from the negative values of the total cumulated hazard coefficients for those cases where the sodium chromate production unit could be a big "consumer" of chromic waste.     

Incineration treatment of arsenic-contaminated soil

An incineration test program was conducted at the U.S. Environmental Protection Agency's Incineration Research Facility to evaluate the potential of incineration as a treatment option for contaminated soils at the Baird and McGuire Superfund site in Holbrook, Massachusetts. The purpose of these tests was to evaluate the incinerability of these soils in terms of the fate of arsenic and lead and the destruction of organic contaminants during the incineration process. The test program consisted of a series of bench-scale experiments with a muffle furnace and a series of incineration tests in a pilot-scale rotary kiln incinerator system. The study reported in this paper was funded by the Environmental Protection Agency under Contract 68–C9–0038 to Acurex Corporation. It has been subjected to the Agency's review and has been approved for publication. Mention of trade names or commercial products does not constitute endorsement or recommendation for use.     

Carpal tunnel syndrome in occupational medicine practice.

Work-related overload syndromes are chiefly associated with the upper limbs, where carpal tunnel syndrome (CTS) plays a leading role. This article analyses methods of diagnosing CTS, with special emphasis on those that can be used by physicians in early diagnosis of CTS in workers doing monotonous work. It also discusses occupational (e.g., assembly work, typing, playing instruments, packaging and work associated with the use of a hammer or pruning scissors) and extra-occupational factors (e.g., post-traumatic deformation of bone elements of the carpal tunnel, degenerative and inflammatory changes in tendon sheaths, connective tissue hypertrophy or formation of crystal deposits) leading to CTS; diagnostic methods (subjective symptoms, physical examination and manual provocative tests, vibration perception threshold, electrophysiological examination and imaging methods); and therapeutic and preventive management tools accessible in occupational medicine practice.     

Workers' active involvement in the improvement of occupational safety and health in a textile enterprise--a case study.

Part of the Polish-Swedish OSHMAN project was carried out in a textile company. It aimed at implementing and improving effective health and safety management with workers' active involvement at all levels of the enterprise. The two main problems to be solved during the project were decreasing occupational risk and improving workers' poor knowledge on occupational risk. Training courses, workshops and practical activities were undertaken. As expected, there were changes in work organisation and improvement in the way workstations were looked after, which led to a decrease in occupational risk. Workers were highly committed during the project. Nevertheless it seems that more training should be directed at middle management.     

Monitoring of platinum in the environment

Since the introduction of catalytic converters for the control of vehicle emission, a controversial discussion has begun on platinum emission and its eventual consequences for the environment. This brief overview covers the main aspects of anthropogenic emission of platinum and its bioavailability. Modern analytical methods for Pt determination in different environmental samples are also presented.     

Review of corporate environmental indicators

This paper reviews a series of environmental indicators developed in the last years that were found suitable to be applied at corporate level for the evaluation of production processes and products. The indicators reviewed in this paper were classified into four main groups: 1) Indicators of Energy and Material Flows; 2) Indicators with a Territorial Dimension; 3) Indicators of Life-Cycle Assessment; 4) Indicators of Environmental Risk Assessment. Integrative and single index indicators such as the ecological footprint or carbon footprint were found as the most appealing for enterprises, although there is a need to advance in the field to combine the simplicity required at corporate level for tracking and reporting environmental data, and the scientific rigor and transparency necessary to make the scores reliable. Hence, for each of the indicators revised it was stated what they do and do not measure so that misleading information was not used for decision making at corporate level.