Performance evaluation of an anaerobic/aerobic landfill-based digester using yard waste for energy and compost production

The objective of this study was to evaluate a new alternative for yard waste management by constructing, operating and monitoring a landfill-based two-stage batch digester (anaerobic/aerobic) with the recovery of energy and compost. The system was initially operated under anaerobic conditions for 366 days, after which the yard waste was aerated for an additional 191 days. Off gas generated from the aerobic stage was treated by biofilters. Net energy recovery was 84.3MWh, or 46kWh per million metric tons of wet waste (as received), and the biochemical methane potential of the treated waste decreased by 83% during the two-stage operation. The average removal efficiencies of volatile organic compounds and non-methane organic compounds in the biofilters were 96-99% and 68-99%, respectively.     

Fluoride distribution and the effect of some ions along Alexandria coastal Mediterranean seawater of Egypt

The coastal seawater of Mediterranean of Alexandria receives large amount of discharged waters containing industrial wastes, sewage, and agricultural and domestic drainage. Fluoride and some parameters were( chemical and physical) determined. The data gave indication that the content and the amount of the discharged water largely affect the chemical composition of the coastal water. Stepwise regression analysis was highly significant and the model was very fruitful, where the observed and calculated values were mostly concordant. This may indicated that there was a relation between fluoride content in cosslal seawater and its content in the discharged water.     

Integration and evaluation of a power plant with a CaO-based CO2 capture system

This paper explores the integration and evaluation of a power plant with a CaO-based CO₂ capture system. There is a great amount of recoverable heat in the CaO-based CO₂ capture process. Five cases for the possible integration of a 600 MW power plant with CaO-based CO₂ capture process are considered in this paper. When the system is configured so that recovered heat is used to replace part of the boiler heat load (Case 2), modelling not only shows that this is the system recovering the most heat of 1008.8 MW but also results in the system with the lowest net power output of 446 MW and the second lowest of efficiency of 34.1%. It is indicated that system performance depends both on the amount of heat recovery and the type of heat utilization. When the system is configured so that a 400 MW power plant is built using the recovered heat (Case 4), modelling shows that this is the system with the most net power output of 846 MW, the highest efficiency of 36.8%, the lowest cost of electricity of 54.3 €/MWh and the lowest cost of CO₂ avoided of 28.9 €/tCO₂. This new built steam cycle will not affect the operation of the reference plant which vents its CO₂ to the atmosphere, highly reducing the connection between the CO₂ capture process and the reference plant which vents its CO₂ to the atmosphere. The average cost of electricity and the cost of CO₂ avoided of the five cases are about 58.9 €/kWh and 35.9 €/tCO₂, respectively.     

Preliminary Source Tracking of Male-Specific (F<Superscript>+</Superscript>) RNA Coliphage on Lettuce as a Surrogate of Enteric Viruses Using Reverse Transcription-PCR

The aim of this research was to preliminary track fecal source male-specific F⁺RNA coliphages including human and animals in lettuce. At first, two published virus extraction procedures of ultracentrifugation and PEG precipitation were compared using DAL assay for determining the recovery efficiency in lettuce spiked artificially with three concentrations (10², 10⁴, 10⁶ pfu/100 ml) of MS2 coliphage. The results showed that PEG precipitation had the highest recovery in which the recovery efficiency at the spiked level of 10⁶ pfu/100 ml was 16.63 %. Aqueous phase obtained from the final step of PEG method was applied for enumeration of coliphage and viral RNA extraction in naturally contaminated lettuce samples (N = 30) collected from two sources (market and farm). The samples were then analyzed based on (I, II, III, and IV primer sets) using RT-PCR method. Coliphages were detected in 9 (60 %) and 12 (80 %) out of 15 market and farm samples, respectively, using DAL assay, whereas male-specific F⁺RNA coliphages were detected using the RT-PCR method in 9 (60 %) and 13 (86.6 %) out of 15 samples of market and farm, respectively. Based on the results, only genotype I of male-specific F⁺RNA coliphages was detected in lettuce samples and no sample tested was positive for other genotypes (II, III, and IV).     

Residues of dicofol on cucumber grown under plastic covers in jordan

Abstract

Residues of dicofol were determined on cucumber leaves and fruits under plastic house (PH) and plastic tunnels (PT). Five sprays, 8 d apart, were applied at 0.15% concentration. initial deposits on leaves were 48 and 58 ppm under PH and PT, respectively. In the last sampling date of leaves, the amounts of 191 and 135 ppm were detected under both cultures, respectively. There was a continuous increase in the initial residue after each spray. The highest amount of dicofol (401) was determined 1 d after the fifth spray under PH. The exposure to high residues may pose a risk to fieldworkers.

On cucumber fruits, residues of 0.95 and 1.60 ppm were determined 1 d after the fourth spray under PH and PT, respectively. These residues decreased after 4 d to 0.40 and 1.49 ppm, respectively. Almost no detectable residues could be determined 8 d after sprays number 4 and 5 under both cultures. All dicofol residues on the fruits were below the tolerance level of 2 ppm.