Fate of metals contained in waste electrical and electronic equipment in a municipal waste treatment process

In Japan, waste electrical and electronic equipment (WEEE) that is not covered by the recycling laws are treated as municipal solid waste. A part of common metals are recovered during the treatment; however, other metals are rarely recovered and their destinations are not clear. This study investigated the distribution ratios and substance flows of 55 metals contained in WEEE during municipal waste treatment using shredding and separation techniques at a Japanese municipal waste treatment plant. The results revealed that more than half of Cu and most of Al contained in WEEE end up in landfills or dissipate under the current municipal waste treatment system. Among the other metals contained in WEEE, at least 70% of the mass was distributed to the small-grain fraction through the shredding and separation and is to be landfilled. Most kinds of metals were concentrated several fold in the small-grain fraction through the process and therefore the small-grain fraction may be a next target for recovery of metals in terms of both metal content and amount. Separate collection and pre-sorting of small digital products can work as effective way for reducing precious metals and less common metals to be landfilled to some extent; however, much of the total masses of those metals would still end up in landfills and it is also important to consider how to recover and utilize metals contained in other WEEE such as audio/video equipment.     

Substance flow analysis of brominated flame retardants and related compounds in waste TV sets in Japan

We conducted time-series substance flow analysis of two types of brominated flame retardants (BFRs)--polybrominated diphenyl ethers (PBDEs) and tetrabromobisphenol A (TBBPA)--and two types of related compounds--Sb (used with BFRs for flame inhibition) and polybrominated dibenzo dioxins and furans (PBDDs/DFs: unintended byproducts)--in five size categories of waste TV sets in Japan. Two scenarios were created with BFR substitutions and compared to a "business as usual" scenario in order to obtain basic information for strategic product management. The results showed that the use of DecaBDE in rear and front covers of TV sets began in fiscal 1987-1990 and 1993-1996, respectively, and that TBBPA was used to some extent as a substitute for DecaBDE in the 90s. The amount of waste Br in the plastic covers is predicted to increase until at least fiscal 2020 due to the increasing size of TV sets. Although substitution of BFRs with non-BFRs in Japan by 2006 will reduce waste Br, the amount in waste TV sets will not peak until fiscal 2009. The results will help inform decisions in Japan regarding the recovery and disposal of waste TV sets. The methods used would benefit waste managers faced with similar issues in other countries.     

Utilizing a database to interpret leaching characteristics of lead from bottom ashes of municipal solid waste incinerators

This study focuses on evaluation and quantification of factors affecting leachability of lead from bottom ashes of municipal solid waste incinerators (MSWI) by utilizing a database. The database, which was constructed with data collected from sources such as research papers, questionnaires and reports, consists of 1149 data sets on 508 MSWI plants. Factors chosen as affecting lead leachability included: pH in the leachate, loss on ignition of bottom ash, total content of lead, and content of main elements such as Fe, Mn, Si and Al. The lead leachability was reduced to a minimum at neutral pH, increased with increasing pH and, especially, showed an abrupt increase at pH levels above 12. The main factor controlling the pH of the leachate appeared to be leachable Ca(2+) originating from portlandite (Ca(OH)(2)). Leaching concentration increased with increasing total contents of lead, and the relationship between leaching of lead and loss on ignition showed no distinct tendencies. The lead leaching ratio increased with decreasing total contents of Si, Mn and Fe. It is evident, therefore, that these numerous factors determine the leachability of lead in a simultaneous and complex manner.     

The cost of stratospheric climate engineering revisited

Stratospheric aerosol injection (SAI) has been receiving increasing attention as a possible option for climate engineering. Its direct cost is perceived to be low, which has implications for international governance of this emerging technology. Here, we critically synthesize previous estimates of the underlying parameters and examine the total costs of SAI. It is evident that there have been inconsistencies in some assumptions and the application of overly optimistic parameter values in previous studies, which have led to an overall underestimation of the cost of aircraft-based SAI with sulfate aerosols. The annual cost of SAI to achieve cooling of 2 W/m² could reach US$10 billion with newly designed aircraft, which contrasts with the oft-quoted estimate of “a few billion dollars.” If existing aircraft were used, the cost would be expected to increase further. An SAI operation would be a large-scale engineering undertaking, possibly requiring a fleet of approximately 1,000 aircraft, because of the required high altitude of the injection. Therefore, because of its significance, a more thorough investigation of the engineering aspects of SAI and the associated uncertainties is warranted.     

Enzymatic treatment of estrogens and estrogen glucuronide

Natural and synthetic estrogens from sewage treatment systems are suspected to influence the reproductive health of the animals in the rivers.In this article we investigated the enzymatic treatment of three estrogens (estrone,17β-estradiol,and 17α-ethynyletstradiol) by a fungal laccase which oxidize phenolic compounds with dissolved oxygen.The elimination of the estrogenic activities by enzymatic oxidation was demonstrated by medaka vitellogenin assay.In addition,we developed an enzymatic treatment system comprised of β-D-glucuronidase and the laccase for 17β-estradiol 3-(β-D-glucuronide) degradation.The two enzymes eliminated 17β-estradiol 3-(β-D-glucuronide) and the intermediate,17β-estradiol,efficiently.     

A fate model of pathogenic viruses in a composting toilet based on coliphage inactivation

A composting toilet using sawdust as a matrix has the potential to trap pathogens that might occasionally be contained in human feces. Therefore, care should be taken when handling the sawdust. It should also be noted that pathogenic viruses tend to have stronger tolerance than pathogenic bacteria. The fates of several species of coliphages, T4, , Q and MS2, in sawdust were investigated as a viral model. The fates of coliphages were significantly different among them, and they changed in response to temperature and the water content of the sawdust. As the results, T4 coliphage had the strongest tolerance and Q had the weakest one in sawdust. It was estimated the days required to decrease virus to a safe level based on a risk assessment. According to the rates of Q and T4, 15 days and 167 days were required respectively for a safe level of infection risk based on actually operated composting toilet condition. Thus, it was significantly different depending on the species and sawdust conditions.     

Analysis method for PCBs in reclaimed oil using a fast-GC triple stage quadrupole mass spectrometer with the 13-component quantitation method

It is necessary for companies supplying reclaimed oil to analyze polychlorinated biphenyls (PCBs), because there is a possibility of the presence of contaminants due to trace-level PCBs in the reclaimed oil. However, common analysis methods of PCBs are time-consuming and complicated. Fast-GC triple stage quadrupole mass spectrometer with the 13-component quantitation method is an official method for analyzing PCBs in insulating oil in Japan. This method is extremely fast and simplified. The purpose of this study involves an investigation of the aforementioned fast and simple method for potential use in the analysis of reclaimed oil. Furthermore, it was attempted to combine the method with sample preparation involving only hexane dilution. The effect of sample dilutions corresponding to 100, 300, and 500 times was evaluated for reducing the matrix effect. The matrix effect was suppressed at a dilution ratio equal to or exceeding 300 times. Calibration curves of four points, namely 0.01, 0.05, 0.1, and 0.5 ng/mL, (ignored origin) by using an internal standard method were prepared for the 13 components. The square of regression coefficient (R²) values of all calibration curves exceeded 0.997. This method was adopted for the analysis of reclaimed oil containing 0.5 μg/mL PCBs, which corresponds to the judgment criteria, and accurate quantitation (accuracy value, 94.0–102%) and good repeatability (%RSD, 3.6%) were obtained. Furthermore, the required sensitivity was maintained even when 800 samples were analyzed without a cleaning ion source and an exchanging analysis column.     

Polychlorinated biphenyl levels in the blood of Japanese individuals ranging from infants to over 80 years of age

Individuals’ exposure to various persistent organic pollutants (POPs), including polychlorinated biphenyls (PCBs), and its adverse health effects have been a cause of concern. We measured blood PCB concentrations from samples taken from 507 Japanese individuals ranging from infants to those over 80 years of age. The blood PCB levels increased with age for both male (Spearman’s r?=?0.69, p?<?0.001) and female (Spearman’s r?=?0.70, p?<?0.001) participants. Adult men and nulliparous women showed similar increases with age. However, the PCB levels of multiparous women were lower than those of nulliparous women in their thirties (p?=?0.005), probably because the PCBs were transferred from the mothers to their children during pregnancy and lactation. Among infants (<2 years of age), some had as high levels of accumulated PCB levels as those in adults >30 years of age. In some cases, the PCB levels were over 0.8 ng/g wet weight, similar to levels observed in adults over 50 years of age. In the future, it will be necessary to do research on the health of the children who are exposed by high concentration level of POPs.