Continuous treatment of azo acid dyes by photo-dependent denitrifying sludge

Simultaneous removals of dye and nitrate by photo-dependent denitrifying sludge(PDDS)have been demonstrated in a continuousflow bench-scale reactor.The best C/N for the degradation of azo dyes by PDDS was 1.5.The specific removal rate of azo dye AB92 decreased with a decrease in hydraulic retention time and increased with a decrease in solids retention time.The degradation rate of TOC decreased with a decrease in hydraulic retention time.AB92,which has nitro and hydroxyl substitutions in non-para positions,was uniquely degraded.During continuous flow treatment experiments using PDDS,complete degradation of azo dyes AB92 and AO20 at influent concentrations of 40mg/L and 30mg/L,respectively,was achieved with an HRT of 16.     

Influence of coexisting surface-active agents on leachability of dioxins in raw and treated fly ash from an MSW incinerator

The leaching behavior of dioxins from raw and treated fly ash (FA) under the coexistence of several types of surface-active agents (SAAs) was examined by batch leaching tests to obtain significant information not only for evaluating leachability of dioxins as hydrophobic organic pollutants (HOPs) under the severe environment in which SAAs coexist, but also for evaluating the reduction efficiency of dioxin-leachability from the treated FA. Enhancement of dioxin-leachability by sufficient addition of SAAs was observed in the leaching test, whereas addition of a smaller quantity depressed the leachability. The higher the degree of chlorination in PCDDs/PCDFs homologues, the more effectively the SAAs enhanced the leachability. Moreover, there was a large difference in the potential for leachability enhancement due to each surface activity, based on critical micelle concentration (CMC) of the SAAs although Aldrich humic acid enhanced the leachability at a much lower concentration than CMC. A comparison of the leachability in FA treated by several methods showed a difference in the reduction efficiency of leachability, depending on the adsorption of SAAs by each treated FA.     

Sensitivity analysis of radionuclide migration in compacted bentonite: a mechanistic model approach

Mechanistic model calculations for the migration of Cs, Ra, Am and Pb in compacted bentonite have been carried out to evaluate sensitivities with respect to different parameter variations. A surface chemical speciation/electric double layer model is used to calculate: (i) porewater composition and radionuclide speciation in solution and at the bentonite surface, yielding the distribution of mobile and sorbed species and (ii) interaction of diffusing species with negatively charged pore walls to obtain diffusion parameters. The basic scenario considers the interaction of compacted bentonite with a fresh-type groundwater; variations include the presence of bentonite impurities and saline groundwater. It is shown that these scenarios result in significant variations of porewater composition that affect migration via three mechanisms that can partly compensate each other: (1) effects on sorption through radionuclide complexation in solution, and competition of major cations for surface sites; (2) changes in radionuclide solution speciation leading to different diffusing species under different conditions; (3) effects on diffusion through changes in the electric double layer properties of the clay pores as a function of ionic strength.     

Leaching of brominated flame retardants in leachate from landfills in Japan

Leachate samples were taken from seven different landfills and concentrations of brominated flame retardants (BFRs), i.e. polybrominated diphenyl ethers (PBDEs) and tetrabromobisphenol A (TBBPA), were quantified. Leaching characteristics of BFRs, especially factors affecting leachability, were clarified to obtain basic information regarding the release of BFRs into the environment. The results obtained for observed levels of the sum of PBDE-47, -99 and -100 were n.d.--4000 pg/l for the raw leachate and n.d. for the treated one, respectively, and those of TBBPA were n.d.--620,000 pg/l for the raw leachate and n.d.--11,000 pg/l for the treated one, respectively. Three sites that not only had crushed material from bulk wastes such as waste electric and electronic equipment, but also were under operation or within a year since closure, indicated a higher concentration of BFRs than the other sites. In particular extremely high concentration of PBDEs was observed at a site with a large amount of organics. Considering the leaching characteristics of BFRs, there exists the possibility that leachability of PBDEs is influenced by the presence of dissolved humic matter (DHM) in the leachate. The high removal efficiency for BFRs in the leachate treatment process was also confirmed.     

Proximate composition of household waste and applicability of waste management technologies by source separation in Hanoi,Vietnam

The organic fraction of municipal solid wastes in Southeast Asia, which has a high moisture content, accounts for a large proportion of total waste. Local governments need to pay adequate attention to the composition of wastes to determine alternative waste management technologies. This study proposed the use of a triangle diagram to describe changes in proximate composition and rates of successful source separation of municipal solid waste and to identify technical challenges about alternative waste management technologies such as incineration, composting, and refuse-derived fuel production based on physical and proximate composition analysis of household waste sampled in Hanoi, Vietnam, as a case study. The analysis indicated the effectiveness of different types of source separation as well as different levels of successful achievement of source separation as an adjustment mechanism for the proximate composition of waste. Proper categorization of wastes for source separation is necessary for the appropriate use of alternative waste management technologies. The results showed that, at a source separation rate of just greater than 0.52 in a three-way separation scheme, the waste separated as combustible waste would be suitable for incineration with energy recovery. Based on well-designed schemes of source separation, alternative waste management technologies can be applied.     

Steady state of semi-continuous anaerobic digestion of cattle manure under the stress of adding iron and titanium oxide nanoparticles

Journal of Material Cycles and Waste Management - Anaerobic digestion (AD) is a sustainable technology that combines biogas production with proper waste management. However, the operation of an...     

State of mixture of atmospheric submicrometer black carbon particles and its effect on particulate light absorption

The state of mixture of light-absorbing carbonaceous particles was investigated in relation to light absorption properties using electron microscopic examinations, black carbon (BC) analyses of quartz filter by thermal/optical reflectance (TOR) method, measurements with two continuous light-absorbing photometers at a suburban site of Tsukuba, about 60 km northeast of Tokyo. The volume fraction of water-soluble material (?) in individual particles is important for assessing particulate light-absorbing and/or scattering of atmospheric aerosols. The values of ? in BC particles were evaluated by electron micrographs before and after dialysis (extraction) of water-soluble material. The mass absorption coefficient (MAC in units of m² g^?1) tended to increase with increasing the average ? in BC particles with the radius range of 0.05–0.5 μm. Thus, our results indicate that coatings of water-soluble material around BC particles can enhance the absorption of solar radiation. Moreover, the single scattering albedo (SSA) will increase because a large amount of coating material will scatter more light.     

Leaching characteristics of polybrominated diphenyl ethers (PBDEs) from flame-retardant plastics

To investigate the effect of leachant on the leachability of polybrominated diphenyl ethers (PBDEs), we determined the leaching concentrations of PBDEs from flame-retardant plastic samples (TV housings and raw materials before molding processing) that are regarded as a source of PBDEs in landfill sites. The leachants used were distilled water, 20% methanol solution, and dissolved humic solution (DHS) of 1000 mg/l based on organic carbon. The leaching test conditions were a liquid-to-solid ratio of 100:1, and a contact period of five days, with twice-daily agitation in a temperature-controlled room of 30 degrees C without pH or ionic strength control. The leaching concentrations of PBDEs increased with increased content, and were found to be remarkably enhanced when methanol and DHS were used instead of distilled water. The enhancement of leachability in the presence of the latter was attributed to the cosolvency effect, and complex formations between the PBDEs and dissolved humic matter (DHM). PBDE concentrations in the leachate obtained from the leaching test and an actual landfill site revealed a significant presence of congeners below heptabromodiphenyl ethers (H7BDEs), detected in the leachate of the actual landfill, while significant amounts of nonabromodiphenyl ethers (N9BDEs) and decabromodiphenyl ether (D10BDE) were detected in the leachate of the leaching test.