Enzymatic treatment of estrogens and estrogen glucuronide

Natural and synthetic estrogens from sewage treatment systems are suspected to influence the reproductive health of the animals in the rivers.In this article we investigated the enzymatic treatment of three estrogens (estrone,17β-estradiol,and 17α-ethynyletstradiol) by a fungal laccase which oxidize phenolic compounds with dissolved oxygen.The elimination of the estrogenic activities by enzymatic oxidation was demonstrated by medaka vitellogenin assay.In addition,we developed an enzymatic treatment system comprised of β-D-glucuronidase and the laccase for 17β-estradiol 3-(β-D-glucuronide) degradation.The two enzymes eliminated 17β-estradiol 3-(β-D-glucuronide) and the intermediate,17β-estradiol,efficiently.     

A fate model of pathogenic viruses in a composting toilet based on coliphage inactivation

A composting toilet using sawdust as a matrix has the potential to trap pathogens that might occasionally be contained in human feces. Therefore, care should be taken when handling the sawdust. It should also be noted that pathogenic viruses tend to have stronger tolerance than pathogenic bacteria. The fates of several species of coliphages, T4, , Q and MS2, in sawdust were investigated as a viral model. The fates of coliphages were significantly different among them, and they changed in response to temperature and the water content of the sawdust. As the results, T4 coliphage had the strongest tolerance and Q had the weakest one in sawdust. It was estimated the days required to decrease virus to a safe level based on a risk assessment. According to the rates of Q and T4, 15 days and 167 days were required respectively for a safe level of infection risk based on actually operated composting toilet condition. Thus, it was significantly different depending on the species and sawdust conditions.     

Analysis method for PCBs in reclaimed oil using a fast-GC triple stage quadrupole mass spectrometer with the 13-component quantitation method

It is necessary for companies supplying reclaimed oil to analyze polychlorinated biphenyls (PCBs), because there is a possibility of the presence of contaminants due to trace-level PCBs in the reclaimed oil. However, common analysis methods of PCBs are time-consuming and complicated. Fast-GC triple stage quadrupole mass spectrometer with the 13-component quantitation method is an official method for analyzing PCBs in insulating oil in Japan. This method is extremely fast and simplified. The purpose of this study involves an investigation of the aforementioned fast and simple method for potential use in the analysis of reclaimed oil. Furthermore, it was attempted to combine the method with sample preparation involving only hexane dilution. The effect of sample dilutions corresponding to 100, 300, and 500 times was evaluated for reducing the matrix effect. The matrix effect was suppressed at a dilution ratio equal to or exceeding 300 times. Calibration curves of four points, namely 0.01, 0.05, 0.1, and 0.5 ng/mL, (ignored origin) by using an internal standard method were prepared for the 13 components. The square of regression coefficient (R²) values of all calibration curves exceeded 0.997. This method was adopted for the analysis of reclaimed oil containing 0.5 μg/mL PCBs, which corresponds to the judgment criteria, and accurate quantitation (accuracy value, 94.0–102%) and good repeatability (%RSD, 3.6%) were obtained. Furthermore, the required sensitivity was maintained even when 800 samples were analyzed without a cleaning ion source and an exchanging analysis column.     

Water extraction with CO2 bubbling as pretreatment of melting-furnace fly ash for metal recovery

In Japan, melting-furnace fly ash (MFA) generated from ash melting and gasification/melting plants is considered an “urban mine” due to its high metal content. This study aimed to develop a novel approach to pretreating MFA for metal recovery. Water extraction with CO₂ bubbling was investigated because MFA mainly consists of water-soluble salts containing elements such as Cl, Ca, Na, and K. Instead of acid addition, CO₂ bubbling was applied to maintain the optimal pH for minimizing the release of target metal elements and maximizing the removal of undesirable elements during water extraction. The results revealed that CO₂ bubbling effectively decreased the release of Pb, Zn, and Cd into the treatment water. This was mainly due to coprecipitation with CaCO₃, which was primarily formed by the reaction of Ca²⁺ from the MFA with CO₃ ²⁻ from the CO₂ gas. The bubbling process also helped accelerate the removal of Cl from MFA. Furthermore, the study showed that it is possible to lower the water-to-solid ratio to 5 with only a slight reduction in water extraction effect. Finally, approximately four times the concentration of target metals (rare metals and Cu, Pb, and Zn) was achieved by removing 90% of Cl, 70%–90% of Na and K, and 30%–40% of Ca through water extraction with CO₂ bubbling, resulting in a concentration of target metals that was nearly equal to that of ore.     

Chemical absorption process for degradation of VOC gas using heterogeneous gas-liquid photocatalytic oxidation: toluene degradation by photo-Fenton reaction

A novel process for degradation of toluene in the gas-phase using heterogeneous gas-liquid photocatalytic oxidation has been developed. The degradation of toluene gas by photo-Fenton reaction in the liquid-phase has experimentally examined. The photo-Fenton reaction in the liquid-phase could improve the overall toluene absorption rate by increasing the driving force for mass transfer and as a result enhance the removal of toluene in the exhaust gas. The toluene concentrations in the inlet gas were varied in the range from 0.0968 to 8.69gm(-3) with initial hydrogen peroxide concentration of 400mgl(-1) and Fe dose of 5.0mgl(-1). It was found that toluene in the inlet gas was almost completely dissolved into water and degraded in the liquid-phase for the inlet toluene gas concentration of less than 0.42gm(-3). The dynamic process of toluene gas degradation by the photo-Fenton reaction providing information for reaction kinetics and mass transfer rate was examined. Toluene removal kinetic analysis indicated that photo-Fenton degradation was significantly affected by H(2)O(2) concentration. The experimental results were satisfactorily described by the predictions simulated using the simplified tanks-in-series model combined with toluene removal kinetic analysis. The present results showed that the proposed chemical absorption process using the photo-Fenton heterogeneous gas-liquid photocatalytic oxidation is very effective for degradation of volatile organic gases.     

Polychlorinated biphenyl levels in the blood of Japanese individuals ranging from infants to over 80 years of age

Individuals’ exposure to various persistent organic pollutants (POPs), including polychlorinated biphenyls (PCBs), and its adverse health effects have been a cause of concern. We measured blood PCB concentrations from samples taken from 507 Japanese individuals ranging from infants to those over 80 years of age. The blood PCB levels increased with age for both male (Spearman’s r?=?0.69, p?<?0.001) and female (Spearman’s r?=?0.70, p?<?0.001) participants. Adult men and nulliparous women showed similar increases with age. However, the PCB levels of multiparous women were lower than those of nulliparous women in their thirties (p?=?0.005), probably because the PCBs were transferred from the mothers to their children during pregnancy and lactation. Among infants (<2 years of age), some had as high levels of accumulated PCB levels as those in adults >30 years of age. In some cases, the PCB levels were over 0.8 ng/g wet weight, similar to levels observed in adults over 50 years of age. In the future, it will be necessary to do research on the health of the children who are exposed by high concentration level of POPs.     

Zeolite formation from coal fly ash and heavy metal ion removal characteristics of thus-obtained Zeolite X in multi-metal systems

Zeolitic materials have been prepared from coal fly ash as well as from a SiO₂–Al₂O₃ system upon NaOH fusion treatment, followed by subsequent hydrothermal processing at various NaOH concentrations and reaction times. During the preparation process, the starting material initially decomposed to an amorphous form, and the nucleation process of the zeolite began. The carbon content of the starting material influenced the formation of the zeolite by providing an active surface for nucleation. Zeolite A (Na-A) was transformed into zeolite X (Na-X) with increasing NaOH concentration and reaction time. The adsorption isotherms of the obtained Na-X based on the characteristics required to remove heavy ions such as Ni²⁺, Cu²⁺, Cd²⁺ and Pb²⁺ were examined in multi-metal systems. Thus obtained experimental data suggests that the Langmuir and Freundlich models are more accurate compared to the Dubinin–Kaganer–Radushkevich (DKR) model. However, the sorption energy obtained from the DKR model was helpful in elucidating the mechanism of the sorption process. Further, in going from a single- to multi-metal system, the degree of fitting for the Freundlich model compared with the Langmuir model was favored due to its basic assumption of a heterogeneity factor. The Extended-Langmuir model may be used in multi-metal systems, but gives a lower value for equilibrium sorption compared with the Langmuir model.