Making chlorine greener: performance of alternative dechlorination agents in wastewater

The residual chlorine in chlorine-disinfected and dechlorinated wastewater was characterized using a liquid chromatograph that was switched between reversed-phase separation and flow injection analysis modes, permitting measurement of fractionated and total residual chlorine, respectively. Residuals were detected in the effluent of an operating wastewater treatment plant employing chlorine disinfection and sulfite dechlorination. Despite dechlorination, an estimated total residual chlorine of 3 microM (0.2 ppm as Cl2) was detected in the effluent. To improve dechlorination effectiveness, four alternative agents (ascorbic acid, iron, sulfite plus iodide mediator, thiosulfate) were compared to sulfite on laboratory-chlorinated wastewater. Listed in order of decreasing relative effectiveness, we found: iron metal > sulfite plus iodide approximately = thiosulfate > sulfite > ascorbic acid. Only the iron metal column was completely effective at rapidly removing all traces of residual chlorine.     

Airborne emissions of mercury from municipal solid waste. I: new measurements from six operating landfills in Florida

Mercury-bearing material enters municipal landfills from a wide array of sources, including fluorescent lights, batteries, electrical switches, thermometers, and general waste; however, the fate of mercury (Hg) in landfills has not been widely studied. Using automated flux chambers and downwind atmospheric sampling, we quantified the primary pathways of Hg vapor releases to the atmosphere at six municipal landfill operations in Florida. These pathways included landfill gas (LFG) releases from active vent systems, passive emissions from landfill surface covers, and emissions from daily activities at each working face (WF). We spiked the WF at two sites with known Hg sources; these were readily detected downwind, and were used to test our emission modeling approaches. Gaseous elemental mercury (Hg(O)) was released to the atmosphere at readily detectable rates from all sources measured; rates ranged from approximately 1-10 ng m(-2) hr(-1) over aged landfill cover, from approximately 8-20 mg/hr from LFG flares (LFG included Hg(O) at microg/m3 concentrations), and from approximately 200-400 mg/hr at the WF. These fluxes exceed our earlier published estimates. Attempts to identify specific Hg sources in excavated and sorted waste indicated few readily identifiable sources; because of effective mixing and diffusion of Hg(O), the entire waste mass acts as a source. We estimate that atmospheric Hg releases from municipal landfill operations in the state of Florida are on the order of 10-50 kg/yr, substantially larger than our original estimates, but still a small fraction of current overall anthropogenic losses.     

Numerical methods for improving sensitivity analysis and parameter estimation of virus transport simulated using sorptive-reactive processes

Using one- and two-dimensional homogeneous simulations, this paper addresses challenges associated with sensitivity analysis and parameter estimation for virus transport simulated using sorptive-reactive processes. Head, flow, and conservative- and virus-transport observations are considered. The paper examines the use of (1) observed-value weighting, (2) breakthrough-curve temporal moment observations, and (3) the significance of changes in the transport time-step size. The results suggest that (1) sensitivities using observed-value weighting are more susceptible to numerical solution variability, (2) temporal moments of the breakthrough curve are a more robust measure of sensitivity than individual conservative-transport observations, and (3) the transport-simulation time step size is more important than the inactivation rate in solution and about as important as at least two other parameters, reflecting the ease with which results can be influenced by numerical issues. The approach presented allows more accurate evaluation of the information provided by observations for estimation of parameters and generally improves the potential for reasonable parameter-estimation results.     

Effects of Metal Mining and Milling on Boundary Waters of Yellowstone National Park, USA

/ Aquatic resources in Soda Butte Creek within Yellowstone National Park, USA, continue to be threatened by heavy metals from historical mining and milling activities that occurred upstream of the park's boundary. This includes the residue of gold, silver, and copper ore mining and processing in the early 1900s near Cooke City, Montana, just downstream of the creek's headwaters. Toxicity tests, using surrogate test species, and analyses of metals in water, sediments, and macroinvertebrate tissue were conducted from 1993 to 1995. Chronic toxicity to test species was greater in the spring than the fall and metal concentrations were elevated in the spring with copper exceeding water quality criteria in 1995. Tests with amphipods using pore water and whole sediment from the creek and copper concentrations in the tissue of macroinvertebrates and fish also suggest that copper is the metal of concern in the watershed. In order to understand current conditions in Soda Butte Creek, heavy metals, especially copper, must be considered important factors in the aquatic and riparian ecosystems within and along the creek extending into Yellowstone National Park.KEY WORDS: Mining; Metals; Toxicity; Biomonitoring; Copper; Yellowstone National Park     

The role of percutaneous umbilical blood sampling in the management of immune thrombocytopenic purpura

On consultation, percutaneous umbilical blood sampling (PUBS) was offered to women with immune thrombocytopenic purpura (ITP) to determine the mode and site of delivery prior to labour. Between January 1989 and December 1993, 41 pregnant women underwent PUBS. All women had a history of ITP, a platelet count less than 90 K, (+) antiplatelet antibody, and/or thrombocytopenia diagnosed early in pregnancy. PUBS was performed at term except in one patient with preterm labour, who underwent PUBS at 31 weeks' gestation. Patients with fetal platelet counts greater than 50 K returned to their referring physician for delivery. Records were complete in 39 pregnancies. Fetal blood was successfully obtained in 37 of 39 cases (95 per cent). Fetal platelet counts correlated with neonatal platelet counts in 36 of 37 cases (97 per cent). The interval between PUBS and delivery ranged from 0 to 31 days. Six of 37 fetuses (16 per cent) had significant fetal thrombocytopenia (<50 K). These six patients underwent Caesarean section. Vaginal delivery was recommended in all others. There were two procedure-related complications. There were no cases of intraventricular haemorrhage in any of the neonates. In conclusion, there is a high incidence of fetal thrombocytopenia in women with ITP. PUBS reliably detects fetal thrombocytopenia and is therefore useful in the perinatal planning of the mode and site of delivery.     

Prenatal diagnosis of fragile X syndrome: Management of the male fetus with a premutation

Direct detection of the fragile X mutation by DNA analysis has greatly simplified prenatal diagnosis of this disease. However, women carrying a fragile X premutation may pass their expanded trinucleotide repeat to sons without expansion to a full mutation. Such sons are predicted to be intellectually normal. In this situation, the accuracy with which the fetal status can be inferred from analysis of chorionic villus sample (CVS) DNA is unclear. We describe such a case, in which it was felt necessary to proceed to fetal blood sampling despite technically unambiguous DNA results from the CVS. The lack of prospective data means that this dilemma may be expected to recur over the next few years when performing prenatal diagnosis on fragile X premutation carriers.     

Understanding non-industrialized workers' approaches to safety: How do commercial fishermen “stay safe”?

BACKGROUND: Commercial fishing is carried out worldwide, often in non-industrialized forms, and is associated with high rates of fatal and non-fatal occupational injury. PROBLEM: Fishermen who work independently in non-industrialized settings do not have access to union or industry sponsored safety services and must make their own decisions about safety practices. Learning the meaning of safety for them and the safety measures they employ is important before developing interventions. METHODS: Two fieldworkers conducted in-depth ethnographic interviews with 31 commercial fishermen in North Carolina. Interviews and fieldnotes were analyzed using QSR N5. RESULTS: Fishermen primarily related staying safe to work practices and attitudes. They identified specific safety measures, appropriate gear and boat maintenance, weather decisions, and working cooperatively when ocean fishing. DISCUSSION: The ethnographic research process can produce information about a group's norms of preventive behavior and safety concerns. Knowledge of workers' concepts and practices will inform researchers' inquiries.     

Prediction of DOM removal of low specific UV absorbance surface waters using HPSEC combined with peak fitting

High performance size exclusion chromatography (HPSEC) is used in water quality research primarily to determine the molecular weight distribution of the dissolved organic matter (DOM), but by applying peak fitting to the chromatogram, this technique can also be used as a tool to model and predict DOM removal. Six low specific UV absorbance (SUVA) source waters were treated using coagulation with alum and both the source and treated water samples were analysed using HPSEC. By comparing the molecular weight profiles of the source and treated waters, it was established that several DOM components were not effectively removed by alum coagulation even after high dosage alum treatment. A peak-fitting technique was applied based on the concept of linking the character (molecular weight profile) of the recalcitrant organics in the treated water with those of the source water. This was then applied to predict DOM treatability by determining the areas of the peaks which were assigned to removable organics from the source water molecular weight profile after peak fitting, and this technique quantified the removable and non-removable organics. The prediction was compared with the actual dissolved organic carbon (DOC) removal determined from jar testing and showed good agreement, with variance between 2% and 10%. This confirmed that this prediction approach, which was originally developed for high SUVA waters, can also be applied successfully to predict DOC removal in low SUVA waters.