Increasing the application of gas engines to decrease China’s GHG emissions

This paper employs a review of the technical literature to estimate the potential decrease in greenhouse gas (GHG) emissions that could be achieved by increasing the application of gas engines in China in three sectors: urban public transport vehicle; shipping; and thermal power plants. China’s gas engine development strategies and three types of gas resource are discussed in the study, which indicates that gas engines could decrease GHG emissions by 520 megatonnes (Mt) of carbon dioxide equivalent (CO_2e) by 2020. This would account for 9.7 % of the government’s target for decreasing GHG emissions and is dominated by methane recovery from the use of coal mine gas (CMG) and landfill gas (LFG) for power generation. In the public urban transport vehicle and shipping sectors the low price of natural gas and the increasing demand for the control of harmful emissions could spur the rapid uptake of gas engine vehicles. However, the development of CMG- and LFG-fuelled power plants has been limited by the unwillingness of local enterprises to invest in high-performance gas engine generators and the associated infrastructure. Therefore, further compulsory policies that promote CMG use and LFG recovery should be implemented. Moreover, strict regulations on limiting methane leakage during the production and distribution of gas fuels are urgently needed in China to prevent leakage causing GHG emissions and largely negating the climate benefits of fuel substitution. Strategies for increasing the application of gas engines, promoting gas resources and recovering methane in China are instrumental in global GHG mitigation strategies.     

地表参数对面源大气预测结果的影响性分析研究

为了研究地表参数取值对AERMOD中面源模拟预测浓度值的影响,文章通过改变粗糙度、反照率和波文比的取值来进行不同地表参数与预测结果的相关性分析,同时采用正交试验法来研究不同地表参数对预测结果的敏感性.相关性分析表明,不同地表参数和预测结果有着很高的相关性.敏感性分析表明,反照率数值变化对小时最大落地浓度的敏感性最大,粗糙度数值变化对日均和年均最大落地浓度的敏感性最大.通过研究可以看出在面源大气预测过程中合理选择地表参数值是准确预测的前提.     

遂宁市主城区环境空气质量现状及原因分析研究

利用遂宁市2017年1月份4个国控环境空气自动监测数据,分析了遂宁市主城区环境空气质量现状,与整个成渝地区和周边城市的空气质量进行了横向比较,并阐述了遂宁市空气质量变化的原因.结果发现遂宁市主城区2017年1月份空气质量指数的范围为32～203,优良率为54.8％,首要污染物为PM2.5,空气质量同比下降了22.8％,环比下降了26.1％,但均显著优于成渝地区和周边城市的平均水平,并从4个方面阐述了空气质量下降的原因.最后,根据遂宁市大气污染现状,提出了4条针对性的防治措施.     

土壤镉污染的现状及修复研究进展

镉是一种对人类和动物健康危害严重的重金属。土壤镉污染问题已经成为全球研究热点。重点分析了镉污染土壤中镉的来源,镉对动植物、人体的危害,并提出了对镉污染土壤的修复的方法。     

Pb(II) removal from water using Fe-coated bamboo charcoal with the assistance of microwaves

Bamboo charcoal(BC) was used as starting material to prepare iron-modified bamboo charcoal(Fe-MBC) by its impregnation in FeCl 3 and HNO 3 solutions simultaneously,followed by microwave heating.The material can be used as an adsorbent for Pb(Ⅱ) contaminants removal in water.The composites were prepared with Fe molar concentration of 0.5,1.0 and 2.0 mol/L and characterized by means of N 2 adsorption-desorption isotherms,X-ray diffraction spectroscopy(XRD),scanning electron microscopy coupled with energy dispersive X-ray spectrometry(SEM-EDS),Fourier transform infrared(FT-IR) and point of zero charge(pH pzc) measurements.Nitrogen adsorption analyses showed that the BET specific surface area and total pore volume increased with iron impregnation.The adsorbent with Fe molar concentration of 2 mol/L(2Fe-MBC) exhibited the highest surface area and produced the best pore structure.The Pb(Ⅱ) adsorption process of 2Fe-MBC and BC were evaluated in batch experiments and 2Fe-MBC showed an excellent adsorption capability for removal Pb(Ⅱ).The adsorption of Pb(Ⅱ) strongly depended on solution pH,with maximum values at pH 5.0.The ionic strength had a significant effect on the adsorption at pH < 6.0.The adsorption isotherms followed the Langmuir isotherm model well,and the maximum adsorption capacity for Pb(Ⅱ) was 200.38 mg/g for 2Fe-MBC.The adsorption processes were well fitted by a pseudo second-order kinetic model.Thermodynamic parameters showed that the adsorption of Pb(Ⅱ) onto Fe-MBC was feasible,spontaneous,and exothermic under the studied conditions,and the ion exchange mechanism played an significant role.These results have important implications for the design of low-cost and effective adsorbents in the removal of Pb(Ⅱ) from wastewater.     

Adsorption of 2-mercaptobenzothiazole from aqueous solution by organo-bentonite

The adsorption behavior of 2-mercaptobenzothiazole onto organo-bentonite was investigated.Natural bentonite from Gaozhou in Guangdong Province,China was collected.Organo-bentonite was prepared by intercalation of cetyltrimethyl ammonium bromide into the natural bentonite.The physicochemical properties of the prepared organo-bentonite were characterized by X-ray diffraction,N2 adsorption-desorption isotherm and Fourier transform infrared spectroscopy.The results showed that montmorillonite is the main component of the natural bentonite.The basal spacing of the natural bentonite is 1.47 nm,which increased to 1.98 nm on intercalation with cetyltrimethyl ammonium bromide.Moreover,both the surface area and pore volume increased with intercalation.Clear CH2 stretching(3000-2800 cm-1) and scissoring(1480-1450 cm-1) modes of the intercalated surfactants were observed for organobentonite.Compared with the pseudo first-order kinetic model,the pseudo second-order kinetic model is more suitable to describe the adsorption kinetics of 2-mercaptobenzothiazole onto organo-bentonite.The adsorption capacity of 2-mercaptobenzothiazole onto organo-bentonite increased with increasing initial concentration of 2-mercaptobenzothiazole,but decreased with increasing adsorbent dosage.The adsorption isotherm of 2-mercaptobenzothiazole onto organo-bentonite fits well with the Langmuir model.The maximum adsorption capacity of organo-bentonite for 2-mercaptobenzothiazole was 33.61 mg/g,indicating that organo-bentonite is a promising adsorbent for 2-mercaptobenzothiazole.     

Supercritical water oxidation of polyvinyl alcohol and desizing wastewater：Influence of NaOH on the organic decomposition

Polyvinyl alcohol is a refractory compound widely used in industry. Here we report supercritical water oxidation of polyvinyl alcohol solution and desizing wastewater with and without sodium hydroxide addition. However, it is difficult to implement complete degradation of organics even though polyvinyl alcohol can readily crack under supercritical water treatment. Sodium hydroxide had a significant catalytic effect during the supercritical water oxidation of polyvinyl alcohol. It appears that the OH ion participated in the C-C bond cleavage of polyvinyl alcohol molecules, the CO2-capture reaction and the neutralization of intermediate organic acids, promoting the overall reactions moving in the forward direction. Acetaldehyde was a typical intermediate product during reaction. For supercritical water oxidation of desizing wastewater, a high destruction rate (98.25%) based on total organic carbon was achieved. In addition, cases where initial wastewater was alkaline were favorable for supercritical water oxidation treatment, but salt precipitation and blockage issues arising during the process need to be taken into account seriously.     

化工业清洁生产技术措施分析

化工业是导致环境污染的主要产业.当前,我国的化工产业所采用的生产方式仍然是传统的粗放式生产,给我国的生态环境带来了很大的压力.在这种情况下,除了转变生产方式之外,最有效的方法就是采用清洁生产技术.文章通过在化工业生产中使用清洁原料、使用清洁化学反应、使用清洁反应介质、使用清洁水处理技术等多个方面,对化工业清洁生产技术进行了系统性的分析,为广大化工业研究、生产人员提供了参考.     

适应性环境管理模式在大型赛事筹备中的应用（上）——管理模式构建

针对我国环境保护行政管理存在的直线式管理、缺乏弹性等问题,将适应性管理的理论和方法引入环境管理领域,提出适应性环境管理的概念和管理模式,通过构建基于AHP（层次分析法）的适应性环境管理绩效评估体系,在环境管理中对各项任务进行跟踪管理和绩效评估,反馈于阶段性目标的制定,从而灵活调整工作方案,最大限度地降低环境管理中的不确定性,保证环境管理总目标的达成.     

PHAST软件对孔洞泄漏扩散危险区域的分析

运用PHAST软件研究泄漏孔径、风速、泄漏时间和大气稳定度对泄漏扩散面积的影响。结果表明:扩散面积随着泄漏孔径的增大、风速的增大及泄漏时间的增长而增加;大气越稳定,泄漏扩散面积越大。