Wind speed pattern data and wind energy potential in Pakistan: current status,challenging platforms and innovative prospects

Environmental Science and Pollution Research - Energy is an essential parameter for the economic growth and sustainable development of any country. Due to the rapid increase in energy demand,...     

Thermal,Rheological, Mechanical and Morphological Behavior of High Density Polyethylene and Carboxymethyl Cellulose Blend

In this study water soluble sodium carboxymethyl cellulose (CMC) was blended with high density polyethylene (HDPE) by peroxide-initiated melt compounding technique. The compatibility of the blended polymers were carried out by silane crosslinking agent. A series of blends were prepared by varying the CMC contents up to a maximum of 50 phr. The physical properties of non-crosslinked and crosslinked blends were investigated in detail. FTIR analysis of crosslinked blend confirmed the presence of Si–O–Si and Si–O–C absorption peaks at 1050 and 1159 cm^?1. Thermal stability of crosslinked blends improved as compared to its non-crosslinked congener. Rheological study of crosslinked blends illustrated high complex viscosity and dynamic shear storage modulus. The tensile strength of virgin polyethylene was 8.1 MPa whereas the maximum tensile strength of 19.6 MPa was observed in crosslinked blend. Similarly lower deformation was observed in crosslinked blends under static load. Scanning electron microscopy of crosslinked formulations also showed strong adhesion between the polymers interface. The compatibility of HDPE and CMC is attributed to both free radical and condensation reactions.     

Toxicological effects of major environmental pollutants: an overview

The last quarter of the twentieth century had witnessed a global surge in awakening against the unabated menace of environmental pollution. Among the various types of environmental pollution, water pollution is an age-old problem but it has gained an alarming dimension lately because of the problems of population increase, sewage disposal, industrial waste, radioactive waste, etc. Present scenario of water pollution calls for immediate attention towards the remediation and detoxification of these hazardous agents in order to have a healthy living environment. The present communication will deal with the toxicological effects of major environmental pollutants, viz. heavy metals, pesticides, and phenols.     

Cytochrome P450 system as potential biomarkers of certain toxicants: comparison between plant and animal models

In present study, we measured the activities of some selected cytochrome P450 isozymes like ethoxyresorufin-o-deethylase (EROD), pentoxyresorufin-o-deethylase (PROD), and N-nitrosodimethylamine demethylase (NDMA-d) treating experimental rats with different environmental toxicants, namely trichloroethylene (TCE), heavy metal mixture, and ethyl alcohol individually or in combination and by exposing the Allium cepa bulbs to increasing concentration of TCE for 48 h. In animal system, NDMA-d activity displayed a remarkable amplification by 4.2-fold in the liver of alcohol ingested rats compared with control animals. TCE intake also resulted in a marked increase of around 3.8-fold and 1.2-fold in rats’ NDMA-d activity in the liver and kidney, respectively. In onion bulbs, an amazing rise in the activity of test enzymes was recorded in a dose-dependent manner. Among the said enzymes, PROD showed maximum increase up to the extent of 22-fold in comparison with control at 20 ppm of TCE exposure, whereas NDMA-d and EROD showed 11- and 9-fold increase in enzymatic activity, respectively, compared with the control. Based on this study, we conclude and advocate that all the selected isozymes of CYP450 system, viz. PROD, NDMA-d, and EROD can act as potent biomarkers in plant system for assessing the TCE pollution.     

Microelectrophoretic study of environmentally induced DNA damage in fish and its use for early toxicity screening of freshwater bodies

This study investigates the potential of the comet and micronucleus assays of fish DNA as a means of screening the toxicity of aquatic environments. Catla catla and Cirrhinus mrigala collected from the River Chenab in Pakistan were used as a case study for the application of comet and micronucleus techniques. Comet and micronucleus assays were used to compare DNA damage in C. catla and C. mrigala collected from polluted areas of the River Chenab and farmed fish. Atomic absorption spectrophotometry showed an acute level of toxicity from Cd, Cu, Mn, Zn, Pb, Cr, Sn, and Hg in river water. Comet assay showed significant (p < 0.05) DNA damage in C. catla representing 17.33 ± 2.42, 11.53 ± 2.14, and 14.17% DNA in the comet tail, averaged from three sites of the polluted area of the river. Tail moment was observed as 10.06 ± 2.71, 3.11 ± 0.74, and 14.70 ± 1.89, while olive moment was 8.85 ± 1.84, 3.83 ± 0.76, and 7.11 ± 0.73, respectively. Highly significant (p < 0.01) damage was reported in C. mrigala as 37.29 ± 2.51, 34.96 ± 2.53, and 38.80 ± 2.42% DNA in comet tail, tail moment was 23.48 ± 3.90, 19.78 ± 4.26, and 14.30 ± 1.82, and olive moment was 16.22 ± 2.04, 13.83 ± 1.96, and10.99 ± 0.90. Significant (p < 0.05) differences were observed in genotoxicity between farmed and polluted area fish. Micronucleus assay showed a similar picture of significant difference in respect to single and double micronucleus induction: i.e., 23.20 ± 4.19 and 2.80 ± 1.07‰ in C. catla and 44.80 ± 3.73 and 06.20 ± 0.97‰, respectively, in C. mrigala. Nuclear abnormalities were found as 6.00 ± 0.84 and 09.60 ± 1.72/thousand cells, respectively, in both species. The results of this study suggest that these novel fish DNA damage assays can be used as an expedient toxicity screening for aquatic environments.     

Biomechanical pulping: a mill-scale evaluation

Mechanical pulping process is electrical energy intensive and results in low paper strength. Biomechanical pulping, defined as the fungal treatment of lignocellulosic materials prior to mechanical pulping, has shown at least 30% savings in electrical energy consumption, and significant improvements in paper strength properties compared to the control at a laboratory scale. In an effort to scale-up biomechanical pulping to an industrial level, 50 tons of spruce wood chips were inoculated with the best biopulping fungus in a continuous operation and stored in the form of an outdoor chip pile for 2 weeks. The pile was ventilated with conditioned air to maintain the optimum growth temperature and moisture throughout the pile. The control and fungus-treated chips were refined through a thermomechanical pulp mill (TMP) producing lightweight coated paper. The fungal pretreatment saved 33% electrical energy and improved paper strength properties significantly compared to the control. Since biofibers were stronger than the conventional TMP fibers, we were able to reduce the amount of bleached softwood kraft pulp by at least 5% in the final product. Fungal pretreatment reduced brightness, but brightness was restored to the level of bleached control with 60% more hydrogen peroxide. The economics of biomechanical pulping look attractive.     

Allium cepa derived EROD as a potential biomarker for the presence of certain pesticides in water

Allium cepa root length inhibition test is a well recommended bioassay for the evaluation of the toxicity of various polluted waters. The utility of EROD (7-ethoxy resorufin O-deethylase) as a potential biomarker of pesticide pollution was investigated using the Allium cepa system. Onion bulbs exposed to model water samples containing any of the six pesticides viz. 2,4-D, HCB, malathion, carbaryl, DDT and endosulphan were analyzed for EROD activity. The pesticide treatment resulted in the enhanced activity of the enzyme, with carbaryl and HCB causing 63- and 53-fold induction respectively with respect to the control at a dose of 1.2 ppb. The industrial wastewater samples from Ghaziabad city of Northern India resulted in about a 68-fold rise in the EROD activity, whereas the Aligarh samples did not exhibit any change within the statistical limit. These results suggest the presence of the test pesticides in the Ghaziabad sample and their absence in the Aligarh sample. Pesticide analysis in the test water samples by HPLC supported this to a large extent. Presence of cycloheximide in the test system brought down the EROD activity, equal to that of control, suggesting the de novo synthesis of the enzyme following the exposure of Allium cepa to pesticides. These studies suggest that the Allium cepa derived EROD can act as a potential biomarker of certain pesticides since even 1ppb of total/individual pesticides brought about >10-fold induction of EROD. We recommend the assay of EROD in the Allium cepa system as a presumptive test for the detection of these pesticides before using analytical techniques like HPLC.     

Biochemical,hematological, and pathological related healing effects of Elaeagnus angustifolia hydroalcoholic extract in 5-fluorouracil-induced oral mucositis in male golden hamster

Oral mucositis (OM) is one of the cancer chemotherapy-related side effects which can affect the quality of life of affected patients. This study was designed to investigate the healing effect of Elaeagnus angustifolia in 5-flurouracil (5-FU)-induced OM in golden hamster. Fifty-six adult male golden hamsters received three intraperitoneal injections of 5-FU at a dose of 60 mg/kg on days 0, 5, and 10. The cheek pouch mucosa was scratched superficially under local anesthesia. Then, two horizontal scratches were made across the everted cheek pouch on days 3 and 4. All treatments were started on day 12 for equal number of animals in control group with no treatments, gel base group that was treated with carboxy methyl cellulose as gel base which used in preparation of the topical gel, topical gel group that used gel containing 10% hydroalcoholic extract of E. angustifolia (HEEA) topically, and dietary group which was treated with 300 mg/kg HEEA. At 2 and 5 days after treatment, blood and pouch tissue sampling were done and analyzed for blood composition, tissue malondialdehyde (MDA) level, and myeloperoxidase (MPO) and superoxide dismutase (SOD) activities plus histopathological evaluations. Both topically and orally HEEA-treated groups showed a significant relief in OM compared to the control and base gel groups. However, the systemic form had higher efficiency in some parts especially decreasing the MPO (0.27 ± 0.17 vs. 0.56 ± 0.17 IU/L) and increasing SOD (6.46 ± 0.15 vs. 5.36 ± 0.18 IU/L) activities in pouch tissue in comparison to topical form mostly at 5 days after treatment. It seems that hydroalcoholic extract of E. angustifolia can be used as an appropriate drug choice for the treatment of oral mucositis based on its healing stimulatory and anti-inflammatory properties.

     

Mutagenicity and genotoxicity assessment of industrial wastewaters

The genotoxicity of industrial wastewaters from Jajmau (Kanpur), was carried out by Ames Salmonella/microsome test, DNA repair-defective mutants, and Allium cepa anaphase–telophase test. Test samples showed maximum response with TA98 strain with and without metabolic activation. Amberlite resins concentrated wastewater samples were found to be more mutagenic as compared to those of liquid–liquid extracts (hexane and dichloromethane extracts). The damage in the DNA repair defective mutants in the presence of Amberlite resins concentrated water samples were found to be higher to that of liquid–liquid-extracted water samples at the dose level of 20 μl/ml culture. Among all the mutants, polA exhibited maximum decline with test samples. Mitotic index (MI) of root tip meristematic cells of A. cepa treated with 5, 10, 25, 50, and 100 % (v/v) wastewaters were significantly lower than the control. Complementary to the lower levels of MI, the wastewaters showed higher chromosomal aberration levels in all cases investigated.