Extraction and cleanup methods of dioxins in house dust from two cities in Japan using accelerated solvent extraction and a disposable multi-layer silica-gel cartridge

A simple and rapid method for the extraction and cleanup of dioxins from house dust was developed using an accelerated solvent extraction (ASE) method and a multi-layer silica-gel cartridge. It was found that the WHO-TEQ levels of dioxins extracted from the house dust obtained by both a conventional soxhlet extraction and the ASE were almost equal, when the data obtained by both methods were compared. As for the cleanup method, a multi-layer silica-gel cartridge yielded higher dioxin recoveries than the alkaline digestion method. The average values of the dioxins in house dust from Kumagaya city and Sendai city in Japan (Sendai city is bigger than Kumagaya city with respect to the population and industry), were 15.6 pg TEQ/g (8.6-26.0 pg TEQ/g, n=5, Kumagaya city) and 16.0 pg TEQ/g (5.9-30.5 pg TEQ/g, n=5, Sendai city), respectively.     

Effects of the tsunami on fisheries and coastal livelihood: a case study of tsunami-ravaged southern Sri Lanka

Beyond the death toll, the tsunami of 26 December 2004 crippled many of the livelihood assets (human, social, physical, financial and natural) available to assist those directly affected. Drawing on surveys of three villages in three districts in the south of Sri Lanka, this paper describes the livelihood asset building capacity of the fishing communities. Assessments are also made of the impact of the tsunami on coastal communities and the impact of government policy on rebuilding. A livelihood asset score was calculated for each village by comparing their strengths in capacity building. In all aspects of capital building, including human, social, financial, physical and natural capital, the fishing community in Tangalle was significantly ahead of the fishing communities in Hikkaduwa and Weligama. Experienced fishermen with better educational backgrounds had a significant influence on the capacity building of livelihood assets. Relocation and resettlement plans brought persistent uncertainty to fishermen in Hikkaduwa and Weligama and threatened to disrupt their community bonds and social networks.     

Urinary concentrations of organophosphorus insecticide metabolites in Japanese workers

A recent development in analytical chemistry has enabled us to monitor systemic organophosphorus insecticide (OP) exposure at individual levels. At present, however, limited data are currently available on urinary OP metabolite levels worldwide. The purpose of this study was to assess urinary dialkylphosphate (DAP) concentrations in Japanese workers. Urine samples were collected in both summer and winter from 339 Japanese adults who worked as food distributors (FDs, n = 164), apple farmers (AFs, n = 147) and pest control operators (PCOs, n = 28). DAPs were measured by gas chromatography-mass spectrometry after derivatization with pentafluorobenzylbromide. Dimethylphosphate (DMP), diethylphosphate (DEP), dimethylthiophosphate (DMTP) and diethylthiophosphate (DETP) were detected in the urine of over 87% of the studied populations in both seasons. The geometric mean values of total DAPs (nmol g⁻¹ creatinine), DMP, DMTP, DEP and DETP (μg g⁻¹ creatinine) in summer and winter were 106.7 and 98.3, 7.0 and 3.8, 3.4 and 4.5, 0.8 and 1.5, and 0.3 and 0.2 for the FDs, 440.8 and 197.7, 33.1 and 10.8, 10.1 and 5.8, 4.2 and 4.7 and 1.6 and 0.8 for the AFs, and 473.4 and 284.6, 28.9 and 22.2, 17.6 and 4.6, 3.5 and 4.4, and 0.5 and 0.6 for the PCOs, respectively, thereby revealing significantly higher concentrations in AFs and PCOs groups than in the FDs in both seasons except for winter DMTP. These DAP concentrations were approximately the same or at lower levels compared with those reported in the previous literature. This is one of the first studies to demonstrate urinary DAP concentrations in Japanese adults.     

A GIS-based zoning of illegal dumping potential for efficient surveillance

To assist in the efficient surveillance against illegal dumping, this study examined and evaluated two methods to illustrate the illegal dumping potential of sites using GIS (Geographic Information System) data. One approach focused on the occurrence of illegal dumping sites; the other on the size of the illegal dumping. Both approaches to zoning were implemented for the Kanto region of Japan, utilizing seven or eight major geographical attributes most closely related to illegal dumping. The zoning results revealed the areas requiring patrols against illegal dumping. Evaluation of the zoning results using the ROC (Receiver Operating Characteristic) curve showed the number of illegal dumping sites detectable under certain surveillance conditions and that the size-based zoning was superior, but this superiority was insignificant for revealing sites with higher potential for large illegal dumping, for which it would be sufficient to use the occurrence-based zoning. The evaluation also showed the contribution of each geographical attribute. Finally, application of the ROC curve to the surveillance planning process was examined, which enables the total social cost of pollution by illegal dumping, rehabilitation of dumping sites, and illegal dumping surveillance to be minimized.     

Biobased Contents of Organic Fillers and Polycaprolactone Composites with Cellulose Fillers Measured by Accelerator Mass Spectrometry Based on ASTM D6866

The biobased contents of raw materials such as starches, sugar, chitin, or wood powders for biomass plastics were measured using Accelerator Mass Spectrometry (AMS) based on ASTM D6866. AMS measures the isotope carbon ratio of ¹⁴C to ¹²C and ¹³C in graphite derived from sample powders. The biobased contents of starches, sugar or chitin were almost 100% which means that they are fully biobased. The biobased contents of the wood powders were over 140% due to the effect of the post 1950s ¹⁴C injection due to nuclear testing. Poly(ε-caprolactone) (PCL) composite samples were prepared using the polymerization and direct molding method. The starting compound was the ε-caprolactone monomer liquid combined with cellulose and inorganic fillers using aluminum triflate as a catalyst at 80 °C for 6 or 24 h. PCL cylinder-shaped composite samples with a homogeneously dispersed cellulose filler were prepared with M_n = 4,600 (M_w/M_n = 2.9). The biobased content of the PCL composite with 50 wt% cellulose filler (51.67%) measured using AMS was slightly higher than the carbon ratio of cellulose in the starting powder samples (41.3 mol%). This is due to the higher biobased content (112.70%) of the cellulose filler used in this study. The biobased content of the polymer composite powders by AMS was found not to be affected by the presence of inorganic fillers, such as talc.     

Rate of hexabromocyclododecane decomposition and production of brominated polycyclic aromatic hydrocarbons during combustion in a pilot-scale incinerator

Here, we examined the incineration of extruded polystyrene containing hexabromocyclododecane(HBCD) in a pilot-scale incinerator under various combustion temperatures(800–950℃) and flue gas residence times(2–8 sec). Rates of HBCD decomposition ranged from 99.996%(800℃, 2 sec) to 99.9999%(950℃, 8 sec); the decomposition of HBCD, except during the initial stage of combustion(flue gas residence time 2 sec), followed a pseudo-first-order kinetics model. An Arrhenius plot revealed that the activation energy and frequency factor of the decomposition of HBCD by combustion were 14.2 kJ/mol and 1.69 sec~(-1),respectively. During combustion, 11 brominated polycyclic aromatic hydrocarbons(BrPAHs)were detected as unintentional by-products. Of the 11 BrPAHs detected, 2-bromoanthracene and 1-bromopyrene were detected at the highest concentrations. The mutagenic and carcinogenic BrPAHs 1,5-dibromoanthracene and 1-bromopyrene were most frequently detected in the flue gases analyzed. The total concentration of BrPAHs exponentially increased(range,87.8–2,040,000 ng/m~3) with increasing flue gas residence time. Results from a qualitative analysis using gas chromatography/high-resolution mass spectrometry suggest that bromofluorene and bromopyrene(or fluoranthene) congeners were also produced during the combustion.     

Blue carbon in human-dominated estuarine and shallow coastal systems

Estuarine and shallow coastal systems (ESCS) are recognized as not only significant organic carbon reservoirs but also emitters of CO₂ to the atmosphere through air–sea CO₂ gas exchange, thus posing a dilemma on ESCS’s role in climate change mitigation measures. However, some studies have shown that coastal waters take up atmospheric CO₂ (C_atm), although the magnitude and determinants remain unclear. We argue that the phenomenon of net uptake of C_atm by ESCS is not unusual under a given set of terrestrial inputs and geophysical conditions. We assessed the key properties of systems that show the net C_atm uptake and found that they are often characteristic of human-dominated systems: (1) input of high terrestrial nutrients, (2) input of treated wastewater in which labile carbon is highly removed, and (3) presence of hypoxia. We propose that human-dominated ESCS are worthy of investigation as a contributor to climate change mitigation.     

Estimating the amount of WEEE generated in South Korea by using the population balance model

We estimated the amount of waste electrical and electronic equipment (WEEE) generated in South Korea by using the population balance model (PBM) based on a lifespan distribution analysis. This is the first study to apply PBM to estimate WEEE generation in South Korea. The lifespan distribution analysis of electrical and electronic equipment (EEE) was based on the results of a questionnaire survey of 1000 households, which were analyzed with the Weibull distribution. As a result, we could estimate the domestic service lifespan and lifespan distribution shape parameter for eight selected products. Using the lifespan distribution analysis and other data, such as the shipment volume and the number of products owned by households, we estimated the amount of WEEE generated for the eight selected items from 2000 to 2020. We found that 1.2 million air conditioners, 2.5 million televisions, 1.3 million microwave ovens, 1.2 million kimchi refrigerators, 17.0 million mobile phones, 1.7 million refrigerators, 2.0 million vacuum cleaners, and 1.4 million washing machines were generated as WEEE in 2010. We also compared our WEEE estimates with the number of items collected through the official WEEE recycling program from 2003 to 2009 and found that in 2009 washing machines had the highest collection rate (28%) and air conditioners had the lowest rate (7%).     

Biomass Carbon Ratio of Polymer Composites Measured by Accelerator Mass Spectrometry

The evaluation method of biomass carbon ratio of polymer composite samples including organic and inorganic carbons individually was investigated. Biodegradable plastics and biobased plastics can have their mechanical properties improved by combining with inorganic fillers. Polymer composites consisting of biodegradable plastics and carbonate were prepared by two different methods. Poly(lactic acid) (PLA) composite was prepared by synthesis from l-lactide with catalyst and calcium carbonate (CaCO₃) powders from lime. Poly(butylene succinate) (PBS) composite was prepared by hot-pressing the mixture of PBS powder and CaCO₃ powders from oyster shells. The mechanical properties of composite samples were investigated by a tensile test and a compression test using an Instron type mechanical tester. Tensile test with a dumbbell shape specimen was performed for PBS composite samples and compression test with a column shape specimen for PLA composite samples. Strength, elastic modulus and fracture strain were obtained from the above tests. Biomass carbon ratio is regulated in the American Standards for Testing and Materials (ASTM). In ASTM standards on biomass carbon ratio, it is required that carbon atoms from carbonates, such as CaCO₃, are omitted. Biomass carbon ratio was evaluated by ratio of ¹⁴C to ¹²C in the samples using Accelerator Mass Spectrometry (AMS). The effect of pretreatment, such as oxidation temperature and reaction by acid, on results of biomass carbon ratio was investigated. Mechanical properties decrease with increasing CaCO₃ content. The possibility of an evaluation method of biomass carbon ratio of materials including organic and inorganic carbons was shown.