Elution control of radioactive cesium in MSWI fly ash using water repellent treatment

Journal of Material Cycles and Waste Management - Radioactive cesium found in municipal solid waste incineration (MSWI) fly ash can be easily eluted through contact with environmentally sourced...     

The calcination process in a system for washing, calcinating, and converting treated municipal solid waste incinerator fly ash into raw material for the cement industry

Calcination is the second step in a washing-calcination-conversion system in which treated municipal solid waste incinerator fly ash and bottom ash can be reused as raw material in the cement industry and can decompose or stabilize hazardous compounds, reduce residue amounts, and alter residue characteristics. In this research, only fly ash is discussed. Chloride reduction is important if treated fly ash is to be reused in cement; however, the relationship between washed fly ash properties and chloride reduction by calcination is not well understood. This study used washed residues of three types of fly ash-raw fly ash (RFA) from the boiler or economizer of an incineration system, fly ash collected in a bag filter injected with calcium hydroxide (Ca(OH)2) for acid removal (CaFA), and fly ash collected in a bag filter injected with sodium bicarbonate (NaHCO3) for acid removal (NaFA)-in calcination experiments with varying temperature (400-1100 degrees C) and atmosphere (100% nitrogen [N2] at 25 mL/min or 10% oxygen [O2] [90% N2] at fluxes of 25, 50, and 75 mL/min). From the perspective of chloride reduction, heating to 1000 degrees C with 1-hr heating time, 1-hr holding time, and an atmosphere of 10% O2/90% N2 was most suitable for calcination. Under these conditions, chloride levels were reduced by 91, 52, and 96% in washed residues of RFA, CaFA, and NaFA, respectively. Among the washed residues, the weight of the washed residue of NaFA decreased the most.     

PCDDs/PCDFs and dioxin-like PCBs: recent body burden levels and their determinants among general inhabitants in Japan

OBJECTIVE: The objective was to grasp the recent body burden levels of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and dioxin-like polychlorinated biphenyls (DL-PCBs) and to investigate their determinants among general inhabitants in Japan. METHODS: This study was performed on 1374 participants aged 15-73 years, who were not occupational exposure to PCDDs/PCDFs and DL-PCBs, living widely in 75 different residential areas of 25 prefectures in Japan. Seven PCDDs, ten PCDFs, twelve DL-PCBs, which are assigned a toxicity equivalent factor, and biochemical factors were determined in fasting blood. A questionnaire survey on life-style was also performed. RESULTS: The median of total toxicity equivalent (TEQ) was 20pgTEQ/g lipid. The TEQs of PCDDs/PCDFs, DL-PCBs and total TEQ increased with age. The intake frequency of fish-and-shellfish was positively associated with the TEQ of DL-PCBs in both sexes. Current smoking was negatively related to the TEQ of DL-PCBs in male subjects but not in female subjects. Feeding status was significantly related to the TEQs of PCDDs/PCDFs, DL-PCBs and total TEQ, being lowest in breast feeding and highest in never and bottle feeding. According to the results of subgroup analysis, parity was not associated with the TEQs. CONCLUSIONS: The fish-and-shellfish consumption may contribute to the accumulation of DL-PCBs, and smoking may induce some biological action for the elimination of DL-PCBs from the human body. Breast feeding is considered to be one of the major excretory pathways of PCDDs/PCDFs and DL-PCBs in women, while parity may not largely contribute to the elimination of these pollutants.     

Pilot study of intense dewatering of urban sewage sludge

Urban sewage sludge treatment has become a severe problem due to its large quantities and enrichment with heavy metals, refractory organic contaminants and pathogenic bacteria. Accordingly, it is essential to develop an effective and low-cost intense dewatering technique to decrease sludge water content so that it can be easily treated by subsequent incineration, landfilling or composting. In this study, a new intense sludge dewatering technique using conditioner of coagulant and flocculant (polyacrylamide) mixture and the diaphragm filter press was developed and investigated systematically by measuring the water content, calorific value and coliform bacteria in the sludge and investigating the dewatering efficiency under different conditions. The results showed that the water content of the sludge was effectively reduced from 80 % to the minimum of 43.6 % by adding conditioners and subsequent dewatering using the diaphragm press. Moreover, the low calorific value of dewatered sludge increased significantly from that of the original sludge, and was conducive to subsequent incineration. The water content of the dewatered sludge cake decreased to less than 25 % after being kept in the open air for 9 days. Therefore, it is proposed that this technique be applied to large-scale engineering applications.     

An assessment of dioxin contamination from the intermittent operation of a municipal waste incinerator in Japan and associated remediation

Significant dioxin (polychlorinated dibenzo-para-dioxins (PCDDs)/polychlorinated dibenzo-furans (PCDFs)) pollution from a municipal solid waste incinerator was discovered in 1997 in Osaka prefecture/Japan. The cause and mechanism of pollution was identified by a detailed assessment of the environment and incinerator plant. The primary sources of PCDD/PCDF pollution were high dioxin releases from an intermittently operated waste incinerator with PCDD/PCDF emissions of 150 ng-TEQ/Nm³. PCDD/PCDF also accumulated in the wet scrubber system (3,000 μg TEQ/L) by adsorption and water recirculation in the incinerator. Scrubber water was air-cooled with a cooling tower located on the roof of the incinerator. High concentrations of dioxins in the cooling water were released as aerosols into the surrounding and caused heavy soil pollution in the area near the plant. These emissions were considered as the major contamination pathway from the plant. Decontamination and soil remediation in and around the incinerator plant were conducted using a variety of destruction technologies (including incineration, photochemical degradation and GeoMelt technology). Although the soil remediation process was successfully finished in December 2006 about 3 % of the waste still remains. The case demonstrates that releases from incinerators which do not use best available technology or which are not operated according to best environmental practices can contaminate their operators and surrounding land. This significant pollution had a large impact on the Japanese government’s approach toward controlling dioxin pollution. Since this incident, a ministerial conference on dioxins has successfully strengthened control measures.     

Effects of climate and land use changes on groundwater resources in coastal aquifers

To estimate the freshwater loss in coastal aquifers due to salinisation, a numerical model based on the sharp interface assumption has been introduced. The developed methodology will be useful in areas where limited hydrological data are available. This model will elaborate on the changes in fresh groundwater loss with respect to climate change, land use pattern and hydrologic soil condition. The aridity index has been introduced to represent the variations in precipitation and temperature. The interesting finding is that the deforestation leads to increase groundwater recharge in arid areas, because deforestation leads to reduce evapotranspiration even though it favors runoff. The combined climate and land use scenarios show that when the aridity index is less than 60, the agricultural lands give higher groundwater recharge than other land use patterns for all hydrologic soil conditions. The calculated recharge was then used to estimate the freshwater-saltwater interface and percentage of freshwater loss due to salinity intrusion. We found that in arid areas, the fresh groundwater loss increases as the percentage of forest cover increases. The combined effects of deforestation and aridity index on fresh groundwater loss show that deforestation causes an increase in the recharge and existing fresh groundwater resource in areas having low precipitation and high temperature (arid climates).     

Flame acceleration and transition to detonation in an array of square obstacles

We study flame acceleration and DDT in a two-dimensional staggered array of square obstacles by solving the compressible multidimensional reactive Navier–Stokes equations. The energy release rate for a stoichiometric H₂-air mixture is modeled by a one-step Arrhenius kinetics. The space between obstacles is filled with a stoichiometric H₂-air mixture at 1 atm and 298 K. Initially, the flow is at rest, and a flame is ignited at the center of the array. Computations show effects of the obstacles as a series of events leading to DDT. During the initial flame acceleration, the speed of the flame depends on the direction of flame propagation since some directions are more obstructed than others. This affects the macroscopic shape of the expanding burned region, which forms concave boundaries in more obstructed directions. As the flame accelerates, shocks form ahead of the flame, reflect from obstacles, and interact with the flame. There are more shock–flame interactions in more obstructed directions, and this leads to a greater flame acceleration and stronger leading shocks. When the shocks become strong enough, their collisions with obstacles ignite the gas mixture, and detonations form. The simulation shows four independent DDT events within a 90-degree sector, all in more obstructed directions. Resulting detonations spread in all directions. Some parts of detonation fronts are quenched by diffractions around obstacles, but they are reignited by collisions of decoupled shocks, or overtaken by other detonations. Thus detonations continue to spread and quickly burn all the material between the obstacles.     

Self-catalytic degradation of ortho-chlorophenol with Fenton's reagent studied by chemiluminescence

The degradation of ortho-chlorophenol using Fenton's reagent was studied by chemiluminescence (CL). Without a special CL reagent, a weak CL emission from the mixture of ferrous ion and hydrogen peroxide was observed at room temperature. The CL intensity was increased by the addition of ortho-chlorophenol into the mixed solution. When the temperature was raised to 65℃, the CL intensity was enhanced strongly. The CL mechanisms for the system H₂O₂-Fe²⁺ with and without ortho-chlorophenol were studied by examining the CL spectrum, gas chromatography-mass spectrometry and electron spin resonance spectrum. The effects of various free radical scavengers, surfactants and fluorescence compounds on the CL intensity were also investigated. A self-catalytic oxidation mechanism was proposed. The results showed that singlet oxygen was the main emitter for the system H₂O₂-Fe²⁺. The strong CL from the system H₂O₂-Fe²⁺-ortho-chlorophenol was due to singlet oxygen and electronically excited quinone. The benzenediol-like intermediate product formed during the phenol oxidation process greatly promoted the Fenton's reaction and led to higher CL intensity. Chemiluninescence is a novel approach for the investigation of the oxidation of some organic pollutants by Fenton's reagent.     

Atmospheric methanethiol emitted from a pulp and paper plant on the shore of Lake Baikal

On-site measurement of methanethiol (CH₃SH) was performed for three years on ships and cars near a pulp and paper plant standing on the shore of Lake Baikal in Siberia, Russia, to investigate the behavior and impact of atmospheric CH₃SH emitted from a point source. Despite its strong odor, there are few reports on atmospheric CH₃SH, while many investigations have been carried out on dimethyl sulfide (DMS). In this work, CH₃SH and DMS were measured every 15 min by a recently developed automated instrument based on single column trapping/separation and chemiluminescence measurement. Hydrogen sulfide, sulfur dioxide and ozone were also measured simultaneously by individual instruments. Of these sulfur compounds, CH₃SH was dominant and its concentration sometimes reached several tens of ppbv. The concentration of CH₃SH was high at night, because of the lack of photodecomposition and local winds from the mountain to the lake. Such time variation was marked in the summer. The CH₃SH level decreased significantly downwind, while decreases in concentrations of other compounds such as DMS and SO₂ were relatively small. From these temporal and spatial variations, the behavior of CH₃SH is described in this paper. The impact of CH₃SH near the Siberian big sources is discussed with the presented data.     

Control of mercury emissions from a municipal solid waste incinerator in Japan

The control of Hg emissions from a municipal solid waste incinerator (MSWI) is very important, because more than 78% of municipal solid waste (MSW) is incinerated. The Hg content of coal used in utility boilers is relatively low in Japan. In this study, recent trends in the Hg content of MSW in Japan and activated carbon (AC) injection as a control technology of Hg emission from an MSWI are discussed. The effect of AC injection on Hg removal from flue gas in an MSWI was investigated by pilot-scale experiments using a bag filter (BF). The injection of AC increases the Hg reduction ratio by 20-30% compared with cases without AC injection. The Hg reduction ratio increases as the flue gas temperature decreases. The Hg reduction ratio is closely related to the inlet Hg concentration and was expressed with a Langmuir-type adsorption isotherm.